18" Stainless Mount

This J-mount was very easy to assemble and worked perfectly for my Starlink Standard here in Kingston, Jamaica. The mount feels very secure and solid once installed, and I have full confidence in its stability. It mounted easily to the top of a concrete wall and offers excellent value for the price. The weight strikes a great balance heavy enough to feel strong and durable, but not so heavy that it’s difficult to handle or install on your own. I would definitely recommend this mount.

The Proxicast Pro-Grade J-Max mount was incredibly easy to assemble and install. It’s now holding a security camera, and it feels rock-solid and stable. The stainless-steel construction is clearly high quality—well-made, sturdy, and built to handle the elements. Only negative is that it should come with a cap for the open end. Otherwise, great product and worth every penny!

Great quality and worth the $. Replaced a cheap Chinese one that only lasted 3 years. This thing is great, should have bought it the first time. Easy install and comes with all the hardware you need. I have it mounted on my roof holding 3 antennas.

I have a new gen3 starlink dish. Its well known that up until May2024 that the starlink pipe adaptor is garbage. So I needed to improvise. Proxicast has been wildly popular with early generation starlink dishes. I have one of the OAM starlink wall mounts, but the extension pipe is MUCH MUCH to short. The advantage of the OAM wall mount is a very firm connection to the dish itself. So comes in the improvise. Use the proxicast J mount to provide the extension. a standard well made u-bolt pipe adaptor clamp, and the OAM stalink pole/mount. As show in one photo is all three together. install on a facia of a steep metal roof comes next week. Pros: - high quality material - all nuts and bolts included - clear install instructions - pipe diameter is perfect fit (with a couple wraps of duct tape to fit snug) with starlink pole mount Cons: - with this kit, none - with proxicast in general, I wish they had a gen3 starlink pipe adaptor

The material seems to be of excellent quality, and was easy to work with and install. Unfortunately, one of the selling points of this bracket, which is the ability to easily lock at 90 or 45 degrees, doesn't work very well. There is far too much slop in the bolt holes, so the mast is able to deflect substantially from vertical when assembled this way, and thus still relies on friction from bolt tension to hold it at the desired angle. This may or may not be a problem depending on the weight of whatever you're attaching. I'd still choose this over one of the cheap steel ones, however.

I ordered this antenna mount to install an outdoor PoE mesh network access point for my Starlink service. I was looking for a sturdy mount that would hold to the weather. The Proxicast Pro-Grade J-Max 100% Solid Stainless Steel Antenna Mount more than filled the task. I chose the stainless steel mount over the aluminum since it was only a few dollars more. Also, I wanted to increase the height of the mast by adding additional tubing, so the stainless steel should be able to carry any extra weight easily. The mount was straightforward to install. After installing the base support to the wall, there are only 4 bolts to insert and tighten. However, a couple of the base's mounting holes are directly behind the J arm. If you want to use these, you may have to assemble the unit in place rather than on the ground. The two small bolts holding the arm have to be slid in from the inside to the J arm tube. It was tricky holding the bolt inside the tube to line it up with the provided hole while standing on a ladder. I have vinyl siding, so I wanted to use the facia board on the soffit. The base support is a bit large (over 7 inches) and my facia boards are not that wide. I wound up using a front corner that gave me more surface area. Since I wanted to add to the mast height by a few feet, I used 1-inch PVC schedule 40 pipe. That size was almost perfect and slid fairly snuggly into the Proxicast J arm. I inserted the PVC pipe to the bend in the J-arm and added a few feet of length. I used 2 additional 1/4-inch bolts to secure the pipe. All in all, a very solid installation.

Yes, good stainless with nice finish and a strong bracket. But pictures of the 36" shows an asymmetric pole, which gives the option for either taller or farther from the mount. What was delivered is symmetric. If it is reversed, the payload is in exactly the same position. Oh well, it works, but it is not what they advertise.

Still rock solid after a year and some windy storms. No complaints! Holding a 30 ft rooftop ham vertical Comet multiband. Guessing 10-15 lbs? Not much weight. Pretty easy to install and adjust on peak even while leaning out over oblivion with a power drill.

I sent this up from my Starlink dish. I added the extension that you can buy works great I haven’t had a problem. Need clean, stainless steel no issues.

El soporte quedó perfecto para la antena Starlink. Lo instalé en pared en un ambiente cercano a la costa, porque el primero que instalé hace un año no era de acero inoxidable y se oxidó muy rápido. Espero que esta me dure varios años.

I was impressed with the quality of the mount and how easily we were able to set it up with our Starlink system. Would highly recommend this mount.

Muy bien excelente muy rápido internet 300 mgas

Worked perfectly for me - a Starlink antenna install. Decent gauge SS.