TP-Link Deco XE75 AXE5400 Tri-Band WiFi 6E System - Wi-Fi up to 7200 Sq.Ft, Engadget Rated Best for Most People, Replaces WiFi Router and Extender, AI-Driven New 6GHz Band, 3-Pack

This TP-Link Deco XE75 3-pack basically fixed every dead zone in my house. I've got a two-story place with a detached garage and I used to lose signal constantly in the back bedroom — now it's solid everywhere, garage included. Setup was stupid easy, took maybe 15 minutes through the app, and it walks you through placement for each unit. The new 6GHz band is noticeably faster for stuff close to the router, and having tri-band means my smart home devices aren't fighting my laptop for bandwidth anymore. Only real gripe is the price — this isn't a cheap upgrade. Also if you don't have a lot of WiFi 6E devices yet, you might not notice a huge speed boost right away, but the coverage alone is worth it. No more random dead spots, no more yelling "is the wifi down again?" from the other room. Would recommend if you've got a bigger house or just want to future-proof your setup.

I've been having terrible issues with my google nest mesh wifi system. Very slow download speeds and incredibly poor upload. Kept checking modem directly and realized all was well there. Finally broke down and decided to give these a try. We have a large 1 level home spread out across 5000 sq ft so coverage from one wifi router would never worked. I was using 5 google nest mesh routers and getting pretty poor speeds. Coverage was there with strong wifi but I'm guessing the mesh network was a problem. If I was near the main router puck, speeds were reasonable. Soooo...broke down and finally decided to give these a try. Honestly went with these because of the price. Happy to say they've not only completely turned around my wifi speeds but now cover the entire house with just the 3 devices. Setup was a lot easier than I expected as well. Completely satisified with them and think for the money, incredible value. I didn't even know my tablets had wifi 6 on them until I turned these on :) If you've got coverage and speed issues....give em a try for sure.

This mesh system is worth every single dollar. Setup via the app was incredibly straightforward, and it seamlessly blanked a massive footprint with lightning-fast, stable internet. The dedicated 6GHz band handles heavy streaming and gaming flawlessly without any drop-offs. If you are tired of weak router signals, this is the ultimate fix.

I’ve now had these for four months and am so happy with my purchase that I find myself writing a review. I was looking to upgrade from my google nest WiFi (purchased in 2022) as I was having issues when my wife and I worked from home simultaneously while both constantly on video. Our house is taller than it is wide, and we need four stories of WiFi coverage as we both work in the finished attic. I was set on upgrading to 6E with the addition of the third 6ghz band, which I can specify for connection for both our work computers. Setup is a breeze, maybe took me 15 minutes. I’ve enjoyed the deco app and, since I hardwired my points together, it honestly discovered each device on its own without any fuss. We pay for 1G speeds and with Google nest we never could get north of ~300gb, and typically sat at 80-150gb. The deco immediately was surpassing 500GB without hardwiring them in. Once I connect them via Ethernet we were getting speeds of 900+ consistently, across the whole house. Call me crazy but when I pay for 1000GB, I’d like to get my moneys worth. There are many features of the Deco app I like- but I LOVE that I can have both a separate IoT network and a guest network with the click of a button. You can easily see what points have what devices connected to them. You can also reboot your system, check for updates, and optimize your network. The only issue I’ve had with the app is my weekly reports never pull thru, which is a minor issue. Maybe my favorite part of this system is that it is reverse compatible! I got a 3 pack of these 6Es and they are great for heavy use in my house; but I have a shed 80 feet from my house that I trenched an Ethernet too. Point being, I wanted to have some smart plugs/iot devices in my shed but didn’t want to have to buy a single 6e device, so I simply got a used X55 point and they all work together seamlessly! Google doesn’t have reverse compatibility so this was a big selling point for me. Even my X55 puts up 800GB plus! Since our household setup is four floors, the final feature that made this a no brainer for me was having the 3 Ethernet points in each device. My modem is in my basement and to optimize my network, my other two points need to be in my attic, and my garage. Having 3 ports allows my basement device to receive from the modem, have one output to the attic, and one head the other direction to my garage. This saved me a ton of hassle of having to wire from my attic, back down to the garage. Lots of flexibility with your setup having that 3rd port. This is what sold me on TP Link over Eero. I would highly recommend these to anyone looking to upgrade or get into a mesh network. If you are paying for speeds and not realizing them, I’d give these a shot. The reverse compatibility, 3 ports flexibility, and app functionality have blown me away.

I am an network engineer with 30+ years of experience - way longer than WiFi has been around. I have designed and implemented many business WiFi systems that support seamless roaming over larger areas so when I say that this system is a pathetic implementation of meshed WiFi and roaming I do have experience to back it up. I bought this system because I wanted to upgrade my home's WiFi system with a 6GHz WiFi 6e capability and I was sorely disappointed in this system's meshing and roaming capability. I performed extensive testing with demanding applications on modern Android phones, Apple iPads, Samsung tablets and laptops. The bottom line - this system is an abysmal failure for supporting roaming in a meshed WiFi network. This system's ability to allow devices to roam between access points is pathetic to non-existent. You might as well have 3 independent WiFi access points in your home. In spite of everything you read about this system it is technically inferior because it relies on using the exact same WiFi frequencies on all units when they are meshed! This pretty much kills the ability for devices to smoothly roam between the APs without dropping, re-scanning and re-connecting. The reviews for WiFi access points generally only emphasize performance - how fast you can download and upload and how much the signal degrades based on distance to the AP. That is fine for a single AP however, any system like this one that is supposedly offering a fully meshed solution it is an inadequate measure of performance and completely leaves out test results for the main reason to consider a meshed system in the first place. In fact, I have yet to read a single review that addresses a consumer grade system's meshing/roaming capabilities and performance. This system like almost all of the 'consumer' grade systems do not set the WiFi frequencies independently for each AP. This system chooses the exact same WiFi channels for 2.4GHz, 5GHz and 6GHz for each node. This makes it all but impossible for devices to smoothly roam between AP's. Why you may ask? Because the device has a difficult time distinguishing between a signal that is fading from a more distant AP and the stronger signal of the next AP (that it has yet to connect to) effectively causing the device to stay connected to the distant AP until it is overwhelmed by the interference of the stronger signal from the the same WiFi frequency on the closer AP next to the device. Eventually the device just drops the connection to the distant AP and goes through a 'scan and connect' to the closer AP with the stronger signal. This will always interrupt VoIP (WiFi) calls and other latency sensitive applications such as gaming and trading apps. This system purports to offer 'Fast Roaming' (802.11r) but it is totally ineffective. Next there is the issue of frequency management. A good system will only use 2.4GHz bands with client devices as a last resort. Either because the client device can only connect on 2.4GHz channels (many IoT devices only work on 2.4GHz channels) or because a device has gone beyond the useful range of a 5GHz channel. 5GHz channels are a much lower power level and don't penetrate walls very well. 2.4GHz channels offer better penetration through walls and floors. A well designed and implemented WiFi AP will 'encourage' devices to connect on 5GHz channels because 5GHz offers much better performance than 2.4GHz. This system does not do this AT ALL!! In fact it will mostly connect at 2.4GHz - especially once a device moves far enough away to make 5GHz to weak. From that point on - even when switching (I can't call it roaming because it is a drop, scan and re-connect) to the next AP it will tend to remain on 2.4GHz channels. Only devices that stay relatively still, close to an AP and rarely move to another AP will utilize 5GHz channels and even then for no reason the device may switch from 5GHz to 2.4GHz even if it doesn't change position and has a strong 5GHz signal. This could be caused by nearby interference (your neighbor's WiFi). Please don't confuse this with the selectable option that causes the AP to only use 5GHz channels - an option that is disruptive to most devices and can actually make roaming and the overall WiFi experience worse by depriving devices the ability to use 2.4GHz channels when 5GHz channels would be ineffective. The absolute worst aspect of this system (and most other 'consumer' meshed WiFi systems) is that it used the exact same 2.4GHz, 5GHz and 6GHz channels for each node making it impossible to mitigate any external WiFi interference near each node (mostly your neighbor's and outside WiFi systems) since each node is bound to be exposed to different WiFi frequency interference. There are so few WiFi channels available that this means at some locations you will have good WiFi performance with the nearest AP and at other locations performance will be poor due to local interference newar that AP. The bottom line don't buy this if you are looking for smooth and seamless roaming between APs. The high cost of this system just means you are throwing more money away - not getting a good solution. In case you are wondering - I returned mine.

I have a 3 unit mesh. I'm getting 700Mbps consistently on my PC 30 feet from the nearest router through 2 walls, which is pretty amazing. Setup is a snap, EXCEPT you have to use a TP-Link app on your phone and set up a TP-Link account. Didn't fiddle around to see if that can be bypassed. Aside from that, configure the primary, then adding another node consists of turning it on. Yes, that's it. The system has been stable, it's just working. So why only 4 stars? The user interface is horrible. The web-based one is essentially useless. The phone-based one gives you some better control, but various features are not at all obvious, such as how to pin a particular device to a specific router (you can, once you manage to discover the magic place to do it). You have no control at all over channel assignments or other settings I've always been used to having with a wrt-based router like the ASUS ones. Setting up separate 2.5G and 5G SSIDs is fairly straightforward, but again not well explained, do you use the 'IOT' or the 'Guest' SSIDs? Turns out either, but you have to discover the setting that lets the guest network access your local net if you want to use that. Pick the IOT one for 2.5, turn off the 5G radio on it, turn off the 2.5G radio on the primary SSD. Standard practice, but again the horrible UI makes it a bit of a hunt. I moved to this because my ASUS RT-AX86U and RT-AX56U mesh would just stop working on 2.5G fairly frequently, requiring a reboot. But, the ASUS never came close to the speeds I'm getting now. Conclusion - if you just want plug-and-play and don't want much configurability, this is a great mesh system. So far. BTW, be sure the wifi in your device can actually support the data rate, don't blame the router when it's the wifi in a device that's the culprit. Update after about 4 moths, loving these. Far more reliable than the ASUS mesh I had before. They just work, period. UI is still lame, though.

We have an AT&T gateway and have been using three older TP-Link routers as access points connected by ethernet using our home's structured wiring and a TP-Link repeater to boost the signal to our two Ring doorbells. I'm embarrassed to say but we only have 50mb/sec internet because nothing faster is available where we live, even though communities right next to us have had fiber for years. That said, the speed we have actually works just fine for everything we do, which is quite a lot. We do streaming for all our TV watching, work from home, have many Ring cameras and doorbells, and lots of other devices. The problem was that our wi-fi seemed to get bogged down and wasn't able to even deliver the 50mb/sec speed we have. This was especially problematic for our two Ring Doorbell Pros, where the video quality really suffered. Everything was blocky and blurry, I'm assuming because the cameras weren't getting enough speed and/or strong enough connection. The construction of our house likely doesn't help since the front is brick and stone. With this new Deco system, everything works and works well. We have a 3-story house, and I placed one unit on each floor. The first and third floor units are wired and the second floor unit is wireless, connected to the third floor unit above it. This configuration allowed me to place the second floor unit closer to the front of the house where the two Ring doorbells are, without the need for an extender. The system was very easy to set up and the app is great. It is easy to navigate, and settings are straightforward and easy to change. It provides lots of information on status, connected clients, signal strength, speed, etc. It's not as 'advanced' as the typical web-based router configuration interfaces but seems to have everything I needed. I have these in access point mode also, since my gateway acts as a router. I may see if I can change that at some point, but everything works flawlessly, so I may not mess with it. The great part is that I now have full wi-fi speed everywhere in the house and everything loads much faster. Live feeds on the Ring doorbells take less than a second to start and video is crisp and clear. I'm also getting excellent signal strength readings from all our outdoor cameras and doorbells, with readings in the -40s. Streaming starts faster on every TV, and we haven't had a single issue since we started using this system. Also, you can customize settings for every connected device, like which Deco you prefer it connect to and if you want to restrict it to a certain band (both default to 'Auto'). This is useful in certain cases, like for our two Ring doorbells, I set them both to preferred connection to the second floor Deco because it's the closest one. That way if it gets unplugged or there's a power outage, this will ensure it always connects to the closest one. I left most everything else on Auto and that seems to work fine, and it seems to select the best (closest) Deco. I've also had no issues with 5Ghz devices connecting to the 2.4Ghz band. Our phones have 6Ghz capability, so I specifically connected them to that network, since it has a different SSID. Signal strength and speed on that network is also excellent everywhere. I made both the main and guest network SSIDs and passwords the same as our old system. Most 2.4Ghz clients connected to the new system automatically. Any clients we had on the 5Ghz band had to be reconnected because our old system had those networks separate. That wasn't a big deal, and this new setup is simpler to work with, having both 2.4Ghz and 5Ghz combined. The guest mode works great. We use that network for my wife's home-based business for her clients to connect to because it isolates connected clients from our main network and devices. You can easily turn it on and off in the app as well. I couldn't be happier, especially given how affordable this system was. I know you can spend a lot more, but wow this one is awesome and a great price. When I bought it, the price was $269 for new, but Amazon also had one from 'Amazon Resale' in 'Like New' condition for $219, which I bought. It all works fine, but when I received the product, it had a sticker on the box stating that it was 'Refurbished', which was no disclosed in the listing, which stated it looks and works like new and included ALL original accessories and contents, noting minor damage to the product box. What I received did not include any instructions or manuals and included a slip that said these could be obtained on-line and were not included with refurbished products. It also stated that it had a 90-day warranty but the original warranty that would come with a new product did not apply. While I'm thrilled with the product and it does work, I feel this was a bait and switch situation on Amazon's part. I highly recommend this system.

Upgrading from EERO to the Deco system has been a night-and-day difference. These two really aren’t even in the same league. The Deco performs exceptionally well, especially in multi-level homes where consistent coverage can be challenging. The speeds are exactly as advertised, and the setup process was incredibly simple and user-friendly. Everything just works smoothly right out of the box. I highly recommend the Deco to anyone looking for reliable, fast, whole-home Wi-Fi—it's been a fantastic upgrade.

ممتاز وقوه وسرعه

راوتر جميل ، اعطاني انتشار كويس وتغطية جيدة ، اذا فيه ملاحظة بعض الجوالات ما يتنقل بسهوله بين قطع الراوتر عند الذهاب من غرفة الى اخرى ، لا اعرف السبب هل من الراوتر او الجوالات ، اضافة ان الحماية المتطورة اصبحت باشتراك ؟

Definitivamente marca un antes y un después!! Mi conexión a internet es mucho más estable y de mejor alcance, puedes ver películas, ver televisión por internet sin interrupciones, obviamente depende de que plan de internet tengas contratado pero definitivamente ayuda a mejorar la velocidad. Generalmente tomo videollamadas por trabajo y antes al moverme entre habitaciones perdía la conexión, ahora puedo moverme por toda la casa y nunca me desconecto!! Una maravilla!! Su configuración es mucho más sencilla de lo que imaginas!!

Full hous coverage ,internet package full speed,good price.

اقل من ٦ شهور تعطل الجهاز وامازون مايضمن الجهاز ومكتوب بالوصف ضمان سنه للأسف امازون السعوديه خدمات سيئه