Epoxy Resin Crystal Clear: 64OZ Epoxy Resin kit Fast Curing Heat Resistant for Casting Coating Art DIY Craft Jewelry Wood Table Top Flower Preservation- 2 Part(32OZ Resin and 32OZ Hardener)

Perfect product. Very easy to mix, pour, and fill and created a crystal clear end product. Multiple applications were no issue with bubbles or clarity and it sealed the holes rotted section of wood fullu. Lastly it is sandable

Used this to preserve my wedding flowers having had no prior experience with resin. It worked great! I didn’t warm it at all and still had no bubbles form. I think I went overboard with a lighter trying to pop the tiny bubbles inside, not realizing they would go away, so one layer has a bit of a burnt look to it but that wasn’t due to the resin, just my own fault. Excited to see how it holds up but happy so far! I did have to order twice to fill the mold I had ordered, though.

This is the first time I've used this brand of Epoxy. We use these for custom coasters that we 3D print bases for, pour acrylic paint in, and then pour epoxy over the top to protect the paint. We've done hundreds of these so far. This is a fairly thin epoxy when pouring, which is great if you need it to spread and fill in small gaps. It was noticeably thinner than the previous 2 part epoxy we were using and the set up was affected by this difference. This epoxy took longer, about 12 hours more than the thicker epoxy to set up until it was hard enough to resist a finger nail. Total cure time was about 36 hours compared to 24 hours on the previous brand. I don't think this is a big deal, but something to consider for your application. Our pours were also very thin, about 2-3 mm in depth so curing would take longer for a deeper pour. The thinner nature also means bubbles more easily came to the surface to be popped with a heat gun. The previous thicker epoxy didn't have any problems but again our pours are very thin and if you are not using a vacuum chamber to pull out the bubbles prior to pouring a thinner epoxy like this might really help avoid bubbles in your pour. Overall I think this is nice epoxy and a decent price. $32 for a half gallon is reasonable, and quite a bit cheaper than the smaller sizes on a per oz basis. Obviously if you need a lot going for a gallon or a bucket is going to be more cost effective. But for smaller crafters a half gallon will last a long time.

It’s over very good. I needed a torch for the bubbles though

This is the only resin that I use for my projects. It is so easy to mix, has no obnoxious smell and a forty minute working time. My projects turn out very clear and durable. I love that you can order different sized bottles depending on your needs. My only go to resin. Definitely recommend this product.

This resin was available on delivery for that same day on both occasions making it my go to when ordering out of all other options. It came double packed with a tight seal under each bottles caps keeping it all intact in case of delivery accidents. Price was lower than most for the amount or volume, & quality was top notch giving it 5/5 ⭐️! Working time , mixability and cure time were all above average in my experiences working with epoxy resin. Low odor, little if any bubbles I recall not having to use very much heat to get rid of bubbles. Perfect coverage and thickness with easy to read instructions for mixing making this is my most favorite resin when it comes to making geodes or my canvas arts or anything to do with epoxy resin by far

Excellent resin. It worked well for my uses. Dried clear. No air bubbles. Started to harden quickly, though, so need to ensure you are ready to use it once mixed.

Love this epoxy! Easy to use, and works great. Nice and clear. Easy to get the air bubbles out, just follow the instructions. I have bought multiple times and would buy again