UV Resin Kit with Light, Bonding&Curing in Seconds, 30g UV Resin with Flashlight for Welding, Jewelry UV Glue Adhesive for Plastic Repair, Glass Light, Craft Decor

I’ve just been puttering around my house looking for things to fix. I love that you can spend as much time getting the pieces lined up as you want before you hit it with the UV and harden the resin. So much nicer than superglue or epoxy in that respect. I don’t think it bonds as well as superglue or epoxy. I’ve already had to go back and re-repair a little decorative piece on a soap dispenser that I reattached with this stuff. It’s brittle and if the UV can’t hit it, it won’t harden, so flat, opaque surfaces are going to be a challenge- but if that’s what you’re working with, just use superglue. This stuff excels at tiny, fiddly fixes like ornamental pieces and toys. It is a little pricey. The cure time is longer than I expected- maybe the included UV light is just weak but I was holding it for 30 seconds, not 5. I haven’t had to clean up any spills but I suspect that could be a problem- not as bad as CA glue of course. All in all I’m very happy to have this in my toolkit.

Best little tool I’ve bought! I’ve used it to repair so many different items. Great on glass, small ornament breakages, cover up glitter. Love that it’s UV CURing too. Not a bad smell either and everything has held up very well when used on for the appropriate application. It’s a game changer too bc it dries in minutes and even seconds!

So far tried this to repair a cracked taillight. Went on smooth, hardened well, will try for other projects.

I am trying three products: Flashfix, Bondic, and Let's Resin. Let's Resin is the most generous of the three: there is more liquid plastic in the bottle. Which is good. The liquid is also thicker than the other two; so it will work better for applications where the goal is to build up thickness. Finally its flash light is the best: it is easy to hold and use AND it is rechargeable; YAY! So, in the end all three do the job. Flashfix comes in a nice, durable little plastic box. The kit offers very useful items: it has a soft scruffing file to abrade any surface you want to work one. This is great! The blue light flash light is very easy to use and works well. Its battery is insulated until you are ready to use; so it remains charged until your first project. And, they include some alcohol saturated wipes to wipe out the residual tackiness when the plastic has cured. The only downside of the Flashfix kit is that the bottle is not full; in fact it only has a little of the liquid at the bottom. The product itself works well. Bondic comes in a very good metallic etui. The applicator is very precise and easy to use. But the light is very hard to keep activated: it demands far too much thumb pressure. The product works well. The light's issue is a defining issue for me: I do not have the grip strength to use it; this is why I ordered the other two kits to try. I don't know yet how much liquid plastic is actually in the shank.

This glue is very handy and super fast setting. Works great for clear glass repairs, but also can be used an external repair in other applications that don't pass light. The UV light is rechargeable and the glue remains in a (somewhat thick) liquid state until the light is used, allowing for positioning of pieces prior to the glue setting. I have not had much luck with super glue as a general rule, but this glue has been great in the situations where I needed a quick repair. I am not sure about bond strength for anything that will have any significant stress applied - have not tried an application like that yet, but where you might otherwise use super glue or epoxy to make a repair, this might suit the need, or at least hold the parts in position while you apply some other bonding agent. Within just a few seconds, the product is set - no running, and you don't have to hold the pieces together for long.

I bought this hoping it would help with a specific project. It worked AMAZINGLY!! I only used about a quarterly of it & was happy to have leftovers on hand. About a month later another opportunity to bond something presented itself……It’s not working AT ALL. I’ve shined the light on it multiple times and it won’t solidify at all. Still gooey. I DID store it in a cabinet in a cool dark place even. ……SO,…….it has a pretty short shelf life. Works wonders when it’s brand new.

This resin is so easy to use. I have used it to tack pieces on my crafts, made earrings and key chains. Great product.

I bought this "sample size" bottle to try as I make miscellaneous "crafts" ie; "Keychains, pendants, ornaments etc utilizing the original to form a reusable silicone mold & 2 part resin epoxy. to ensure the ratio is correct, I use a metric scale. A tedious process with zero margin for error. This product was much simpler, however, after using the included uv light plus 24 hours cure time. They were sticky and pliable, Could be my fault? living in a warm climate, I put them on my balcony to cure in the sun. So far, so good. The color is crystal clear, texture is smooth, despite using less. My 2 " sample" pendants were easy to remove from the molds. Much easier process, seems stronger but longer cure time. I'll try again.

Solo funciona si las dos partes a pegar pueden espar expuestas a la luz.

Es klebt alles wunderbar miteinander. Nur dort wo das UV-Licht nicht hinkommt, kommt es eben zu keiner Reaktion und der Kleber wird nicht fest, was eine zeitlich nicht limitierte Ausrichtung der zu verbindenden Teile zulässt. Bei einem normalen Sekundenkleber: Kleber drauf, Teil hingehalten, fest - nix mehr auszurichten. Dort wo das UV-Licht jedoch auf den Kleber auftrifft, tritt die Reaktion innerhalb von 5-10 Sekunden ein und es bildet sich eine feste Verbindung der zu verbindenden Teile. Ich hatte Probleme mit einem sehr filigranen Modell mit Klemmbausteinen; dort fielen immer wieder kleine Teile ab, ordinärer Sekundenkleber kam für mich nicht in Frage, da ich mit der Zeit dann sicher selbst Teil des Modells geworden wäre. So aber trug man an den gewünschte Stellen etwas Kleber auf, der eben ohne UV-Bestrahlung so lange nicht aushärtete wie man Zeit benötigte, um alles an Ort und Stelle zu fixieren. Dann 5-10 Sekunden UV-Lampe einschalten und schon war das ganze fest. Nun ist ist Modell fertig und ich bin voll zufrieden mit dem Ergebnis. Man muss jedoch dazu sagen, dass aufgrund der oberflächigen Verklebungen diese nun sichtbar sind, was für mich aber verschmerzbar ist, da der Kleber relativ transparent erstarrt. Wie stark die Klebeflächen belastbar sind, konnte und wollte ich nicht testen, jedoch sind von den von mir mittels diesem Kleber fixierte Teile nicht mehr abgefallen. Ob dieser Kleber einem reinen Sekundenkleber in Sache Klebekraft gleichsteht, muss man selbst prüfen. Zu erwähnen sein auch, dass sich die UV-Lampe sehr hochwertig anfüllt; zudem ist sie über USB aufladbar. Tolle Sache. Das Kleberfläschchen selbst ist mit einem Siegel versehen, dass den Kleber vor dem Auslaufen und Austrocknen schützt. Da der Kleber ohne UV-Bestrahlung nicht aushärtet, Beigelegt ist eine aufschraubbare Dosierspitze, welche eine feinere Öffnung für eine bessere Dosierbarkeit aufweisen könnte. Nach getaner Arbeit lässt man das Fläschchen eine Zeitlang stehen, so dass der Kleber aus der Dosierspitze zurücklaufen kann, dann wird diese Dosierspitze abgeschraubt und der Deckel des Fläschchens wieder aufgeschraubt. Am besten stellt man das Fläschchen an einem dunklen, trockenen Ort. Und ja, man sollte sich auf jeden Fall Einmalhandschuhe anziehen, denn der Kleber hinterlässt, auch wenn er nicht mit UV-Licht bestrahlt wird, eine klebrige Kontaktstelle, die schwer zu entfernen ist.

Great little kit. Managed to successfully mend a filigree bracelet and earrings with this, without the need for very tricky soldering. Also a small drop to just help secure small chain rings, just in case they open again. Even an earring post on the back of filigree earrings, yes there is big blob of resin at the back, but you can’t see it and so far so good and at least they can be worn again, will see how longevity goes :) For tricky work may help to need another pair of hands or some blue tack or equivalent to hold item still, applied resin and quick cured with the UV pen and then did a longer cure again using their UV mini lamp which is in another kit :)

Fonctionne parfaitement comme décrit. Je m’attendais à un résultat moyen vu un commentaire négatif mais au final fais parfaitement le job ! J’avais acheté de la colle PLA qui ne marchait pas, j’ai testé cette résine et la lampe UV et là : magie. La résine est un peu épaisse comme un gel et permet d’être placé facilement sur de petites pièces. Elle durcit vraiment en 5 secondes avec la lampe UV comme promis. Si on en a trop mis le résidu est transparent et s’enlève facilement. Je recommande !

As always this is a great make of UV resin and although I have a couple of different sizes of UV lights including a double one with the tray in the middle this little pen is great for very small UV hardening for example if I'm attaching an already made resin item to let's say an earring stud or similar, definitely very useful, recommend, good value for money, it's good quality resin and UV pen and easy to apply, very low odour at all, adheres well.