Dongar Dashcam Power Adapter (10-pin Type H) for Hyundai/Kia. Compatible with Select Models, Ioniq, EV6, and More. Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

Great piece of Kit, easy to install, came with the correct adapter and also 3 types of connectors for your Dashcam. The box comes with instructions and how-tos via the QR code. Cable length is just right, not too long or too short from the rear view mirror, so it looks clean and tidy when set up. Runs perfectly when I start the car up and have had no issues with the power supply.

Clean and Simple Installation. As a tech and gaming content creator, I'm always on the lookout for solutions that combine functionality with a clean, discreet installation. The Dongar Dashcam Power Adapter (10-pin Type H) for Hyundai/Kia has exceeded my expectations and is an essential accessory for any 2022 Hyundai Tucson owner looking to install a dashcam without hassle. The first thing that stands out is how incredibly easy it is to use and install. I was able to power my USB Redtiger dashcam (which I also highly recommend!) by connecting the Dongar directly to my 2022 Hyundai Tucson's rearview mirror. This completely eliminates the need for long cables running across the dashboard or occupying one of the 12V outlets. The installation is literally "plug-and-play" and takes minutes. The fact that it comes with all the spare USB cable types is a fantastic detail. This ensures compatibility with a wide variety of dashcams, which is super convenient. I didn't have to worry about whether my dashcam would be compatible, as it came with all the necessary options. In summary, if you're looking for a clean, simple, and efficient way to power your dashcam in a 2022 Hyundai Tucson (or compatible models), the Dongar adapter is the ultimate solution. It works perfectly, offers an unbeatable aesthetic, and the installation couldn't be simpler. Highly recommended!

Brilliant piece of kit, makes fitting the dashcam very quick and easy.

Worked perfectly for my Mazda CX30, straight forward to fit, decent quality and easy to hide wires…

Simple and convenient installation on my Hyundai Ioniq 6. From start to finish took under 5 minutes.

Great product easy to install

A nice simple solution that saves much fitment time. I used this to mount a Nextbase dashcam in a 2021 Hyundai Kona, and the process took me less that 10 minutes. I previously have used the official Nextbase hardware kits in various vehicles which have been trouble free if a little fiddly. This solution is much quicker to install, quicker to remove if needed and you can be 100% sure that the wiring is not going to obstruct an airbag deployment. Comes with a useful trim tool and three different USB adapters - all from the USB A output of the adapter to USB Mini, Micro and C. None were compatible with the Nextbase input but I already had the correct lead so they became useful spares. I found watching a YouTube video more useful than any instructions provided. For my Hyundai Kona you needed the dimming interior mirror fitted in order for this adapter to work.

Ease of fitting was great, fitted into my 2021 Kia Sportage 3 1.6 mhev. Upon connecting everything up though I was getting no power to my nextbase 222 dash cam, Looking at the usb end of the adaptor I could see the light on so I knew there was power getting to it and I quickly realised it was the supplied short cable which was at fault. Took this cable and my dash cam indoors and plugged into my computer and there was 0 power going through the cable. For the price of this unit at over £40 you would expect the supplied cables to actually work. So some advice if you are purchasing this, do NOT rely on the supplied usb cables as they are complete rubbish, go buy your own at an additional cost on top of this expensive power adaptor.

First of all, it works well. I have a 2022 Tacoma Off Road, and the model that I purchased (12 pin, Type A) was compatible with my year and make. Installation took 20 seconds, and that's not an exaggeration. The adapter is basically just a bridge/extension cable between the vehicle and the mirror, with a USB-C connection point spliced in between. Before this, I had a fuse tapped under the driver's side panel, and I never liked it because the "add a fuse" kit stuck out further than the OEM fuses, which made it impossible to put the cover for the fuse box back on. That bothered me. This thing fixed that problem. Best part is that you dont have to run wires/cables through your trim. If you've ever done that on a hot summer day, you know how miserable it can be. The USB-C extension port has a sticky side that I stuck to the back of my mirror so it isn't visible. All and all, I'd say this adapter is well worth the money, is built very well, and will save you the headache and time of running wires. I'm so happy with this, that I'm considering buying the adapter that supplies power while the vehicle is off.

I installed the Dongar DashCam Power Adapter on my 2021 Forester Sport with a powered rear view mirror, and I found it to be an excellent solution for a professional, clean dashcam setup. It tapped the rearview mirror power, resulting in a super clean install with all wires hidden. The cable length was generous, easily reaching my windshield with slack for routing. It reliably supplies my camera. My installation was quick (~20 minutes), but I found removing the overhead console daunting initially; watching videos helped me demystify the process and locate the 5-pin harness.

Super pratique, plus besoin du câble pour alimenter la dashcam, cet adaptateur est une merveille. Très satisfait de mon achat.

Make sure you get the correct Dongar for your vehicle - then it is al so simple, quick and tidy. Great Device!! Totally removes the hassle of feeding wires from the camera to some remote power source.

The "Dongar Easy USB Dashcam Power Adapter" is an investment to lower your work and frustration in stalling a dashcam or other usb-powered item near your rearview mirror. I installed on my '21 Crosstrek, and it was an absolute dream. Two plug-and-play connectors into the existing wiring, and one connector from the usb dongle into the new harness wiring, and all was set. Fired up the vehicle power, plugged in the dashcam and all is working well. The most difficult part of the install is now going to be to decide where to place the dashcam so as not to interfere with Eyesight-- the power adapter itself is sitting right next to the mirror mount, so as not to interfere with said system. Canadian buyers be warned-- this adapter is significantly cheaper here on Amazon than directly through the manufacturer website. Just buy it here and don't bother searching elsewhere.