Miniatures Storage Case Miniatures Transport Case (Large Size)

This case is a bit cheaper than Magna Sliders from Battlefoam. The other advantages that it has over Magna Racks is that you can configure the shelf height on the fly, and your models are kept fully encased (dust protection!). This is the kind of magnetic storage solution I have been waiting for. The covered cake trays I have been using are objectively cheaper than this solution, but they take up much more space and do not fit all models (they have a set height). They also do not fit an entire 40k army in one tray, nor are they stackable. The plastic this is made from looks nice and sturdy. It's not too light weight though, so the build case has a bit of heft to it. Not nearly as much as one build entirely of wood, though, I'd imagine. The trays themselves are thin and feel very light weight, but I consider that an advantage. Magnetically, they do the job better than covered cake baking trays. I am not worried about my models sliding around or getting loose. The connections for the screws in top and bottom look up to the job, but over-tightening will definitely cause them to be ripped out of the plastic. Use common sense and you'll be fine. You can tighten the screws, and you will feel when they are secure. That's where you stop. I don't worry for a second that the screws will rip out of the plastic in normal daily use, not even with much more weight in the case than I have in it. The door is held closed by friction. This seems like a bad idea, until you actually feel the closure, and then you realize it's just fine. This was the biggest thing holding me back from ordering (you know, in the hemming and hahing phase) but it turned out to be a total non-issue for me. What would have made this case better? 1. I would have liked something to secure the door. Nothing a strap won't fix, but that would've been nice. However, Jucoci has a bag on the way, supposedly, that fits this case. That totally resolves this issue, I suspect, as it really only is a concern in transport (and really probably not even then...) 2. I would've like to be able to put a carry strap on. Again: the promised bag will likely take care of this. 3. It would've been a great idea if this was made to securely stack. These cases do stack, as the handle folds down in an indentation in the top, but there is no feature that would prevent the top box from sliding off. I think that's a bit of an oversight in the design. They should have made some bumps on the bottom, and matching divets on the top, to prevent the cases from sliding around when stacked on top of each other (or some similar solution). All in all, I highly recommend this case. The issues listed above are nitpicky at best. I think this is the best magnetic storage on the market right now, and also one of the cheapest (if still NOT cheap!)

The Jucoci Miniatures Storage Case is a game-changer for any serious tabletop gamer or miniature painter. I upgraded from transporting my miniatures around in a large cardboard box. Key Features: Spacious Interior: The large size is perfect for storing a significant number of miniatures, with customizable foam inserts that accommodate various sizes and shapes. Durable Construction: Made with sturdy materials, this case ensures your miniatures remain safe during transport. Convenient Design: The handle and compact design make it easy to carry, even when fully loaded. Benefits: Protection: The foam inserts provide excellent cushioning, preventing damage during transit. I once dropped the case down a flight of stairs, and to my amazement, everything inside was perfectly intact. The handle also feels high quality and sturdy, not cheap plastic. Organization: With its customizable compartments, organizing your miniatures has never been easier. No more sifting through a tangled mess of figures! Aesthetic Appeal: The sleek design and professional look mean you can transport your miniatures in style. Drawbacks: Weight: Even when empty, the case is noticeably heavy (M,42 in good shape). When fully loaded, the case can get quite heavy. This isn’t a deal-breaker, but it’s something to keep in mind if you’re lugging it around a convention or game night. Price: It’s on the pricier side compared to some other storage options. However, the quality and protection it offers make it a worthy investment. Magnets: Once you upgrade, you'll want/need to magnetize your models for style. The Jucoci Miniatures Storage Case is an excellent choice for anyone looking to protect and organize their miniatures. Its durability and customizable features make it worth the investment, despite its heft and price. Whether you're a casual gamer or a competitive painter, this case will ensure your miniatures travel safely and in style.

This case fits my Wriathknight and a ton of infantry. It’s great to display and store my models. It’s sturdy enough to transport to my LGS.

Great solution for storing and transporting wargaming miniatures. The plastic used is the cheap hollow kind that doesn't inspire much confidence, but I've had it for almost a year now and it's still holding strong. The trays are great for magnetized bases and keep miniatures from sliding around (if they aren't magnetized they will slide). My only issue is that due to the type of plastic used, the fit is a bit off. I have slight gaps where the top and bottom meet the side panels. I somehow managed to fit almost 3000pts of tyranids into it. Full tray of termagaunts on the very top level with a few ripper swarms and the small neurogaunts bring the only others short enough to fit that top level. Slightly larger models such as hormagaunts (due to their poses) genestealers, gargoyles, etc. fit in the next tray (about 3-4 slots down). Then mid sized height nids such as carnifex, Hive Tyrant, zoanthropes, neurotyrant, leapers, a Harpy (without base), Maleceptor, etc. fit on the next level (about 4-5 slots down). At the very bottom level slot I have large nid models with Exocrine, Screamer, winged hive tyrant, tyranofex, deathleaper, and a psychophage. A few other random models fill in gaps here and there. It's a bit of a puzzle to figure out at first, but you can pack quite a few models into it. I may edit my review to add a picture later. Overall a good storage solution that could improve quality a tiny bit to be great.

I own two of these cases. When I initially got them I was in love with the ease of use and how modular they were in comparison to the foam trays I had been accustomed to using. Very quickly however I began to notice issues with the cases. Because the case is entirely plastic, warping has become a serious issue. One of my cases is now completely useless as the lips that the metal trays ride on are too far apart to hold the case in place during transportation. The other case, which I bought at a slightly later date, is holding up for the time being but I'm already beginning to notice where the sides are beginning to bow out. I will never recommend a product that deteriorates so quickly, especially not when it is intended to protect expensive Warhammer miniatures.

Really good service, item was really good. Easy to build. Got 2-3 trays had some defects likely due to delivery. Got in touch with the company and explained the situation with images of the defect. They were so professional and efficient. Within 5 days, I managed to get my replacement trays.

I liked how easy the container was to put together, and the unprompted message from the seller that there were errors in distribution, so if I was one of the unfortunate ones that received the incorrect order they would send me the updated case without a second thought. Definitely getting what I paid for, as it holds all of my miniatures, is pretty sturdy and just pretty to look at. My only gripe is about the plugs that hide the screw holes. They fall out so easily. Figure I'll just glue them in.

While I cannot blast this product too badly, I can confidently suggest looking elsewhere. The case was a little frustrating to put together. Even being very cautious I ended up stripping a few of the screw locations, and was not confident that it would hold up to much abuse. Thankfully, I purchased mine as a stand-still, "cabinet" of sorts to store unpainted minis. Which I am glad that's all I used it for, as the sides slowly spread apart causing the trays to fall inside the case. I fixed this with a bit of plastic glued to one of the tray sides to make the fit a bit tighter, but this should not be the case for something at this price point. The trays are nice, low profile, and are great for magnetized minis. Having a plexi door in the front allows for a little look into what's on each shelf, which is pleasant. And I will say the overall aesthetic is nice and industrial in a way, while still being lightweight, although the durability of the plastic construction is a little shaky at best. I would not trust my collection in this for any amount of travel, or any great amount of wear and tear. I suggest looking elsewhere for something more durable.