VEVOR Deep Well Submersible Pump, 0.5HP/370W 115V/60Hz, 28GPM Flow 167 ft Head, with 33ft Electric Cord, 4 inch Stainless Steel Water Pumps for Industrial, Irrigation & Home Use, IP68 Waterproof Grade

Purchased this pump in the fall of 2024 after buying a major "fixer upper" house. The well had a lot of mud it in and even after cleaning professionally, still has a lot of sediment. This pump installed relatively easily (me and my wife installed) and has been working flawlessly for about 18+ months. That is with heavy use in a house with 2 adults, 3 kids and watering a garden, washing clothes, etc. I was so happy with the price I purchased a 2nd one to have as a backup. The pump I bought is a 220v. For the price, I could buy 3 for less than one of the more expensive brands.

Great septic pump that would buy it again. Reliable cycling,

Bought two of these. One for well pump to tank and the other for tank to house. I needed something for a solar powered system and the pump store didn't have the solar experience..so I was on my own. My well head is only ten feet and 60 deep, so I didn't need as much power as these, so I had to partially close off a flow valve to stop the PVC from pounding. I wanted the outlet plug originally for debug of the system, but am direct wiring them now that it works. My local plumber and hardware's store couldn't believe the low cost, and function..now they're both sourcing these. Very good for my project, glad I found them.

So far, so good! The pump looks nice -- all stainless steel. It feels well built. I've only had it installed about a month and have probably only used it less than 2 hours total. At 45 feet of head (the water level in the well is about 45 ft below the surface), pumping through 50 ft of 3/4 inch garden hose, it fills my 45-gallon sprayer in about 2.5 minutes. I don't understand how the power is computed. 370 watts should work out to about 3.2 amps. My ammeter says the pump draws about 9.5 amps (1090 watts). Indeed, a company representative answered a question and said it draws 8.9 amps. The performance graphs indicate a similar thing -- so this is not an error. I've been able to run this pump from a 2500-watt inverter powered by a 12V marine battery. The inverter struggles to start it, then says on the display that it is drawing 1430 watts. Again, the company rep said it can draw 35 amps on startup. My previous pump polluted my well by dumping oil into it. I cleaned the well according to instructions I found at two state government websites. All modern well pump motors SHOULD use non-toxic coolant/lubricant. Some use propylene glycol instead of oil. This motor clearly has fluid inside it: you can hear it sloshing. I asked what lubricant they used but never got an answer. Ultimately, I figured that for the price (1/8 the price of a pump from a local well supply contractor) I'd just deal with it. If it does leak oil, I'll just have to clean the well again.

Pump is at 100 ft. I hope also push the water about 40 ft up the hill to an IBC tote. It works great. I run it with me 3200 watt generator

Cuando llegue a mis manos le digo como esta el produrto es el unico paquete que tiene problema con la direlción no se que esta pasando .

Not a lot to say about this one. It's a well pump and is... pumping our well water. Quietly in the background. Pressure is good, flow is great. It was easy to install, and we now have a working well!

Pump works great! Used it for our irrigation system on our aerobic septic system easy to install, had to cut off the 110v plug but made a extension cord out of the rest of the leftover cord!