Performance Tool W54232 Lever Action Fluid Dispenser Pump

Works good. It's not over built so it can't be abused much. I used it to prime an engine with oil so it DOES provide decent pressure. Must use hose clamps if used with an obstruction or it will blow hose off. 3/8 hose will fit it tightly.

I bought this to pump 90W gear oil from a 5-gallon bucket to smaller containers for recycling. The hose ends are just pressed on so I went ahead and put 1/4" hose clamps on both ends before I used it based on the mess others reported. I'd say they were correct because although it seems like low pressure when you are pumping heavy oil it creates a lot of pressure in the hose. **NOTE: The free HF 5 G buckets are NOT standard size and this will NOT fit the top. The HF is larger in diameter. TSC buckets and WM buckets are the standard diameters that will accept lids and this pump. PROS: 1) I pumped heavily sludged oil with this from an old Farmall H with zero pump/hose leaks. You do need to pump more slowly the more heavy the oils is otherwise something may give. The bottom line is it will work. 2) The pump slides up or down in the lid in case you don't want to be right on the bottom. 3) The pump has stand-off feet to maintain an air gap if it is on a flat bottom. 4) It saves your back and prevents a major mess trying to dump 5 G of oil into a funnel on a smaller container . . . I know. 5) Zero leaks 6) Price CONS: 1) you need to supply 1/4" hose fittings to reinforce the hose connections. 2) The hose is cheap PVC, but it worked for me. I'm not sure how long it will last and trends to fold where it comes out the top of the pump, however, the pressure expands it open.

For the price, this was a pretty good deal. I pumped my first 10 gallons of Super UDT2 into my tractor without a problem. However, there are a few things to know here. The hose they send is pretty sad. I haven't yet upgraded it but it probably needs to be replaced. It kinks at the outlet and needs to have a lot of help to remain open and it really needs a clamp because if you don't clamp it, it will spit the hose off in a hurry. Also the nut through which the plunger travels must be tightened or it will leak. I suspect this is where the other reviewers were complaining about leaking. There is also some assembly required so be ready for that. But my biggest gripe is that there is no hole in the top of the steel lid into which I might put the feed tube. So I had to keep an old jug around to let it drain. That seems really odd to me. But for the price, it will get lube into your tractor (or whatever) much more easily than you can do it with a funnel. Temping to give three stars, but aside from these shortcomings, it works well.

Works great very happy

Built Cheaply but I replaced 4 of there nuts an bolts with my own. An drilled a hole for filler so it could leak back into bucket . All in all great for the price

Worked as it should

Had to flush the trans on my truck. This worked great for pumping new fluid into the trans while old fluid was coming out the return line. So far so good on quality! Make sure you tighten down all the fittings first before pumping any kind of fluid through it. I forgot to do that and fluid started leaking through. Tightened them down, and no more problems. Was missing a couple pieces of hardware but it did not keep me from assembling and using it.

Bought this after needing to replace our gear oil pump that's been leaking forever. Put this together and was going good until I was tightening the the clamp so it would stay in place and it snapped. Not very durable of a product.

Drilled storage hole in lid so hose doesn’t make a mess, also added small hose clamp as hose blew off while pumping 75w-90 gear oil. Takes about 60 pumps to fill a differential. Works well after minor modifications, lid fits securely on bucket

excellent

Nice lil pump that works for black fluid film! Seller gets all the stars for being so responsive ! Greta customer service !! What I don’t like is the delivery & how both packages & items arrived all scratched up & chipped paint !!! A lil disappointing

I used for replacing the 80w90 gear oil on my tractor front axle. The pump worked flawlessly. I'll echo the comments of other reviews that clamps are needed on the pvc hose otherwise it will pop the hose off. Excellent pump!

Parfait