Cheetah APTMM2B TV Wall Mount for 20-80Inch TVs,VESA 600 and 165lbs, and fits 23.6Inch And 15.7Inch, includes a Tilt TV Bracket, a 10ft Twisted Veins HDMI Cable, 6Inch 3-Axis Magnetic Bubble Level

I've never wall mounted a T.V before, but my friend recommended this bracket to mount my 50 inch Bravia. It pretty much comes with everything you need, I had to buy some specific fixings for plaster board. (I used "grip it" fixings, which were fairly good) The bracket seems very good quality and overall does an excellent job. Once fitted, the T.V is easy to take off the bracket if needed. My only slight criticism is this: the mounts that attach to the T.V itself, do not seem to sit perfectly level when screwed in at the top holes of each mount. The T.V did not sit level despite both mount holes being in exactly the same position on each mount. I checked the wall mount with a spirit level and this was perfectly level. I did the same with the back of the T.V and it was definitely off. Thankfully, due to the design of the bracket, it was fairly easy to just adjust the mounts on the T.V and offset them very slightly to get it level. Not a massive problem, but slightly annoying. Edit: I recently received an email from SPN imports, the company who supplied me with the bracket. They wrote to me regarding my feedback in having difficultly getting the TV mount level. They apologised, gave me a full refund and sent me a free gift of an articulating TV wall mount! They did all this despite me not having even contacting them to complain or anything. I think they had just seen my comments in my review. It was only a minor inconvenience anyway, I easily mounted the TV correctly, as stated in my review. I'm absolutely astounded at this level of customer care and full praise must be given, especially considering that I bought the mount back in march and they had actually taken consideration to follow the matter up some months later. They seemed genuinely concerned. So, thank you very much SPN imports, you are truly excellent and I appreciate your care! (I've changed my rating of the product from 4 stars to 5, for the excellent customer care received)

Great mount, solid and was easy to fix to a stud partition wall, plus it comes with a good quality long HDMI cable. I did fit flat washers on the four screws that attach the two upright arms to the TV, as the spring washers did not fully span the gap and went slightly off centre, it may have held fine but I didn't want to take any chances. The quick release mechanism is very handy to quickly release the TV to gain access to the rear connectors, however, this can be either a plus or a negative because the TV is not fixed in place and can slide left and right with a bit of effort. In my situation this was a plus, as the 2 wall studs that I attached the frame to were not centre to where I wanted to position the TV so I could slide the TV across to centre it. The 2 release cords can easily be hidden from inquisitive hands behind the TV. The tilt mechanism seems to work and securely holds the TV at the correct angle, plus there are 2 locking pins supplied if you did want to have the TV fixed flat against the wall. In all a decent quality mount at a great price.

The wall mount arrived on time although I did find it placed on my door step in plain view of anybody who was looking for a free wall mount as they walked by.. Thankfully no one took it and I was soon on the way to putting the bracket together. The instructions were not easy to understand but once you Unpacked everything it started to make sense. For the price I think it is great value and does the job so far. I haven't and hope not to find my tv on the floor one morning. You can easily buy the equivalent from the high street for around £60-£80 so great price and also comes with hdmi cable and spirit level include. It's nice and slim against the wall which is what I wanted. Just a little tip- read the instructions across the page as apposed to down the page as it didn't make much sense until I realised this. UPDATED 18/4 I have increased the star rating to a full 5 stars. I have received amazing customer service from SPN imports and services who supplied the TVs wall mount. They called me in regards to my review and comments on how the instructions were a little tricky to understand. They asked for some feedback on how they could improve the instructions and improve the product which I was happy to give. They also reassured me in regards to the manufacturing strength of the wall mount. They then also felt the need to go above and beyond in making me a happy and satisfied customer by crediting my account for my inconvenience as well as sending me out an additional HDMI cable. I have never experienced customer service anywhere like this before and would highly recommend them.

bought this for a neighbour, I fitted and installed..... firstly, don't trust the spirit level, used two of mine to double check and both read as level, the freebie read out to the left, double checked with one of mine, freebie then read out to the right... bracket hadn't been moved.... anyway, arrived in a box with every component packed in separate plastic bags, a quick look at the instructions and a bit of common sense and it all went together like a small meccano set, you will need a crosshead screwdriver and a small socket to make life easier, (can't quite remember think it was 9 or 10mm)..... placed bracket on wall with my own level, marked holes and drilled, if using the wall plugs a 10mm drill is required... replace bracket and again, using a socket, bolted to the wall.... little hint, before fully tightening, check again with your level as you can get 1 or 2mm movement between the bolt and bracket, tighten and that's the hard bit done...... just remember when placing your bracket on the wall, your TV will extend above the top of the bracket by several inches depending on size of TV as to how many. mounting the TV to the hanging hooks couldn't have been easier, the bracket is supplied with various screws and spacers that will suit most TVs, they certainly fitted this LG, LG had also supplied 2 large thumbscrews that went between bracket and TV, so if you have these in your LG box and wondered what they are for.. now you know..... back to the fitting, as said, just found the correct sized screws and fitted easily onto the back of TV, the cheetah paw prints on cord towards the bottom... you ma find this easier to do if on a flat surface with the TV face down on a large towel or similar, so as not to damage the screen... you can now also add tilt to the bracket if required, simply loosen top screw on hooks slightly, adjust arm and re-titghten, also pull both cords to release the bottom locking mechanism.... if you have previously used the stand / legs on your TV, now is the time to remove those... now, you may require the help of a friend for the next part, depending on how confident you are, how long your arms are and of course the weight of your TV, lift the TV to the wall mount, hooking the top on first... your TV is now quite safe, step back, check it is centred how you want and you can move slightly left to right along the wall bracket (obviously keeping top hooks on the lip).... now to get the locking catches to actually catch, I found I had to lift the tv upwards just slightly to get them to do this, but you will hear a definite click when they lock in, just pulling gently outwards with the bottom of the TV will confirm this..... now affix the two adhesive magnets (supplied) to the dangly paw handles and put them behind tv onto bracket, not essential but tidies things up.... Forgot to mention before, unless all of your inputs are accessible from the side of the TV, you may want to connect these first, being a slim wall mount there is very little room to do this afterwards Overall pretty happy with the unit, this was used on a LG 39Inch, LED, I would be happy to put a bigger LED onto this bracket without worrying (maximum Vesa mount 600 x 400).... unsure whether I would trust it on a larger heavier Plasma, but that's just my own opinion, my old 46inch panasoninc is held with a bracket twice this size / thickness and held on with 8 thunderbolts, you spend a lot of money on some TVs, why risk taking chances for the sake of a few quid. overall, pretty happy with the mount, no doubt there are better mounts out there, but very unlikely within this price range (I paid under £15 inc Prime delivery)... suitable for large LEDs, and comes with a multitude of fittings, nice to see proper sturdy bolts instead of screws for wall fixing... the little velcro straps advertised in the picture were not supplied / missing, not an issue in this case as used a twirly cable tidy anyway.. as said previous, not sure I would trust this for a large plasma due to weight, but I am belt and braces when doing this sort of job (I paid full asking price for this mount, and this review is my own findings and opinions)

Simply a great monitor mount for smaller monitors ... I wanted a cheap mount to add an old 17" screen I had knocking about to my pc so I could have two screens running for coding. This mount was a pleasant surprise , its well built and easy to hang. The mount is supplied with 3 really good wall fixings and a spirit level as well as an HDMI lead !!!! The swivel mount has 3 tension springs on the ball joint which can be adjusted with a 10mm spanner.. what this means in that if you don't get the mount perfectly vertical on the wall you can still have the monitor perfectly level and also means you can adjust the tension to suit the weight of your monitor so it stays where to leave it. It is however very easy to hang and align so you'll not need to adjust it much.

Received the item, and first impressions were that it seems flimsy and I am doubtful of whether it would hold up my TV. When following the instructions to see if I had received everything in the box, it was not long before I noticed that all items were labelled incorrectly and did not correspond to the instruction (quite confusing). The item itself is different to that shown in the picture, where the connecting bracket does not have "Cheetah" written on the bottom one and the adjustable hanging hooks on both arms are black and plain metal and do not have a paw print on them. Also the connecting bars on the ends are not round and silver, they are in fact black and an "L" shape. Putting the item together also required the connectors (ones pre assembled) to be loosened so the screws could be put into the other end as they did not line up. This was quite annoying. I will be putting this mount up in a few days and will update with whether it is any good or not. UPDATE: I have put my 50 inch TV up using this bracket and I am happy to say it seems to be holding up well. Regardless of the minor issues I had initially, once the bracket is screwed to the wall properly it is fairly decent. As long as you know what you are doing you should have this installed in no time. I would recommend this product as it certainly does what it is designed to do. The company selling these mounts strives on 100% customer satisfaction, and I was contacted by them regarding my initial review. After our conversation I was offered a full refund or a replacement product identical to the one pictured. This was something I was not expecting. Excellent Customer Service, will definitely purchase from this company again. Saying that, true to my word I have also purchased their three tier floating shelves and have given this product and company 5 stars.

Having chosen this product after a little research and reading the reviews I am extremely to happy to say this is a really top quality wall mounting bracket. I could not be more satisfied, hence my rush to write a 5 star review. It is made of excellent quality materials and fittings. It fits together well and securely, the instructions are good, the finish of the product is top quality, with great attention to detail and even little Cheetah motives that just add to the appearance, (some detail that in fact you won't even see once fitted up with a TV on it!). Bolts are provided to screw into the wall, (I fitted to a stud wall but just as easy to fit into a solid wall). Bolts are provided to fit the TV holes, the brackets having a great deal of adjustment to fit various TV hole dimensions. My 48" Sony has VESA fittings and the brackets accommodated it with ease. It was easy to make up the bracket and with basic DIY I had the TV mounted on the bracket on the wall in about an hour. First class item, highly recommended.

This is the easiest way to mount a TV to a wall. It came with all the hardware for a variety of different implementations of the VESA standard, four different types of screws, different types of washers, spacers. The part which is bolted to the wall was very easy to put together, it came with very clear instructions telling you what size drill bit to use and very high quality bolts and wall plugs. Once you decide where you want to drill it, it comes with two different levels, one that clips to the mount itself and one that can sit on top, meaning it's very difficult for anyone not to mount their TV straight. The mount went up in a couple of minutes and then once the brackets go onto the back of the TV it simply hooks on at the top and clicks at the bottom, no screws to tighten. The brackets on the back of the TV have to pull strings with the manufacturers logos on which simply release the clips at the bottom and you lift the TV off to remove it. More than enough space to mount over a power and or AV socket in your wall. The gold standard in TV mounts.

UPDATE: I've increased the star rating of this product from 4/5 to 5/5 for the simple fact that SPN Performance (the seller of this product) has fantastic customer service. While my review was mostly positive (you can read it below, I have not changed it), I did note an issue with how tight the bolts came from the factory. SPN not only emailed me, but called me, to discuss the problem in depth and to let me know that they will be passing this information on to their manufacture to try and correct the problem in the future. The gentleman I spoke to from SPN was very professional and genuinely interested in the performance of his product. You cannot say that for many companies out there. Good on SPN for having great customer service. These mounts are pretty good, not great, but good. They will most certainly get the job done. What I really liked about them is how solid they feel. No flimsy parts. You will feel secure when you hang these. What I did not like is how difficult it was to get the monitor bracket off. They tightened the bolt way too tight. I needed to get a socket wrench and a piece of cloth for my hands (to prevent the allen wrench from digging in to my hand) in order to take it off. Also, the mount is not as flush against the wall as it could be. What I really liked about the mount is everything that it came with. Cheetah packed its box with more then they needed to. They include a level, HDMI cable, Velcro cable ties, and a little LED flash light. Lastly, if you cannot mount this in studs, make sure to get some real nice hollow wall anchors. The stuff included is really only for stud mounting.

Good wall mount for the money. Fairly easy to install, but issue was with the extension brackets. It took me a couple of minutes to get them lined up properly, but after that it was good. My worry is, with the extensions on, I wasn't sure if the the extensions could hold the weight of the TV with the lag screws off-set fairly severely; but, so far, so good. It seems solid enough and works well. The bonus HDMI cable is nice! Update: WOW! The customer service is AWESOME. Their response to my (I thought) fairly positive review has been overwhelming - so much so, that I've updated my rating from 4 to 5 stars. To date, the mount has held up VERY well, with absolutely no signs of the any part of the mount sagging, even with a lot of weight on the extension. Very sturdy and yes, I'd recommend this mount!

Easy to assemble. Easy to install (they even included a little carpenter's level - how cute!). Holds a 50+" Plasma TV (heavy) without flinching. Question: Why should I pay over $100 for any of the others? Answer: I "SHOULDN'T"!!! It even came with an included HDMI cable. This wasn't advertised though, so I don't know if everybody gets one (and I don't know how well it works, as I already had my own). My stud locations were in the worst possible orientation for placing the TV exactly where I wanted it. But all I needed to do was drill one extra hole in each of the horizontal rails and up she went. Very very good design (as an engineer, I love simple solutions). The maximum tilt range is perfect for my sitting distance - about 15 feet away from the TV mounted with its base about 4 and a half feet off the floor. Excellent piece. Highly recommended.

Great price, easy to install. some assembly required. Really do enjoy these cheetah mounts, they are solid on the wall and i don't have any worry. Bought 3 to install in a retail setting, and they fit the bill perfectly. Used for 3 55-inch Proscan 4k tvs

Había dos productos muy parecidos, de la misma marca pero distinto precio, son el modelo APTMLB y el APTMM2B. Compré los dos y he de decir que son muy parecidos, pero el primero tiene unos huecos de hasta 800x 400 y puede funcionar para TV's de hasta 75", y el segundo tiene unos huecos de más pequeños de hasta 684 x 400 y puede funcionar para TV de hasta 75" también, siempre y cuando su TV esté dentro del peso y tamaño sugerido. Ambos soportes de todas formas son bastante económicos si los comparamos con otros del mercado, y hacen su papel. Conviene tener en cuenta que son para teles grandes, y que si se quieren usar por ejemplo para una tele de 32 o de 40 pulgadas sólo hay que poner la mitad de las piezas. Luego viene con dos niveles de burbujas muy útiles y con un cable hdmi, alguien da más?