ASOKO 14.5" Under Cabinet Lighting Dimmable 3 Colors

I actually really LOVE this little light, it's EXACTLY the kind of thing I was looking for. I needed a little bar light to go underneath the cabinets above my monitors, something unobtrusive, and this really fits the bill. The fact that it is removable and portable is a nice little feature, though I doubt I'll use that feature for my current needs. The three different light colors/warmths, AND the fact that it is dimmable to a great extent are PERFECT for my needs. I needed light directly on my workspace and in front of my monitors, bright enough to light my desk specifically in an otherwise light room, but I also occasionally like to work at night, and don't like to advertise the fact that I'm here, and this little light is perfect to light my workspace without shedding a lot of light elsewhere. I can now work in the dark, yet still see what I'm doing, and dim the light to whatever level I need. The switch being about a third of the way down the cord is also perfect. I've attached it to the sidewall of my desk with the included clip (used the other one to clip the cord out of the way down the outside of the desk). I appreciate that it is NOT on the light bar itself - it's out of the way, but within reach, and I'm not constantly fiddling with the light bar, potentially causing problems with its placement or attachments. The cord is the perfect length for the light bar to be centered over my workspace, and the cord to drape behind the monitors, down the side of the desk, and wrap around to the front of my computer tower to plug into a USB port. (If I wanted to use the included wall plug, it might have *just* been long enough - but I might also have wanted an extension cord of sorts.) The two different styles of magnetic 'clips' are a great idea - you can use and place it in a variety of angles or configurations quite easily. I only needed the L-clips, but if I were using it strictly on a flat surface, the discs could be useful. The one caveat is that, yeah, the 3M adhesive foam bits are pretty crap. The first one, when I pulled off the backing, the actual sticky part came with it - so it was clear that piece was going to fail. The other one failed an hour later as well, and that was after leaving the adhesive to adhere without the weight of the bar for that hour. (And the bar itself is quite lightweight.) So - find yourself a different, better adhesive, and you'll be set. Probably either some genuine 3M Command strips, or those Command 'plastic velcro' bits, if you want something that's easily stickable/removable. I simply used a couple of strips of heavyweight Scotch "book tape" that I had laying around and I know to be very sticky to strap the L-clips to the backside of the cabinet edge - it's functional, and can't be seen. One more thing - it wasn't immediately obvious to me where the actual 'magnets' are in the strip. They are located ONLY at the ENDS of the light bar. Attach the magnets, THEN whatever you're using to stick the metal pieces to your location, and either mark the ends, or position the whole thing in place.

Really nice under the cabinet light easy to install inexpensive what else do you want?

ultimately, the product itself is pretty solid and a good option for lighting if you don’t have a lot of space. most of my complaints boil down to how the light adheres to surfaces. I think for the price point it’s probably one of the better products you will get. It is both good ambient, light and functional light. PROS: -Brightness -Multiple colour settings (warm, cold, both) -Magnetic CONS: -The adhesive is kind of weird (somehow very sticky and not sticky) -Cord clips are not great -When the light powered off the switch glows a little red -you can’t hold down the dimming function RECOMMENDATIONS: -if you have the capability just install magnets and don’t use the provided adhesive. -use the command cord clips, not the ones provided -Adhere the switch with Velcro or magnet -use some sort of tape to keep the cord from sagging

The subject line is accurate. The light has 3 different hues and multiple levels of brightness. At its peak, it works well under the cabinets of my new cubicle, as the light that was provided to me at work was way too powerful for being 6" from my face. This light works great for my application. Metal cabinets didn't need the adhesive pads and half elbows so spare parts! The power source came with it but the USB-A plug works plugged into my All-In-One PC just fine and with no issues. The wired controler tucks nicely under my cabinet and is easily the skinniest control I've ever seen in a light bar of any sort. The light bar itself is really narrow, which is great if you have anything sticking out that coukd make a wider and/or longer light bar more difficult to fit. However, one issue is if you use your nail to push the buttons on the control panel, the buttons themselves will indent quite easily as they are a bit soft to the touch. Otherwise, the light exceeded my expectations, but I do wish they were linkable (2 or 3 units) as that would make this a slam dunk product for sure!

My wife needed a bright light for her pull-out shelf keyboard. With adjustable brightness and warmth and an on-off switch instead of motion detection, at a reasonable price, this seemed like the right product. . . and it was. The distances between the lamp and the switch and the switch and the power source were perfect. The switch includes buttons for warmth color and brightness and a larger on-off switch. I and my wife particularly like that once you make the settings they remain the same for the on-off switch -- no cycling through a single button to get to your desired setting each time. This is a sign of good engineering and good quality. After I installed my wife's light I purchased and installed one for myself. Ditto review for that one. I can't say whether or not the two sided stick-ons were adequate since I used 3-M mounting squares trimmed to cover the entire back of each lamp and switch in a bit of overkill. The point being, don't throw a one-star review if the stick-ons provided don't secure the light to your satisfaction, when 3M makes 2-sided tape and mounting squares that will well-solve that little problem. Just use isopropyl alcohol to pre-clean all surfaces. We are both happy with this light.

Pros: What we like most about these lights are the various functions such as three color temperatures and easy dimming. When you hold the + or - button to dim, it slowly dims incrementally or you can simply click the dimmer button and it will increase or decrease illumination by one. This is an added detail we like. We use the 4000k setting as it isn't yellow, just a nice warm white. The 6000K is very bright white and at times what we need. VERY important: These lights work with Google Home. Metal fasteners allow you to hang the lights in four directions we went with down, but aiming them at the back wall is an option. Will buy these again for other areas. Cons: The only problem we had was the included double sided tape. It was difficult to peel off and at first only one side was sticky, we fussed for a bit to make sure we were not pulling off the sticky layer, but even after this the tape was not strong enough to hold light and it fell . We simply used our own double sided tape and it works perfectly. I wish more than one of these lights could be connected because we have a long area under another set of cabinets, but we went with another product by ASOKO and like them alot: see link below. https://www.amazon.com/ASOKO-Dimmable-Lighting-Magnetic-Version-3/dp/B07CVCF8JF/ref=rp_c_2_5?pd_rd_w=gqEiv&pf_rd_p=45ea3989-28e2-45c9-97ac-7e99f613a91b&pf_rd_r=XSNR3KY465JNDY60QEJ7&pd_rd_r=65fa18c7-9080-440e-8ef0-46720998e672&pd_rd_wg=hA8HZ&pd_rd_i=B07CVCF8JF&psc=1

I liked this light and the ease of using it and installing it, but I just bought a new one because the one I had started flickering and I thought maybe it was just getting old. I got my new one yesterday and started using it this morning and lo and behold, the new one started flickering, as well. Overall it’s a good light, but the random flickering with no way to stop it is very aggravating and headache causing, so I couldn’t give it 5 stars.

Just plug it in and turn it on. Works great. Love the option of 3 color choices and dimmer.

Great over the sink light. Does as described. 2 light modes warm and cool also dimmable. Easy access controls. The plug-in cable is long and small so easy to hide. Mounting is easy and the tape provided is good quality. Again I do recommend.

Love this! Works great, 2 different light setting and control bright or low lighting makes for great working conditions. Used it for desk lighting and also for behind the TV lighting.

I ordered two, one worked for about 2 minutes before it bit the dust. the other works just fine. The brightness is definitely good. the cord is fairly long, i have extra to spare. several brightness settings which is nice. They are smaller that you might think based on the photos but they provide pretty decent lighting. The seller reached out to me almost immediately (I just didnt see the msg) and has sent a replacement. Super friendly and easy. It is a great little light.

Easy to install. The provided clips keep the wire tidy and not dangling. Good for those under-illuminated areas that don’t have enough space for a regular light fixture.

Feb 23, 2023 Review for ASOKO LED Under Cabinet Lighting USB Plug-in, Dimmable, 3 Color Changing Use three days. Has built in magnets at each end of the narrow light bar. Used two screws and washers under cabinet, light bar sticks to the washers. Several brightness levels - v. good. Three colour temperature settings, achieved by using two sets of LEDs (white and amber). Colour levels are a) white only, b) white + amber, c) amber only. Has USB cable with plug-in to wall. Reasonable design. Not yet tested long term.