Ultimate Support JS-MS70 Jamstands Studio Monitor Stands (Pair) with Floor Spikes/Rubber Feet/Low Profile Base

Arrived next day via DPD courier (for free!), great service. For the money you can't fault these. I've got mine set up on a hard floor with the rubber feet. The floor in my room seems to curve upwards a little bit next to the wall where the speakers are. With a bit of trial and error positioning the triangular base, and by using the small amount of tightening adjustment on the rubber feet, I was able to get them pretty steady and the spirit level seems happy enough. They aren't 100% rock solid as you can imagine, but totally fine for home use. They would need a fairly significant knock to topple them on the middle height setting (which is at about ear level when sitting down in a desk chair). These have improved the sound of my KRK Rokit 6 monitors no end. I previously had them on my computer desk on Auralex MoPads. Even with MoPads the bass used to get really boomy above a certain volume, and even with the volume low they were only really any good if I was sat right in the sweet spot at the computer. Now bass is tight, even and detailed - they sound much better turned up now. The speakers are at the perfect height for sitting, and If i'm standing up and DJing on my decks in another part of the room i.e not in the sweet spot, the height is much better than when they were on the desk and I can easily swivel one of the speakers to get it sounding great. Overall I'm very pleased with these for the price, recommended.

I have these in my studio and in my lounge. Good quality monitor stands at a decent price in a market that charges the earth for this type of product. They are very stable (use the supplied spikes on a carpet), and extremely well built. They come with a small plastic clip that you can use on the safety peg for extra confidence, or to hang onto a cable, which lives in a hole on the side of the post. They make a professional looking addition to the home/project/budget studio environment where spending over £100 on monitor stands is impractical or unrealistic.

The stands are excellent, no complaints. However please note that it's a good idea to spray some lube on to the bolts during assembly. One of the top bolts was stuck fast (as delivered) and nearly sheared the allen key, but with a a bit of warmth and some 5 in 1 oil it came free. Build quality is high and these are good value for money! Would get full marks if assembly had been smoother.

Absolutely nothing wrong with these speaker stands. They can go pretty high but I have them on their lowest setting, which is roughly ear level when I am sitting down at my desk. If you keep them loose you can easily swizzle them. Very little wobble for a single post design. Can't really fault them at all. Excellent product.

I have put my KRK VXT8s on them no problem. Easy to assemble and I am sure they would just a good on the road as they are in my studio if needed.

stable, good quality, affordable. They fit my HR624's with an inch or 2 to spare. Assuming they could fit the hr824's.

I got these stands for my new KRK's delivery was fast but and the stands are stable and have good height adjustment. But my product had one flaw, one of the hex bolts was screwed in so tightly that it can not be removed. I have tired a few methods and it just wont budge i have emailed the company looking for a replacement part but it may look like i will have to return the item.

Great bit of kit! Only issue was that no instructions were included in the box. I was not sure if i had them set up properly at first but they seem fine now. Contacted manufacturer for instructions as they are not available online but no reply in two weeks.

Thanks to the other reviewers here I took the plunge on these and was not disappointed. Putting them together was a snap. They're nice and sturdy and have level bases which is nice. I'm sure the triangle helps with that. I use them to support my KRK Rokit 5 speakers. I had them on my desk for a while but it's really not the ideal solution. You want your monitors to be roughly at the same height as your head when sitting. You also don't want them butted up against a wall, they need some breathing room. After readjusting my room layout to pull my desk out from the wall and adding these stands in... The difference is certainly noticeable. I mainly wanted more desk room but was not anticipating such a great improvement in audio. The stereo/3d sound is way more accurate and noticeable now that I've positioned the speakers properly. Also, the sound is more true to the monitors purpose: unadulterated. Leaving them on a wooden desk often distorts the bass by causing reverberation, but while they're in the stands I don't experience this. Really happy with the purchase. One of them is leaning just slightly to the side, but I think that can be adjusted by a little man handling. Not a big problem in my book. I'd leave a star off for that, but this is not my first set of speaker stands purchase from amazon and id like more people to be aware of these as a high quality yet low cost option.

These are by far the best speaker stands I've ever used. Super sturdy, solid construction, better than previous wood stands that I've used. Each stand took me about 3-5 minutes to assemble (because I like taking my sweet time with my OCD and examining them in full detail as I assemble them). If you're in a rush, you can put one together in less than two minutes. The main trigger for me was the adjustable height. I needed something that would hold my front speakers at an appropriate height so that the Dolby Atmos speakers on top that fire upwards would actually bounce off the ceiling at the right angle. If you have Atmos- or DTS:X-style upwards-firing speakers, setting them too low doesn't give an accurate soundstage. I'm not pro at this stuff but it seems like a reasonable statement given the angles and my experiences with different speaker heights. The first criteria was how high I could get these stands. The problem I find with most stands is that they don't go high enough for me. I'm 6'4 so when I'm sitting down my ears are still at a pretty decently high level, and I like my speakers to be at ear level or higher. Please rest assured that these stands go SUPER HIGH for a small living room. I thought I would be maxing out the height on these but it turns out that would be way too high lol. The speaker base itself is also great in that it's large, it's square shaped, and it has the soft footings on two ends to keep your speakers in place. Overall, I would recommend these speakers to anyone looking for some sick stands, especially if you want to get the most out of those Atmos-style upwards firing speakers. 10/10

Sono di ottima fattura, con piolo di sicurezza nello stelo regolabile e semplicissimi da montare. Perfetti per le mie alesis m520. Se proprio devo trovargli un difetto non sono economicissimi.

Llegaron muy bien empacadas, y sin maltratos. Las piezas y tornillería completas. Son fáciles de armar, con solo dos tornillos por cada base en menos de 10 mins. Son muy estables al ponerlas en el piso y aguantan perfecto el peso de mis bocinas monitor (KRK) de 5". Se puede ajustar la altura sin problemas, controlar la posición para girarlas muy fácil rotando la base y fijando la posición con la perilla que sirve para apretar. Me funcionan perfecto. Ayudan a poder ajustar la posición de "triangulo" en el escritorio para tener una escucha perfecta de los monitores.

I've been looking for a pair of speaker stands for my Q Acoustics 3020 surrounds. I had short listed few and finally decided to buy Ultimate SupportJSMS70 stands. Let me tell you, it's worth every Rupee. Let me put down the pro's and con's of this speaker stand. ************* Pro's ************* 1. Value for money. There are among the cheapest speaker stands that you can buy online. 2. Excellent quality. Fit and finish is very good, no scratches and paint work is very good. 3. Easy to assemble. I was able to assemble both the stands in less than 10 mins. 4. Enough space on the speaker top. My Q Acoustics is around 5.5 kg and it holds very well. 5. Good looks. Some of the other stands were awful looking. 6. Excellent packaging. Product had a outer as well as inner carton to ensure that stands are safe. 7. Finally not a Chinese one, this stand is actually made in US. It's hard to find products made in US now days. ************* Con's ************* 1. Exposed speaker cables, this is the only downside of the stand. Stand has not provided an option to conceal the speaker cable, in fact they have provided hooks on the outside. I wish cable management was better on such a good quality stand. 2. Its sturdy for my speakers however I'm not sure if its good for speaker more than 10kg. Overall a very good buy.