Bike Crank Extractor/Arm Remover and Bottom Bracket Remover with 16mm Spanner/Wrench. Professional Bicycle Repair Tool Kit

Worked perfectly on my walker h9 ebike. Process was easy and the crank extractor was durable and affordable . It Took only 2 minute to get job done with the tool

This worked perfectly. There are a few tricks to make it do so. First you need a high pressure grease. If you are working on your own bike you should have some already. Apply a dab to the threads including the threads of the part that attaches to the crank arm. This keeps the aluminum from sticking to the steel. Second, use a square nut or make a square steel slug to sit on top of the crank spindle. This will prevent the threads from being damaged. This is why the Park Tool tip breaks. The tip on this one is solid. Third is the real trick. Apply heat! The crank arm is aluminum and the crank spindle is steel. They will and do stick under pressure. Put tension on the tool, then heat with a heat gun. This will expand the aluminum. When you cannot touch the metal finish removing with the tool. No need to blister the paint, it doesn’t need that much heat. Final note: the part that threads into the crank arm only needs to be finger tight. If it doesn’t thread in, your crank arm threads are damaged an need to be cleaned and repaired. BTW: The tool to remove the nut holding the bearings is a 1/2 inch drive socket ratchet. This was not a problem for me as I had rachet of this size. As with all ratchets, it is best practice to support the ratchet head while using. I had no damage occur during use. If you have a swivel handle ratchet, aligning your hand in the same plane as the BB nut will also reduce the twisting of the tool.

Great price. While the chrome kinda gives them a "cheap" look they feel rather solid. The crank remover tool worked just fine with no issue, screwed into the crank without a problem or hard to the crank. The BB removal tool is heavy and feels like good steel. Worked just fine taking the BB out of my fixie and putting the new one in! Did not damage the spindle or threads for the spindle bolts. These tools worked for what I needed and saved me alot of money. Even the little wrench feels solid, not flimsy or weak at all!

This worked on my Shimano LX Crank! It is a small handle but, perfect to put in bike pack when riding. I had some other big bike pullers but were way too large for the Shimano's. I was hoping this would be OK, and was! I am happy I could get the crank off after 25 yrs. This time I am using Never Seize!

Easy to use Worth every single penny

Did the job and the price was right.

The right tool for the job. This made a complicated job, easy.

No complaints. My experience with these job-specific tools (crank arm / bottom bracket) was about 30 years ago, probably with expensive Park brand - at the local / now closed bike shop. I needed this for my old 1996 GT LTS-3 that I'm refreshing. It's pretty inexpensive, and works just fine for pulling the crank arms and Shimano sealed bottom bracket unit. About the only other tool you would need is a 1/2 inch drive long breaker bar for the bottom bracket removal, but mine was pretty stuck though. Pretty decent combo tool, for the price.

Perfeito para o fim a que se destina, boa qualidade. Recomendo

Outils achetés pour remplacer le boîtier de pédalier de mon VTT, et enfin j'ai pû le démonter. Par contre prévoir un levier suffisant afin d'avoir la force de dévisser le boîtier et sortir les manivelles. Clé Allen de 14 ou clé plate de grande taille fortement préconisés... La qualité globale est satisfaisante, tout se visse bien, j'ai pû procéder au remplacement de mon boîtier pour la toute première fois et il en avait besoin. Rien de mieux que le DIY. Démontage ET reassemblage sans soucis.

Gutes stabile werkzeug qualität auch super für den preis hält lange

I haven't used this crank remover on a real bike yet, but I did need it for removing the plastic panelling from my exercise bike, and to do it I needed to remove the cranks. Comes with no instructions, but you don't really need them; put the wrench on the hex nut on the crank, screw the removal tool into the crank, unscrew the crank, unscrew the removal tool, and it pops right off! Worked first try and saved me a lot of blood, sweat, tears and broken ratchet adapters.

部品を交換したくて購入しました。おそらく使用するのは最初で最後だろうと思い安価なものをと思い購入しましたが、使用に問題はありません。耐久性は分かりませんが、1回切りと割り切るなら充分使えます。