Furmax 55 x 24 Inches Electric Height Adjustable Standing Desk Large Sit Stand Up Desk Home Office Computer Desk Memory Preset with T-Shaped Metal Bracket, Black

The desk arrived right on schedule and was packaged securely. I went with the black color and the finish looks clean and solid in person. It feels sturdy once fully assembled. Putting it together was pretty straightforward. The included tool is enough for most of the job. You’ll only really need a second person when flipping the table upright — everything else can be handled solo. The tabletop comes in two sections, but once assembled they sit almost perfectly flush. There’s barely any visible gap between them, and it looks seamless from normal viewing distance. The height adjustment is smooth and quiet, which I really appreciate. One small downside: the small wood screws that connect the two tabletop pieces (using the steel bracing plates) could be better quality. The heads can strip if you’re not careful. A few tips from my experience: 1. Make sure you’re using the correct size screwdriver so it fits snugly in the screw head — that’ll help prevent stripping. 2. Avoid using power tools unless you’re absolutely sure of the bit size. The included hand tool actually works well. 3. The bracing plate holes may look slightly misaligned with the pre-drilled holes. That seems intentional to help pull the two tabletop pieces tightly together. Tighten both screws gradually instead of fully tightening one at a time. 4. Pay close attention when installing the rotating shaft that connects the legs. Both legs need to be set to the exact same height before attaching it. Measure and adjust using the leveling screws at the bottom to make sure everything lines up properly. Overall, I’m happy with the purchase. For the price, it feels like a solid, good-looking desk that performs well.

Very easy to put together seems sturdy. I put this together myself and waited until my husband came home from work to flip it upright. Seems to work well, can't beat the price.

Very well designed product: packaged quite well, very good assembly instructions, sturdy, hardware package with separate pack of extra parts

Im a real person, this is a real review. I am using this desk as a gaming station, so I won’t be moving the height up and down constantly. I did however need a desk that would be the correct height so I could be eye level with the center of the monitor. As most desk are 29” tall. I purchased this desk after hours and hours of research. I was considering desk anywhere from $80-$800. After looking around I realized I really don’t need an $800 dollar desk. After reading multiple reviews on $200-$400 desk, it seemed the negative review were relevant to the negative reviews on this desk. For the price, I decided to take a chance on it. The desk came in a small package probably 58x27. Packaging was surprisingly pretty good, lots of foam and corner blocks for the edge of the table. Installation instructions were clear and easy to read, all guide holes were where they were supposed to be. Overall took me about 20 minutes to put together. After putting a PS5 and Two monitors on the desk I did notice the motor seems to be somewhat weak however lifted the desk up and down just fine. I would be a little weary if you are planning to move the desk up and down constantly. I’ve moved the desk up about halfway and still feels very stable. As I mentioned earlier this will probably be a set it and forget it desk for me so it’ll work great with no concern. The top is not a solid top, it does have a seam going down the middle of it but the top is still very flat. Overall, for the price I don’t think you can beat it if you want a basic, cheap stand/sit desk.

Thank you! Thank you! Thank you! Just let me list all the good things: 1. Bought it on a limited time deal at a great price. 2. Great engineering: every screw hole lined up perfectly. 3. Clear, simple instructions, and very easy to put together, even for this 70 year old woman. Only time my husband helped was to carry the box to my craft room and to set the desk upright (which I could have done, but husband's do enjoy being needed). 4. So, so simple to connect turning rod to motor. 5. The motor works ultra quietly with very smooth lifting and lowering. 6. Shipped quickly and arrived earlier than expected. 7. It was packed so well that even FedEx was unable to destroy it. That in itself is amazing. 8. All the pieces were in perfect condition, and hardware so clearly labeled that a 3 year old could easily be your helper. Each packet had exactly the right amount, and there was a second packet labeled extras, which was very thoughtful. I purchased the 55 inch desk, which is perfect for my crafting, and when I want to sew, I raise it to the higher level to cut out fabric, which makes it a lot easier on my back. I enjoy making wreaths, diamond painting, sewing and I paint with acrylics on canvas. It accommodates all those things, but would make a great computer desk too for the office. Now for the bad points: Uhmmmmm... Oh wait ... There is one. I didn't particularly like the cover for the hole that cords go through. But then again, I don't use the cover so Nope, not a bad point for me.

This has been an excellent purchase for me. Inexpensive, light weight, but totally stable for my three monitors, keyboard, cpu, and all the junk that seems to gather on my desk top. I raise it up and down multiple times a day bc I like to stand during online meetings, and sit for document editing, etc. It is easy to adjust. Because it is sleek with a small foot print, it leaves my office feeling tidy and uncluttered (except the desktop, which is on me).

I previously purchased this desk a few years ago for my home office and had no issues with it. Based on that positive experience, I ordered another one for my boyfriend’s apartment. Unfortunately, this purchase has been extremely disappointing from the start. When the desk arrived, the instruction package was completely empty. I had to search for guidance and eventually found a video to follow. After laying out all the parts, I discovered that multiple screws and bolts were missing. At that point, I initiated a return, understanding that a refund would only be issued once the item was received back. However, since I needed a desk immediately, I decided to resolve the issue myself. I spent nearly $50 at Lowe’s and Harbor Freight—making multiple trips just to source the correct hardware and tools. After finally obtaining everything needed, I began assembling the desk. The process went relatively smoothly until I attempted to attach the controller for the standing function. The screws would not hold, and the piece pulled straight out of the desktop. It then became clear that this item had been previously returned and resold. There were obvious signs that someone else had encountered the same issues, which explains the missing hardware and instructions. Despite this, I continued trying to make it work. After completing assembly, the controller failed to operate the desk properly. Upon reviewing the instructional video again, I realized a critical motor mounting component was entirely missing. Without it, the motor cannot be secured, and the desk cannot function as intended. One side lifts slightly before triggering an error, rendering the standing feature unusable. After investing significant time, effort, and additional money into trying to make this desk functional, I am left with a product that does not work at all. I am not willing to disassemble and return the desk after everything I have already put into it—especially considering I never even received a return shipping label. This has been an extremely frustrating and unacceptable experience. I am requesting a full refund without requiring the return of the item, given the circumstances and the substantial effort and expense I have already incurred.

This review is the "brown" 55 x 24 inch Electric Height Adjustable Standing Desk (for work proprietary reasons, I cannot provide a photo): I mulled over which standing desk to purchase for quite some time before finally selecting this model, and I'm so happy I did. I had originally bought a huge corner desk (not adjustable) for work-from-home tech job, but I found that sitting for 8-hours a day, particularly from home, was killing my back and my neck. I knew I needed a standing desk, but I was so hesitant about the purchase because I didn't want to break the bank on another desk when I had only had the first desk for less than 3 months. This desk is relatively easy to put together. I had it done in about 30/45 minutes. I've been using it now for about 5 months, and I raise and lower it multiple times a day while working. It has never faltered. It's got 2 programmable settings for height, so obviously I keep one at my standing height and the other at my sitting height, and I can easily toggle between the 2 while I'm working. I did purchase a monitor stand that attaches to the back of the desk and holds the monitors (dual) above the surface of the desk, so I've got more space. The desk is actually much larger than I thought it would be, but I imagine the size would be impacted a bit if the monitors had to rest on the desk. I'm not sure how or why, but the cost of this desk has dropped about $20.00 since I purchased mine. All in all, I would HIGHLY recommend this desk if you're on a budget and would like the option of standing/sitting while working. The motor has never had one issue, and I really do like the faux wood grain of this desk. It's not "cheap" looking at all. This is one of the better purchases I've made.

it came next day of ordering and i Assembled it very easy with the manual everything is good quality and as described very good product

Incredible value - my first such desk and I love it. Of course, at this price some compromises had to be made... There's no cable management, and at full height the desk shakes quite a bit. There's only two memory slots (which is fine for me, but less than other tables). The desk moves up and down at a decent speed. It isn't too loud (I don't know how loud they should be but I'm not bothered by it). So far it works great - the quality of the top table is solid - it's made of a hard (engineered?) wood - won't scratch easily. I've accidentally brushed a knife edge against it and not scratched it yet.

Quality of product is good. Works perfectly. Support team reached out and explained before shipping that there is intentional cut on table top. They shared photos and videos over whatsApp. Took half an hour to assemble. Instructions booklet was easy to follow. Happy with purchase.

easy to set up and great for the price

Motor is working fine but table top wooden is already broken