919-219 Stainless Steel Brake Line Kit Compatible with Select Chevrolet/GMC Models (OE FIX)

good fit, good quality, quick delivery. No one enjoys doing a complete brake line replacement on an old, rusty pickup. Having quality parts that fit makes this awful job much more manageable.

I broke a brake line... the rear of all things, and on the silverados it runs from the distribution block to the rear axle, above the fuel tank. What a pain in the butt! I did not feel like changing all the lines yet, therefore I of it to work with the time and tools I have. It bolted right up, the fittings were perfect, length was great and when I do the other lines I know these will fit great. I would buy again, but I hope I dont need to. And I would recommend to a friend

These Lines are a direct OEM replacement for all of your brake lines, they fit as they should. I already had the bed off to do fuel lines as well which helped. Remove the driver side cab bolts and lift the cab off the frame for easier access to remove and replace the old lines.

This kit is a fair price kit. It comes with everything you need. Clearly marked where you need to bend the tubes back straight. If I ever need to do a job like this again I would reorder.

Fit my 2003 Chevy 2500HD crew cab, standard bed perfectly. Was not necessarily an easy job, but for having never run brake lines before, it wasn't as bad as I thought it might be. Only tricky thing was I had to partially drop the fuel tank to run the rear line. All the lines were included, and I had zero leaks. Hoping these don't rust out like the OEM lines that were on it!

Fit well. Good quality .

Replacing brake lines is not fun when the whole rest of the vehicle is there but a couple of hours on your back in the driveway (a lift would help) and you can drive the vehicle again, being stainless you should not have to change them again.

These fit 2005 Silverado Crew Cab 6.5 Bed with Duramax Diesel. Working on rusted brake lines is never fun. Having a new set up pre-bent brake lines on hand before you start is the way to go. I used an oscillating blade to cut the old lines off flush with the tube nuts so a socket can be used to un-thread from the ABS Pump and Brake hoses. Started by installing the rear lines firsts. The "T" on the rear end housing doesn't line up with the mounting bracket on the rear end housing. Within half an inch but not able to get the bolt into the mounting tab. Not a huge deal and I'll tweak or fabricate a new bracket once the weather warms up. RH Front line I installed next as it was the longest and most difficult to fish through the maze of wires, brackets and routing under the radiator and up over the RH Frame rail. At the ABS Pump I worked from frame rail towards transmission, top to bottom and had good access for hand wrench to tighten everything. I installed new stainless flex lines at this time also. Russel 695770 which fit well. Lines all had to be tweaked a bit as they come folded or rolled in strategic locations to allow manageable packing size. Use caution when straightening out these bends, go a little at a time and try to make the line straight as possible. I hope using stainless lines to never have to redo this work again!

Replace rusty steel brake lines with Dorman stainless steel lines

This was a tough job, but having these prebent lines made it easier. Passenger front was the toughest line forsure. The rear line through the frame rail was tough aswell. Lines arent an exact match, but you can bend em around yourself after you have the lines in place. I was able to get the lines in the stock plastic frame holders and everything. 10/10 would recommend. The stainless lines do feel a bit different in the pedal. Overall great product. Price has gone up a bit it seems over the years $180 i payed but it was worth it and fast shipping aswell. Was delivered to my door within a week

Fit was really good and installation went easier than anticipated. End caps to aid in install so the ends don’t damaged or dirty would have been a nice addition. Electrical tape fixed that issue, however. Great product!

This job is a real pain. And I'm saying that as a guy who already removed the hood, fenders and bed. The passenger front line should be two pieces. Otherwise the kit is close enough. The hardest part for me was getting the lines on the ABS module in the right order. 2006 Duramax.

Got run around from Dorman AND Amazon; Amazon wants me to put in return but they were told parts already on our truck except missing part. Amazon still saying to put in for return, but this option not available via Amazon return policy. Disappointed that despite concise explanation, doesn't seem to be enough for item to be shipped from Amazon or Dorman. Will likely not order truck parts like this again from Amazon.