iSANMATE PLA+ 3D Printer Filament, Pla Filament 1.75mm Rainbow PLA, Color Change Filament Dimensional Accuracy +/- 0.03 mm,1 KG Spool

works very well in my Bambu A1 printer i have not had any clogs with this and it lays down very nicely and is good value for the price print quality is good

Nice flesh tone. No clogs. Smooth extrusion. Highly recommended for 3D Makers!

I was about to give this a great review, until I hit the tangles. This filament is not tangle free. I think I will rather look at something else in future.

For as cheap as it was, it did have noticible issues with printing. However a slight tweak in settings was required. It took a 0.6 nozzle woth 0.2mm layer height, it is prone to clpgging otherwise. I set the extrusion temperature at 230°C and it is golden. It's a beautiful filament when you pearn how to use it.

I'd been wanting to try wood filament for a while but hesitant to switch nozzle sizes. Found a good deal on the iSanmate wood filaments so thought I'd give it a go. No regrets. And now I like the speed of 0.6 nozzles too. I started with the Baby Groot planter model at 100% in the darker wood. Looked great but too dark for Groot. No problem, I also got the lighter wood. Wife saw it and wanted it as large as I could make it. The dark model is at 100% and the light at 250%. I've printed 3 large so far (~ 9 hrs each) and had no problems with the filament clogging (0.6 mm nozzle). I did have one adhesion problem but in retrospective I should have noticed the skirt lines didn't quite mush together. I'm getting stringing, but I'm printing at 2x normal speed for Ender 3 and haven't tweaked retraction much since the change. I'm sure it can be reduced. My first order included 2 spools (one light, one dark) and 1 spool came damaged. The filament was fine but the spool was cracked in multiple places. No way it would spin on my rollers. I contacted iSanmate and they took care of it very quickly with no questions. I've got more ideas for this filament, so definitely buying more.

This rainbow filament isn’t just PLA+—it’s PLA+++. I’ve bought this rainbow spool more times than I can count because every dragon I print emerges like it just flew out of a fantasy novel with a flawless ombré glow-up. Layer lines? Don’t know her. Warping? Never met him. These prints survive kids, time, and epic dragon battles—and still look showroom fresh years later. If unicorns had a 3D printer, this is the filament they’d use.

Very nice filament. The rainbow effect is beautiful and very vibrant. Prints turn out sturdy and smooth. I’ve already printed several little boxes with it and they show all the colors and feel like they’re going to last a long time. There has been zero issues with tangling. Great quality for the price.

I've used a lot of PLA and this has to be bar far the worst. When I got the roll, it nicely vacuum packed. I get it all set up on my Qidi X-Max II. It extrudes fine, I usually purge a bit more than normal to make sure it's ready to go before the first print. I set the perimeters to the temps this brand recommends and started the first print. I always watch the first few layers to make sure everything looks ok before I leave and let the Printer do its thing. Everything looked good. I come back about an hour later and the Printer is still going but no Filament is coming out. I stop the print and take apart the Extruder thinking it was just a jam. Everything apart, I see that the jam had literally broken the Heat Sink in half from either pushing or a moisture pocket exploded inside it. I have pics to follow up with that. I tried using the High Temp Extruder that comes with the M-Max II and while it did print a couple things, they looked awful! It jammed frequently as well. Thinking it was the Printer, I took the Filament over to my Ender 3 Neo. Got everything set up and was able to get another couple of prints that looked like dog ****. It clogged on the Neo as well several times. I tried using temps from 190-230. Tried with the fan off and then up at frequencies of 25%. Nothing changed. I'm going to return it because this is seriously just unacceptable. I should have Isanmate reimburse me for the broken Heat Sink but I doubt they will. Don't buy this Filament. Don't buy this brand. You might regret it like I do.

Had a problem with the filament being a bit wet, had to run it through a dryer multiple times, still not perfect

El color es bueno, pero al momento de embobinar creo que no tuvieron la suficiente precaución de hacerlo bien ya que al parecer viene todo amarrado, espero no tener problemas para imprimir y no tener que estar cuidando todo el tiempo que se vaya a romper Edit: 10 meses después y casi 30 kilos después pedidos es un excelente material super confiable y funciona muy bien, me siguen llegando a veces mal embobinados pero no se atoran ni se rompen

Love this color and how it looks, ended up getting other transparent colors from isanmate

EXCELENTE CALIDAD DEL FILAENTO, SALEN HERMOSAS LAS LAMPARAS IMPRESAS, BUENA TEXTURA BUEN COLOR, SIN DATOS DE HUMEDAD.

Come da descrizione ottimo prodotto