AMOLED for Samsung Galaxy S21 Ultra 5G Screen Replacement with Frame for Samsung S21 Ultra Screen Replacement kit SM-G998u G998a G998w LCD Touch Display digitizer with Tools Black

Works great. Everything fits perfectly and the display has great quality. The included screen protector actually has beveled edges, and a hole in the bottom-center for the fingerprint scanner. The included screwdrivers (especially the triwing) are tough to work with and wore out quickly, I don't recommend using them and instead get a nice precision kit that includes a suction cup. Heat gun is a must with this phone.

Good and affordable! Works like it should, very little difference than oem. Very easy to install, just take your time. It seems it can last for a good amount of time.

Fits the phone and display is as described. Love the resolution and touch response, but after installing in my samsung galaxy s21 ultra 5g, it has major lag running 120fps adaptive refresh rate. Almost can't use it unless you switch to standard. There is also a gap at the bottom of the screen so it doesn't flush to the whole phone like the original. Yes it works, but isn't perfect

The screen kit arrived in a padded Amazon envelope and encased in a cardboard book for protection. I removed the screen from it's styrofoam bag and was able to replace my screen with a few swears and crash outs. The screen has blotches all across. I am returning this trash. My experience installing the screen was difficult. Removing my phone's back panel was the easiest part, as I used my hair dryer, slid a guitar pick along the top of the phone, and within seconds it came right off. I had the biggest difficulty removing screws, as some were extremely difficult to remove with the included screwdrivers in the kit. I had seven stripped screws and the kit's screwdrivers almost gave me a blister so I had to take multiple breaks throughout the process to prevent blisters. I was able to remove the motherboard and daughterboard (power board) without issue. Many of the difficult screws were on the rim of the phone for the two 5g antennas and the one cell antenna at the top. I used a rotary tool (Dremel) to violently remove some screws from the old housing. I actually snapped and bent the cell antenna out and it still works lol. To remove the battery from the old housing, I used my 1800W hair dryer, dollar tree isopropyl alcohol 91%, an old credit card, and a metal nail file. What I did is I blowed on the front screen for 60 seconds (i listened to a minute-long song to keep track) and then sprayed isopropyl alcohol from a tiny spray bottle onto just the sides of the battery. Then I used my metal nail file to scrape the glue from the sides of the battery, making sure not to bend the battery. Then I shoved my old credit card under the battery and slowly scraped it out of the old housing. I did not glue my backpanel back onto the phone because I was just too tired and it was pointless since I don't swim or otherwise put my phone near water anyway. I used a lot of kapton tape to keep things in place just in case though I am sure it will be ok. If you want to know the glue you're supposed to use, it's T7000. The screen is smaller than the original, and there is a 4mm empty space on the bottom of the phone. The screen kit did not include the wet wipes and microfiber cloth as stated in the listing. If you want original quality, this screen is not a good replacement, but it IS fully functional. My S pen works, my fingerprints from the previous screen work, and I can use my selfie camera without problems. So if you just need a screen this is it. If you want that original Samsung quality, you need to get an OEM screen. I highly recommend adjusting display settings because this screen doesn't feel as high ppi as the original. I did not use the included tempered glass screen protector because I like to use the adhesive hydrogel type of screen protectors, which work fine with this new screen. The tempered glass screen protector has a hole in it for the fingerprint reader if anyone is curious.

Got this to replace my SM-G998u screen that cracked. Noticed right away the molding is off. There is a gap between the USB port and the base of the frame. This set up will in no way shape or form be water proof or even remotely water resistant. A small splash in the usb port will fry your phone. Upon finishing installation phone boots fine, can verify the screen is not oem, or oem size, it's about 4mm shorter. it looks fine. No signal though. It reads my sim card and provides signal strength, but it's stuck in "emergency call only" I swapped back to the old frame with the half broken screen and it worked right away. I need a working screen so I'll be keeping it...but do not get this frame. Literally any alternative would be better.

As expected, just watch a few YouTube videos and was done in less than 30 minutes

Bought this screen twice, the first time the quality was great, all the antenna pads and ground pins lined up and had conductive tape. Recently purchased the same screen again and nothing lines up correctly.

definitely recommend purchasing this. Ease of use. Perfect fit. Durable. Screen quality exceptional. Feels like a new phone.

Item arrived on time but the LCD screen had round black circle of dead pixels around the front facing camera lens

Bug

Would Give zero but unable to. I can't take a photo unfortunately cause my phone is the only camera I have. The screen looked ok, but when I changed it there was several lines, and half the screen completely white. Rendering the phone useless.

J'ai un problème mon cellulaire chauffe