FLYCLE Roof Rack Cross Bars Compatible with 2019 2020 2021 2022 RAV4, CrossBars for Rooftop Cargo Luggage Kayak Bicycles Canoe with Roof Rails

I recently purchased the FLYCLE Roof Rack Crossbars for my 2024 Toyota RAV4 XLE, and I couldn't be happier with my decision. The installation was a breeze—just follow the instructions, and you'll have them mounted in no time. The aluminum construction feels incredibly sturdy, and it’s reassuring to know that it can support up to 165 lbs (75 kg) of cargo. One of my biggest concerns with roof racks is the potential for wind noise, but these crossbars have exceeded my expectations. They are designed to minimize noise, and I've barely noticed any difference while driving at highway speeds. This has made road trips a lot more enjoyable. The crossbars are a perfect fit for my RAV4 XLE and match the vehicle's sleek design. I appreciate that FLYCLE specifically notes which models they do and don’t fit—this made my purchasing decision a lot easier. I’ve used the crossbars with a rooftop cargo bag, and everything stayed secure throughout my trip. If you’re looking for a high-quality, durable, and quiet roof rack for your RAV4, I highly recommend the FLYCLE Roof Rack Crossbars!

When I purchased this Flycle rack, no review mentioned install on a RAV4 Prime... but data elsewhere suggested standard RAV4 2019-2024 RAV4s trims including the Prime (with exception of some select special trims ex. Woodland trim) used the same roof rack model. -> This Flycle Rack fit my '24 RAV4 Prime SE model just fine! I found everything needed for install "in the box" except a tool for removing the OEM "covers" on the roof rails where the rack mounts (I carefully used a screw driver to pry these out, but a plastic pry tool would be safest for the car finish). Install instructions could be more clear (Toyota OEM PT278-42192 instructions are more complete if you can find them, as the rack seems to install almost identically). Basically the product consisted of black finished aluminum cross bars, black metal-like support towers on the ends, w/ black plastic "tower covers" (which first snap in place... then "lock on" by turning a plastic "lock insert" w/ a special provided key). I first removed the plastic "tower covers" from the metal towers, then "loose installed" the cross bars on the metal towers using a supplied hex wrench, then sorted the gaskets for installing the cross bar assembly on the car. There are 4x plastic gaskets fitting the bottoms of the metal support towers (protecting finish of the roof of RAV4). I had to flatten and re-form these gaskets pre-install, as they were folded and creases had "set" during shipment (but they flattened out OK). Each metal tower bolts down to the "roof rails" embedded in the roof of the RAV4 with one M8 bolt using a supplied hex wrench. My Flycle instructions did not specify bolt torques... but Toyota specs suggested 12 Nm = ~19 pounds force on the end of the supplied 5.5" hex wrench in my Flycle package for this M8 bolt. Once the towers and cross bars were in place, I tightened the retaining screws holding the cross bars in place on the towers (I did this with everything mounted on the roof... a bit challenging... but doable if you are tall or have something to stand on to see what you are doing under the cross bars. Assessment post install (but pre-use) - Seem great cross bars... rigid and strong... look like they could be OEM models to me. If you'll mount them permanently, they seem fine as-installed out of the box. If you will take them on/off as as needed... (my norm), several mods may be useful. For storing the OEM plastic "roof rail covers" in the glovebox... (for re-install after rack removal)... I cut a small corrugated cardboard "storage sheet" with holes punched in it to accommodate the somewhat fragile "plastic clips" protruding from these rail covers (so they don't get broken in glovebox storage). Two parts on each tower also look at risk of getting lost during repeated install/removal: the plastic lock inserts can fall out once unlocked, and the plastic gaskets can likewise get separated/lost. I plan to carefully remove (without dropping!) and then storing the "lock inserts" in the glovebox w/ the other bits needed to install/remove the rack... lest they fall out unknowingly when storing the crossbars when not in use. I will either do the same with the gaskets... or I'll permanently double-stick tape the gaskets to the metal towers. I'll store all the small "install bits" in a quart zip-lock bag in the RAV4 glove box for use when needed. Happy w/ purchase thus far (at ~1/2 OEM rack "discount prices" I found...).

These seem like a good product. They are easy to install and don't add any noise when driving around. I would definitely recommend these over spending the extra money for the OEM ones.

Me gusta mucho como lucen en mi carro se ven muy bonitos la calidad muy buena ami me encantaron

Cross bars fit my 2024 RAV4 XLE. Quality not the best. Thankful extra plastic locks were included. I needed to use sealant for gaps in the fit.