Mydome Light Switch Timer – Police Approved Retro Fit Timer Switch - A No Wiring Home Security Lighting & Burglar Deterrent

This is a fantastic gadget which is very easy to use. It works on a normal light switch and turns the switch on and off according to preset times by means of a small wheel/cog powered by standard AA batteries. It allows you to time a main light to turn on and off when you are out avoiding the need to plug in a lamp. A much better idea, especially if you have pets that could knock a lamp over. You can easily override the timer by pushing an on/off switch on the unit. It is installed simply by slipping a plastic cradle over a light switch and the placing the timer unit in the cradle with the cog wheel lined up with the switch. The unit can stay in place continuously or be removed if desired. It does make a whirring noise turning the switch on and off but it is only a second or so of noise. There are 9 separate programme opportunities over 7 days allowing almost any combinations of timings on different days. There is also a random function which turns the light on in the night at random times for about 3 minutes each time. This is useful if you are away as it mimics someone getting up in the middle of the night for a comfort break. I would suggest not using this feature if you are at home otherwise the noise might disturb you. The unit can be adjusted to move 1, 2 or 3 cogs at the same time depending on how many rocker switches are on the light control.

I have deliberately delayed my review as a previous revewier said theirs failed after 2 months. Well, 3months+ in mine is working perfectly and I'm really pleased with it. Yes, it's a little bulky but it was easy to install and set the timer - it comes with a spacer that I didn't need. I wanted to turn on 3 outside led bulbs at a set time and all of the digital electronic switches I found needed an earth and a resistor fitted. I just fitted this over the existing switch and, hey presto! Would recommend. Makes a slight whirring sound as roller moves over switch. Can be used with a single or double light switch. Would recommend.

The timer works well, and was easy to set-up and install. As it is a mechanical device, it will work with any type of light fitting, providing it has a "conventional" light switch. I had assumed that as this could be used with single/double/triple switches, it would be possible to program the different switches to operate at different times. However, although you don't have to operate all switches (by installing/removing the wheel mechanism that corresponds to each switch), all switches you've configured will operate together. The other reservation is that because this is a mechanical device, I suspect the life of the AA batteries will not last that long when it is in use, and when you change the batteries, you lose your programmed timers. A suggestion for the product inventor would be to include a small cell battery to keep the timer programmes stored, and just use the AA batteries for the mechanical movement. All that said, it operated the light switches perfectly, so it's a nice little timer to have in place to automatically switch on ceiling lights when you're not at home.

Great product. At first it seemed hard to set up. But after reading, I figured it out and its very easy to set up. I tested it to turn and off the lights with a 5 min. Time gap and it worked. Its pricey but its worth it!

Such a simple idea to tackle switching on and off your house lighting whilst your away on holiday or any length of time your not at home, without having to mess with any wiring. Just slacken off your room wall switch via the two screws and slide a bracket between the wall and the switch in the gap you have made, tighten back up and your done. Install two AA batteries into the timer, programme the timer and then just slide the timer into the bracket you have mounted behind the wall switch and that’s it. Note switch must be of the modern rocker type and must have a thickness to it, not the ultra modern flush fit, otherwise the timer on off mechanism will not reach the rocker. Please note ours was the correct type, but the timer still didn’t reach the rocker on our switch enough, so the manufacturer has put two extra spacers in with the switch for which you can use in conjunction with the bracket, which allows the switch to stick out from the wall a touch more so as the mechanism then reaches the rocker to allow it to switch it on and off it’s just trial and error to see which works correctly for you. It’s for the use on switches with either 1,2 or 3 rockers only, there are 3 activating wheels on the mechanism, you can remove any number of them from the sliding mechanism so the timer only trips the rocker you want it on and misses the others, Note it doesn’t switch the rockers alternatively for different times, it slides down and will trip all the switches at the same time, It’s up to you to remove the individual activating wheels and leave just the ones you need the timer to trip. Important point if you are using this timer whilst you are at home to switch certain lighting on and off in your home and it’s while you are asleep, IT WILL WAKE YOU UP the motor that moves the mechanism over the switch rocker is EXTREMELY NOISY. I noticed on a couple of reviews they mentioned the timer will lose its programming when replacing batteries, I tried this out and the timer we have stays programmed, so there shouldn’t be an issue, there is a reset hole on the front, if you need to change the main time ie to or from British summer time etc, use a straitened out paper clip for this and note there is no micro switch click when doing this so be careful you almost just have to touch the plate inside with very little pressure and you will see the time reset to 12.00. The on off programming you can alter without doing any of the above.

Works really well