YIHUA 926 III 60W Digital Soldering Iron Station, with 2 Helping Hands, 194ºF~896ºF Adjustable Precise Temp, °C/ºF switch, Sleep & Calibration Functions + 6 Extra Solder Tips, Solder sucker &Tweezers

Works! I used what came in this kit and followed a tutorial on youtube to desolder a connection point and then resoldered back on a switch that fell off of the ignition chip of my electric chainsaw when I overheated it. It worked, and my electric chainsaw is back up and running again! Worth the attempt in my opinion! It was a little nerve wracking and my solders look really bad because I have no skill what-so-ever at using the soldering iron yet - but I repaired a $109 electric chainsaw for about 1/3 of that price in tools. I was also not aware that I was going to need to remove the leftover solder from the connection point before soldering the piece back on - so that fact that the little suction tool that I needed to do that was already in the kit was pretty cool! Great little kit that functions well, I recommend it. Id say if anything was missing - I did need some glue for the components that I was reattaching that was not in this kit I just used some superglue that I already had on hand. Also, I used some rubbing alcohol on a Q-tip to clean the components. (Just things to be aware that you might need!) I'm also going to use this little kit to solder some replacement zippers onto an old backpack. All-in-all, its been a great buy!

I picked up the YIHUA 926 III 60W Digital Display Soldering Iron Station Kit as a beginner, and overall I’ve had a really good experience with it. Pros: Comes with everything needed to get started Easy to set up and use Heats up well and solders consistently Extra tips and helping hands are a nice bonus Cons: No storage case or organizer included Would really benefit from a built-in magnifier with a light In actual use, it performed well and made learning soldering much easier. Setup was straightforward, and it didn’t take long to start working on small projects. The included accessories are a big plus, especially if you’re just starting out and don’t already have tools. My only real complaints are around convenience. A storage case would make it much easier to keep everything organized, and a magnifier with a light would be a huge upgrade for detailed work. Overall: Great value and a solid starter kit. If you’re new to soldering, this is a really good option, just be aware you may want to add a few accessories later.

Excellent value! I’m coming from a generic pencil soldering iron and a big trigger pull iron and I mainly work on guitars and tube amps. This new one is so much better and really heats up fast and holds temp. Great for occasional use, but is plastic and at this price, it is obviously not designed for a serious pro or daily shop use. Note, some complain about the helping arms not staying in place but make sure to use the supplied nuts that come with it on each arm, and tighten those to the side, not tighten just the arms to the side. (Watch the video!) Pros: Heats up quickly. Easy to read temp display. Holds temperature. Place to hold a roll of solder Helping arms are great and easy to move, has plastic removable ends Small and does not take much room, self-contained, looks good Multiple tips supplied, a place to store all, and all actually work well Supplied solder works well, love the roller Arms can be removed Long cord on the soldering iron making it easy to keep the cord out of the way. Cons: Power cord to the unit is way too short. At least have it long enough it will reach the floor from a standard height table. Could have used a small movable led light, maybe as an extra arm. Heating at the tip is sometimes lacking. I’ve measured the area about the tip to temp, but at the tip it can be significantly less. Overall, I'm crazy OCD doing research and this is the one I landed on after hours of looking around. I've not found a better one with all the accessories in any brick and mortar store nor one at this price online that gets these reviews.

Wasted a lot of time and money on 450° and straight hot soldering irons. Wasted a lot of guitar pots do to wrong heat. This baby here solved all my problem. Heats ups great. Quality of work tobe done looking much better. Made it's own station. Everything together now easy to use and move and store. Those two helping hand clips work so great making all things easier and no burnt hands. Came with everything one might need and instructions all.

I bought this soldering iron for occasional use on guitar repairs. Since I do not solder daily, this looked like A good choice for light duty. The first time I used it, I set the temperature to 700 degrees, and try to tin the tip. Even though it was set to 700, it would not melt the supplied solder. After about three minutes, I was able to tin the tip, but still not able to transfer enough heat to tin a piece of wire. I held the tip to the wire for over one minute but, it still did not transfer enough heat for the wire to tin. I tried using leaded solder to rule out the possibility that the supplied led free solder was the problem, but got the same results. Since there are so many positive reviews, I am assuming that there is something wrong with this unit. I am going to give it another chance and exchange this one and see if a replacement will heat the tip more accurately, If the replacement works, I will update my review. Update: I just received my replacement two days ago and finally got a chance to test it. The replacement works fine. I'm giving this a 5-star review because I got it for occasional soldering projects. The package comes with everything one would need to get started, and for the amount of use that I will be giving it, it will probably last years. I doubt this device will hold up for more than a year with heavy use. It's very functional but made of cheaper materials.