Universal Motorcycle License Plate Bracket with LED Light Fender Eliminator Kit CNC Aluminum Motorcycle Tail Tidy License Plate Holder Mount Black

This fender eliminator was perfect for me. I have an odd Italian bike that there is not much for unless you want to wait a long time. I couldn’t find anything that looked like it would work. I bought this mainly on price, and knew that I could return it if it wasn’t going to work. I was pleasantly surprised with this unit. It’s well made for the price; I wasn’t really expecting much. It was mostly assembled, but loose. I installed the LED plate light, and proceeded to fit it to my bike. The spacing on the mount was perfect for two of the holes left from fender removal. It went on using the factory screws that held on the fender. The adjustment is good to get the angle right, and it fit well. My only suggestion would be to tighten the screws, then back one out at a time, and use some blue thread locker before final assembly. Do not crank down on the screws, the unit is just aluminum, and the screws are stainless. All in all, I think this is a good value for the price. It’s fairly inexpensive, and looks good too.

This product is a fantastic find! It's reasonably priced, making it accessible for most budgets without compromising on quality. The product is exactly as described, and its usefulness cannot be overstated. I've found it to be incredibly practical and efficient in meeting my needs. The attention to detail is impressive, and the performance is on par with more expensive alternatives. If you're looking for something reliable, well-made, and at a fair price point, this is the perfect choice. Highly recommended!

I bought this for my bike and it wasn’t a EZ install to get it to fit on the 300ss. Had to temporarily remove it just to get the wiring harness back inside the storage area due to it coving the wire hole. All in all it was an ease of installation, shockingly it very sturdy and definitely looks really good on my bike. And for the price wow just amazing. Only downside I really had was the wires for the license plate light suck and definitely have to go and re do it before I go out night riding.

I only rated the FINISHED product five stars. To install on my CF Moto 650 NK I had to cut the corners off the piece that mounts the bracket to the bike. Then I filed the corners smooth and shot a bit of spray paint on it. Even after this modification, which I done only to get the bracket to fit into the recess on the bikes body, I had to drill out new mounting holes for the bolts to actually attach the bracket. Now that the bracket is on the bike you'd think you're good to go but you'd be wrong because the final section doesn't tighten down completely, and I read of this condition on this or another bracket, but I ordered this one anyway. You have to take the bolts out and install a washer OR you might be able to drill out the holes the bolts GO THROUGH, which are threaded but they shouldn't be because there are nuts on the backside, which tighten the bolt. The wires for the license plate light are like hairs, after carefully stripping I soldered them THEN attached them to the bikes wiring with crimp fittings. THIS IS NOT A DIRECT OEM FIT. But, at this price if you have the tools and are at all mechanically inclined you will be happy with the end result and you can rate your install five stars, because by the time you're done you'll deserve it.

Absolute junk. Fit is terrible on my crf450RL, but I made it work. Literally snapped in half first ride and my plate flew off the highway. You are better of lighting your money on fire than buying this hot hunk of garbage

I have yet to ride with this on my bike but I have installed it and it fits great. once you get it it is quite loose and you will need to tighten all the allen screws. Once you do that it should be super sturdy. I may remove the bolts and add loctite for piece of mind but other than that this fits and looks great. it was bolt on for an 07 FZ6 fit great.

Installation was easy and the price was a good value. The screws just won't stay tight. Came out to find the assembly dangling leaving me nobiption but to rip the wire off in order to make it home. 🙁

I wanted a change, so I did a tear down and build up or my Honda VTX 1800 C. I always hated the factory tail light and license plate bracket, so I deleted both and replaced them with this and multi-functional brake / turn signals. I had to tap a few holes to the underside of my fender and have the bracket mounted there. I am thrilled with the look. I'm writing this review a little over a year of installing this, and this is a good thing. First and foremost, use locktite on the allen screws which hold the turn signal arms on. I had one come loose and get trashed between my tire and fender. This is why I gave Sturdiness only 4 stars. During that same incident, I the wires on the license plate light broke at the base. (This next part is why I decided to finally write a review). I was looking to replace the license plate light, so I contacted Kemimoto to ask if I could buy one. With only 2 emails to each other, they had a replacement to my door in 2 days. This is incredible customer service. Of course, my installation is more "custom" than most, but it's a testament to what you can do with this.

Quality is bad

Excelente produto, recomendo.

Very well built , comes with LED tag light . Can be adjusted . Was very happy with purchase. Fit my 2012 Honda cb1000r perfect .

ما يركب على دبابات ريس سوزوكي بالتحديد gsxr600 رغم انه مذكور بالاعلان ان يتوافق معها

Good items