Kathfly Acrylic AB Sheet Colored Translucent Acrylic Iridescent Radiant Sheet Laser Cutting Board Panel for Glass, DIY Painting, Art Craft, 2 Sides Rainbow Like, 8 x 12 in(4 Pack,1mm Thick)

My daughter loves holographic stuff and she loves art. So I bought her these to do art work on and then frame for her room. They are super pretty and could be used for lots of different projects

Perfect for rc tank glasses

I cut these out on the lazer cutter and made a vest.

For anyone looking to laser cut this, it works fine, with one minor issue. The iridescence is a film adhered to one side. That film can be affected by the heat of the laser, causing minor "cracking" and shrinking in areas. However, the flaws are under 1mm from the edge, and are only really noticeable in areas where the laser was doing a lot of tight cuts. That is my only complaint for the product. Otherwise, the iridescent effect is beautiful, and the plastic is your typical laser grade acrylic. Its worth pointing out that this is 1.6mm thick (about 1/16") rather than the more common 3mm thick (about 1/8"), so be aware of that. Also, as usual, the sheets come with a protective peel off layer that should be left on during cutting and peeled away after.

The manufacturer's picture exaggerates the "iridescent" quality. You only see the shades of purple and blue when the light is just right. Otherwise, the plastic is simply transparent.

The iridescent film fracture around every edge you attempt to cut. This seller is using "Acrylic" and "AB", in the title, this is definitely not ABS. It snaps apart almost like glass. This seller is taking some liberties with measurements too. It measures at .75mm as shown in my photo.

I thought this would be standard 3mm sheet but it’s actually like 1mm or even less. It’s super flexible and breaks easily. It also has a weird reaction when cleaned with rubbing alcohol. It’s still very pretty and I’m sure has some use, but not what I was looking for.

These sheets look fantastic and would have been great for my project if they weren't damaged. All three had scrapes and gouges that went through the protective film and into the acrylic itself. The damage didn't happen during delivery; the outer shipping envelope was in good condition when they arrived.