AEROPRO TOOLS R500 LVLP Air Spray Gun w/ 1.3/1.5/1.7mm Nozzles & Air Regulator, A610 Paint Guns Automotive, Car Paint Gun Sprayer, for House Painting, Car, Furniture, Varnish & Top Coat, black

My first paint gun, but seems to work well and I’ve had decent results. I’m painting parts but the finish is great. Seems pretty easy to dismantle and clean which is very important. Overall I’m happy as a beginner.

For the price this puts down the paints and primers great, using a 50ltr compressor with 9.6cfm, only used the 1.3 but going to try flakes with the 1.7

Bought a slightly lower air compressor. The other was too Big. 150 psi. This one 3hp 120psi. Should more than do the trick. Seems Solid as well.

First time spraying so I don't have other spray gun use to compare it with. Bought this due to the reviews on YouTube and on here. Only used twice so far, with epoxy primer and 2k metallic direct gloss both using the 1.5 fluid tip. Really happy with how it layed down paint, slight orange peel but that could easily be reflective of user inexperience rather than the gun itself. Looking forward to trying it with conventional base and clear. I suspect the cfm rating is slightly optimistic however, I used with a small 50L compressor which should manage 7cfm and I had to let it catch up on a couple of occasions. Seems well made so for the cost I am very happy with it.

The box arrived severely dented but the items inside appear fine...

The best one in it's price range

Air intake control did nothing no matter what I did. Just didn't let any air pass through. Luckily I could remove it and use an external regulator but a bit of a pain when I've waited 3 weeks for delivery. My £20 draper guns work better, but I needed an lvlp gun and this was one of the few available

Got everything setup and all excited about trying out the new gun. Turns out the inline pressure regulator/gauge is fault. Reads 0 all the time and lets only a tiny amount of air through regardless of adjustment. Seriously disappointed having waited for 10 days for this gun to arrive in the UK.

Excellent product and delivery time, highly recommended.

I've been spraying paint for 60 years, these spray guns are a lot of bang for the buck, as good as many of the high priced spray guns I've owned. They lay down paint as good as any other professional gun for a fraction of the price, it's a winner. As advertised this LVLP spray gun when paired to a small compressors all the way down to 20 gallon capacity, it will do a fantastic job. I personally found it to do an excellent job shooting Acrylic Urethane, lacquer, single stage, base coat, clear coat, and primers. For the price of this AeroPro R500 A610, purchase three of them, so you don't have to change spray nozzles, set one up for primer, one for base coat/Acrylic Urethane/ Clear Coat, you'll still pay less than one expensive Devilbiss gun. Don't believe all the negative hype that these AeroPro R500 A610 LVLP spray guns are junk, mechanically they're excellent quality and mechanically sound. I read one review that contained a complaint that the pressure regulator lens is plastic, fact is that it works, second as any old timer knows who's a bit creative, either purchase one with a glass lens, or simply make a paper flap to protect it from over spray, easier yet, wipe the thing off. You purchased a great spray gun for a great price with accessories. As always, it's the guy squeezing the trigger that's important, that comes with experience and time. I've read a few negative complaints about the AEROPRO R500-610, it was obvious from the complaints they more than likely originated from inexperienced users. Complaints that the spray gun tip could not be removed, possibly cross threaded. The fact is this complaint is not all that uncommon, over the years I've found a few spray gun tips that were excessively tight, generally the tip is not cross threaded, just over tightened during assembly, with the proper tools, experience, and patience you can get the tip loose without damaging the spray gun. Leaking spray guns, generally, during my 60 plus years of spray painting, I've found that a leaking spray gun is due to over pressure, water getting into the air line, improper cleaning. A leaking spray gun is a common problem amongst professionals and amateur sprayers alike. It’s often caused by the fluid nozzle becoming loose or dried paint blocking the needle, another words, cleanliness is an absolute must with spray guns. A leaking spray gun can also be caused by a damaged needle packing, this falls back to improper cleaning/maintenance, over pressure, etc.. Paint sputtering: this usually means that your nozzle simply isn’t on tight enough, or that the spray gun wasn't cleaned properly. Spray gun painting, especially automotive spray painting is an art that must be learned over time, most of these problems are caused by "cockpit error, not the equipment, far too many are too quick to blame the equipment. Number one, use only the proper solvents when cleaning, the wrong cleaning solutions can damage, or turn your spray gun into a useless piece of junk. Update: I purchased a second AeroPro A610 so I could have one gun setup for primers, and one for base, and clear coat and I purchased a 5 piece nozzle set to handle all types of paint and primer types. My only con is that in general, all these spray guns seem to focus on how pretty they are and have a slippery finish, the handles should have a textured surface, it's like that Glock pistol you own, you don't want it slipping around in your hand so you have complete control. Anyway, the AEROPRO 500-A610 IS A Winner.

Die Aeropro R500 hat ihren ersten einsatz hinter sich und ich bin begeistert und habe nichts auszusetzen , sie macht was sie soll und wofür sie gemacht ist. Ich würde sie weiterempfehlen und auch nochmal kaufen ....

Chegou tudo certinho, produto maravilhoso era como eu esperava, igualzinho do anúncio.

Aún no lo uso pero se ve de buena calidad y lo compré por que tiene comentarios buenos