iSANMATE 3D Printer Filament Bundle - Pla Filament with Wood, Pine, Sandal, Yellow Pear, and Ebony - 1.75mm, 250g x 4 Pack (20 Wood Powder 80 PLA).

Great colors and strong, this PLA is easy to print using common PLA settings, 208 C at 100mm/sec using a 0.6mm nozzle.I have a homemade delta, so I was pleasantly surprised by this filament, being a more successful blend of wood flour and PLA. It has a nice woody smell and should not burn, as long as speed and temp are well balanced. It adheres to the printbed easily and rarely fails to perform.Ive been using it to develop a spring driven bolt bow for small projectiles. So far, problems have been with the design, not the filament.

Probably the driest filament I have received in the last couple of monthsAs a result the filament is very pliable. Good plate adhesion and nice printing.

Very good quality and print looks just as it should

This isn't your normal PLA. Not even close. Testing is a must. Temp tower had stringing from 190c to 220c. Had no adhesion on magnetic plate until 200c, and plate was at 60c. When it sticks, it really sticks too. I could only remove the build while the plate was hot. Got a clog mid-print also...luckily it was a short print at only 3 hours and I was there to catch it.Drying didn't help.The one positive is that it does hide print lines very well. No zits or bumps, but there was a ton of stringing that had to be removed.I'll keep testing, hoping to find that magic combo of temp and retraction. But for now, I don't trust this filament.Update: Seller has reached out to assist with my issue. I am hoping that I may have just received a bad batch. It happens. I will update when i hear back. It's good to know that they are listening, that gets a thumbs up from me. Stay tuned :)Update 2: Well, they left me hanging. 5 days with no communication. Lots of pictures were provided, with lots of stringing and bad adhesion on test temp towers and wagon wheels. Of the 2 rolls I used, I found the best prints were at 180c, high retraction, 90% flow rate, 50c bed. But they still produced less than acceptable results.Conclusion: So, I really wished this worked. I like the look of wood prints, but this filament just has too many issues...from clogging, stringing, adhesion, etc. I do see some of the other reviewers saying it worked for them, so my thinking is that I just got a bad batch. To be fair, buyer beware, and I hope you have better luck that I did.

Intried differents setting, but about 80% the time the adherence is really hard yo get, and it clogged the nozzle. I never experienced that king of problem with the other filaments brand I owned. Frustrating