Krud KutterMR32 The Must For Rust, 32-Ounce Trigger Spray
Thumbnail 1

Krud KutterMR32 The Must For Rust, 32-Ounce Trigger Spray

4.4/5
Product ID: 4926904
Secure Transaction

Details

  • Brand
    KRUD KUTTER
  • Color
    Colorless
  • Finish Type
    Gloss
  • Size
    12 Fl Oz (Pack
  • Item Volume
    946
  • Special Feature
    Non Toxic
⏱️Fast 1-hour dry time
⚙️Water-based rust dissolver
🛡️Protects metal up to 1 year

Description

🛠️ Rust? Removed, prevented, and forgotten!

  • PAINT READY FINISH - Leaves a smooth, gloss surface perfect for immediate topcoating
  • ECO CONSCIOUS SAFE - Non-toxic, water-based formula ideal for indoor and outdoor use
  • DUAL ACTION RUST SOLUTION - Removes and prevents rust in a single, effortless step
  • PRECISION SPRAY APPLICATION - Trigger spray design for quick touch-ups or deep soaks
  • LONG LASTING METAL PROTECTION - Keeps bare metal rust-free for up to 12 months

KRUD KUTTER MR32 is a powerful, water-based rust remover and inhibitor that penetrates metal surfaces to dissolve rust and oxidation. Its easy-to-use trigger spray allows for quick application on small projects or soaking on larger ones. The product dries in just one hour, leaving a glossy, paint-ready finish that protects bare metal from rust for up to a year. Non-toxic and suitable for both interior and exterior use, it’s the essential tool for professionals and DIYers aiming for flawless, long-lasting metal care.

Specifications

BrandKRUD KUTTER
ColorColorless (Black color code: 000000)
Finish TypeGloss
Size12 Fl Oz (Pack of 1)
Item Volume946 Milliliters
Special FeatureNon Toxic
Unit Count12.0 Fl Oz
Paint TypeSpecialty
Specific Uses For ProductInterior/Exterior
Surface RecommendationMetal
Item FormLiquid
Included ComponentsUnit^Instruction Guide
Age Range (Description)Teen
Is WaterproofFalse
Model NameNot Available
Package InformationBottle
Color Code000000
Full Cure Time1 Hours
Coverage12 sq. ft.
Water Resistance LevelWater Repellent
UPC618818406015
Global Trade Identification Number00618818406015
ManufacturerKRUD KUTTER
Dry Time In Hours1
Part NumberMR326
Item Weight2.33 pounds
Product Dimensions6 x 6 x 12 inches
Item model numberMR326
Is Discontinued By ManufacturerNo
FinishGloss
MaterialPlastic
Item Package Quantity1
Special FeaturesNon Toxic
Batteries Included?No
Batteries Required?No

Reviews

4.4

All from verified purchases

R**G

It really works well but takes patience if it's a large item.

I bought this to clean two steel hollow rods used on a radio antenna system. The Antenna was bought second hand and while 90% of it was aluminum those two 10 ft rods were steel and had been left outdoors on the ground for 5 years. Yep they were completely rusted and flaking.Taking them out to the driveway I wire brushed off all the flaking rust and then applied the Krud Kutter. The problem with doing large parts is that you cannot soak them in a container so you have to just spray them then let it sit for 30 minutes and then spray them again because the Krud Kutter will dry out. After 4 applications with an in between wash after the first two and then a final hosing off I had clocked about three hours working on them.The end result was at first a mixed bag of very clean shiny galvanized metal and patchy areas of darkened metal.On closer examination I realized it was not rust but just a left over stains that might come out with more soaking time. I decided instead to just use some 250 grit sand paper and rub it down lightly for 5 minutes. The once completely rusted surface was now 90% smooth and was left with just some small 1mm round pock marks on 10% of the surface from deep rust penetration.After cleaning off the rods with pure Alcohol I quickly sprayed the surface with cold Zinc spray. You really need to put something on the surface fast because if you leave exposed you can see a light powdery rust layer forming within minutes.After the cold zinc was sprayed and it dried I was shocked that I could clearly see the part numbers stamped into the metal, they looked as clear as if it was new! These were not even remotely visible before the treatment and I am pretty sure if I had used a hard sander they would have been rubbed out along with a lot of the surface steel. After giving the cold Zinc 48 hours to cure I used an epoxy paint that would hold to the cold Zinc Primer. The end result was almost a factory look as the paint filled out any tiny pits that were remaining.I am very happy with this product, it does what it says it will do and is better than any rust removal chemical I have used before. It does not eat at the metal, only the rust.

C**N

not sure why there are bad reviews this works much better than Evaporust and others

I used this on the frame of a 1960 Ford F100 Panel Truck and it had a lot of rust, not quite pitted on the entire frame but in a few areas. As well as on the undercarriage of the body.The trick is to keep the surface you are treating wet with the Krud Kutter. It is a phosphoric acid-based solution so if it evaporates, it will lose its effectiveness and stop working. The "white" that some people are complaining about is actually product of the neutralized rust which has been partially converted. Technically speaking, phosphoric acid isn't as much dissolving the rust as it is converting it. It causes a reaction and turns iron oxide (the rust) into iron phosphate which is very hard and stable and reduces the chance of further rust forming.The dreaded white residue is a crystalline structure that bonds to the metal, the good news is that it also inhibits rust from forming again, the bad news is that paint doesn't like to stick to it. The residue often appears when either the phosphoric acid is rinsed with water before it has completely converted all of the iron oxide to iron phosphate and exposure to air causes the very hard crystal structure to form and molecularly bond to the metal, or it can also happen if the phosphoric acid solution evaporates before all of the iron oxide has been converted.There are a couple of solutions to get rid of the white residue: 1) if it is appearing within minutes or a few hours of applying the phosphoric acid solution, you can typically apply more of the solution (make sure it stays wet with the solution) and it will dissolve the white while continuing to convert the remaining iron oxide to iron phosphate. 2) if the white crystal residue has been on the surface for days or weeks, then the best solution is removing it mechanically (e.g. wire wheel, steel wool, wire brush, flap disc, etc.), which will remove it but you will be exposing the raw metal again and it will likely flash rust within a day or two if there is any humidity in the air so be prepared to coat it with something (yes, more phosphoric acid solution/Krud Cutter will work and once all of the iron oxide is gone and the surface has remained wet with the phosphoric acid solution, the white _should_ not come back. YMMV, but I have used this many, many times on 20 to 30-year old rust with no trouble. Just keep it wet with the solution until all of the rust is gone.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
฿3558

Duties & taxes incl.

Thailandstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Krud Kuttermr32 The Must For Rust 32 Ounce Trigger Spray | Desertcart Thailand