Germany Raceblade Pro & Raceblade Long Mudguard Set, Bicycle Accessories for Road Bike (Bike Protection with Quick-Release Attachment, Length-Adjustable Struts, Lightweight and Extra Long Spoiler)

Really good product, they are made in Germany so of course they are! Easy to fit and adjust. Work great on my Road bike

5 stars for fit, 5 stars for quality, 5 stars for ease of fit. However, they ruin the lines of my otherwise beautiful track bike. I use my track bike to commute in all weathers and can put up with wet feet and a black line up my back but was getting fed up with grit in the drive train. Fitted these puppies and was amazed that my feet were almost dry after a 45km commute, just after the rain. I love these things (but hate the looks, did I mention that?). As mudguards go, they're no worse looking than any other mudguards, I just don't like the look of any mudguards. Would I recommend? Without hesitation. Do they disconnect in 3 seconds so they don't get stolen? Yes. Do they fit again within 10 seconds once initially set up? Yup. Am I going to buy another, larger pair for my gravel bike? Hmmmmm. Tempted....

The mud guards are designed to be quick fit I bought them because of the quick fit feature and they would hopefully allow a 25mm tyre to be used. I curently use 23mm tyres. The stayas of the front guard needs to be shortened as even if you adjust it to the maximum from the screws they are still too long. Soo I would need an angle grinder to shorten the stays and that is the main disadvantage The quality otherwise seems to be good, but not shure how long the elastic rubber used to fit them to the frame would last. They look ok on the bike but some People dont like the look of a bike with mudguards on. But that is the sacrifice if you don't want to be splashed. It would be nice of the back mud guard was longer because ot only goes up to the breaks. I would benefit if it was going past the breaks and down the wheel for a better protection. I recomend it for people who want some quick fit, quick release and have an angle grinder and can cut the stays to shorten them a bit.

Bought my first pair last year (2023). Pretty easy to fit, if a bit fiddly at first. Two seconds to remove them if need be. Once they've been set up to suit your disc brake bike, piece of cake to reattach them again after removal. They do the job, and keep the wet splashes from your backside and front of legs. Not cheap, although I have bought a second pair recently for another bike.

Having suffered for a long time during wet weather, decided to invest in a set of mudguards for my road bike. Arrived in good time, first impression when unpacked was that they look sturdy and good quality. Stood bike on bike stand to fit, once adjusted to roughly the correct size, easy to secure to the forks. Adjustment took little time before they were in correct position to lock. Care with front mudguard, ensure it's back sufficiently to avoid coming in contact with your feet when turning sharply. Been out a few time now, they do the job well and on rough roads you don't know they are fitted. Would recommend to anyone looking for good quality mudguard for road bike PS: will probably remove during the summer months, which will be an easy job.

These are excellent quality mudguards, I bought them for my Trek bike hoping that they would have sufficient clearance, in the end I had to modify the rear brackets and take them over the frame rather than through the usual mudguard anchor point. Despite this, they were easy to fit and relatively straightforward. Trek riders beware, but once fitted, great mudguards and very smart.

Easy fit and swap between bikes, a little flimsy but straps appear to secure well to frame, as a damaged package purchase ,this was certainly worth the price

Unfortunately I cannot give this a good review as the listing is deceiving. There is nothing to suggest that it could fit a wider tyre.

Beide Schutzbleche passen wunderbar an alle Rennräder mit 700C Bereifung und U-Bremsen. Die Schutzbleche sehen durch das glanzschwarz sehr elegant aus, was geschmackssache ist. Die Montage und feinjustierung sind sehr einfach vorzunehmen. Sehr hochwertige Materialien.

Auf der Suche nach schnell zu montierenden Schutzblechen für mein Pendlerrad (Cyclocross) habe ich mich nach recht umfangreicher Recherche in diversen Radforen schließlich für dieses Produkt entschieden. Nach mehrwöchiger Benutzung sowie einigen An- und Abmontagen möchte ich die Schutzbleche an dieser Stelle kurz rezensieren. Die knapp 400 g schweren Kunststoff-Schutzbleche passen laut Hersteller für Reifenbreiten von 25-32 mm, sind also vornehmlich für Renn- und Crossräder geeignet. Das Quick-Release-Befestigungssystem ist über zweigelenkig gelagerte und in der Länge verstellbare Metallstreben mit dem eigentlichen Blech verbunden. Die Montage erfolgt an den Hinterradstreben bzw. Gabelbeinen (Vorderrad) mit Hilfe elastischer Gummibandagen. Als Schutz gegen Lackschäden liegen den Blechen Lackschutzfolien bei; allerdings sind die Auflagepunkte mit relativ weichem Kunststoff versehen, so dass die Folie im Grunde obsolet ist. Die Einstellung/ Justage der Bleche erfolgt einserseits über eine Änderung der Strebenlänge (dadurch Regulierung des Abstandes zwischen Schutzblech und Rad) sowie über die zweigelenkige Verbindung (zur Anpassung an die Rahmengeometrie). Sowohl Strebenlängen als auch die Gelenkverbindung lassen sich durch Inbusschrauben fixieren. Während die Erstmontage und Einstellung noch ein wenig "Fummelarbeit" bedeutete, lassen sich die Schutzbleche nach einigen wenigen An- und Abmontagen mittlerweile in Sekundenschnelle anbringen. Der Sitz der Bleche ist bei entsprechender Einstellung, sowie nach korrekter Arretierung der Inbusschrauben und ausreichend festgezurrten Gummibandagen hervorragend. Lediglich bei holprigen Wald- und Schotterwegen in Verbindung mit hohen Geschwindigkeiten konnte ich bislang ein leichtes Verrutschen der Schutzbleche feststellen. Nützlich sind insbesondere die relativ langen Spritzlappen am Hinterradblech (vor allem bei Gruppenausfahrten dankt es einem der Hintermann), während die Spritzlappen am Vorderradblech mitunter die Füße streifen können, je nachdem, wie weit vorne der Fuß auf der Pedale steht. Fazit: ¯¯¯¯ Die einfache, schnelle und durchdachte Montage sowie die vielfältigen Einstellmöglichkeiten machen diese Renn- bzw. Crossradschutzbleche zu einem idealen Begleiter bei Regen und Matsch. Hier wird effektiver Spitzschutz zu einem fairen Preis-/ Leistungsverhältnis angeboten. Uneingeschränkt empfehlenswert.

Il s adapté parfaitement entre mon porte bagage et ma roue , et il fait le tour de la roue ,personnellement comme le porte bagage n était pas d origine les vendeur me disait qu il n était pas possible de mettre un garde de boue ,la photo montre que grâce à ce produit c est possible, petit point négatif, les boulons pour serré le tout ne sont pas fourni

I got my first set of these at REI and then when I ran over a stick and the back one broke when the stick got sucked up the wheel I knew I was getting another replacement. They have good coverage on your wheels and get very far down to keep a good amount of rain off you. They have a neat attachment system that connects to the same bolt your rim brakes mount to. So if you are comfortable taking those off then you should be good to install these. I had a bike ship install them the first time but I just popped the replacement on when I broke the rear one and didn't have to replace the mount. If you want to take them off then they aren't too much of a struggle. You can angle the mounting stubs on the wheels away and it doesn't take a long time to take on or off. Basically: Great rain coverage Not too crazy to install but will take a little time if you know how. Not too heavy (I'm not picky about weight but these are pretty light).

Muy bien acabado y facil de instalar