VEVOR Screen Printing Machine, 1 Color 1 Station Silk Screen Printing Press, 21.2x17.7in / 54x45cm Screen Printing Press, Double-Layer Positioning Pallet, Adjustable Tension for T-Shirt DIY Printing

I appreciate the bevel on the shirt board. It makes it much easier to insert a shirt compared to a board with a 90 degree edge. Goes on and get off smooth and efficiently. You can’t go wrong with Vevor. Good prices for good quality— and that’s everytime.

The setup took a little bit of time, but the directions are all there for you to follow, and the tools are provided. The machine is pretty sturdy and it is easy to put the screen in for screen-printing. It's a pretty good price for a 1 color single station screen printing press.

(Four stars for beginners) The Vevor printing machine CAN be adjusted to get a thin, even offset from the work surface. It takes too long to adjust if you're trying to pay the rent with this machine. I recommend using screens with aluminum frames. My wood frame couldn't get the adjustment right. The grips need to be tight and that just kept smashing the wood. Adjusting the fit was never predictable. My aluminum framed screen was much easier to adjust. That said, there are sooooo many nuts and bolts to adjust to get an even offset. If you want to do ONE production run per day, you should be fine. I was printing white ink on black material. I used Camie 380 Screen Printer Spray Adhesive on the platen. I made three passes with the squeegee. In between passes, I used a hair dryer on high heat to flash dry the ink. The final image had absolutely zero ghosting. I only needed to do a few shirts, and each one was perfect. However, I do not know how this would work after 50 shirts. CAUTIONS: 1) ADJUST YOUR SPRINGS AND YOUR STOP PAD! You want the tension to be just high enough that the screen will stay up with the squeegee resting in the back area of the screen. But you also want the screen to hold itself in place against the stop pad (a bolt near the back of the unit). The sensation is that as you lower the screen, the springs are pulling it back up UNTIL just before it hits the stop pad. At that point, you will feel the spring tension let up. 2) DON'T LET THE SCREEN FLY UP! The screen has two positions: All the way up; and All the way down. There is NO in between and your hand MUST be holding on to the screen between those two positions. Otherwise, the screen WILL fly upwards launching your squeegee and messy messy ink into the air. No, I did not learn this the hard way. 3) INSERT AND REMOVE SCREENS IN THE UP POSITION! The weight of the screen is helping to hold down the spring arm. If the spring arm is down when you remove the screen, the spring arm will launch upwards throwing the machine around and uncoupling the springs. Without the springs in place, the arm comes crashing back down. Yes, I learned this the hard way (at least no ink went flying). All that clattering about will throw all of your adjustments out of whack. If you are then going to insert a second screen to do a second production run, you will have to readjust everything to get your offset correct. This is a ONE color machine for producing monochrome prints. Don't complain if you cannot figure out how to get it to do two or more colors. That's not what it is designed to do. The 17mm wrenches that come with the machine are crap. I'm going to get a couple better ones to keep with the machine. I recommend this machine if you are new to screen printing and are not able/willing to invest 10x the price to get a high quality machine.

Excellent for the price. Works well. Easy to adjust for the size of your screens.

Instructions have mistakes. Holes weren’t drilled evenly and the base arm is crooked. Annoying to assemble due to types of bolts and screws. Definitely not a great product.

Incredible tool. Sturdy and balanced in use. It took me some fine tuning as a newbie to get the spring set just right. Very pleased with its performance. Super value for one color printing. A well placed tape hung full transparency worked to do multiple colors (screen changes) in a pinch.

I bought this because i am still in the beginning stage of screen printing. I can say that it works pretty good for me,some thing i dislike but what can i say for something that is inexpensive. Seen some reviews about missing, damaged or even mis alighned parts but luckily i had no issues at all. Easy assembling with the instructions, took me about 45 mins to put together, some steps in the instructions were a little confusing bit not to where i gave up. Platten is nice,thick and adjustable , has a centering lines which is good. Has a nice heaviness to it so it doesn't move when lifting the screen away. Some things i would didn't like is 1 the way the platten sits on the bar. Instead of 6 screws holding it in place. The more you press your things the screws may come loose and have to tighten them to keep the platten in place. 2 Also with the same bulky screws sticking out and bar underneath i didn't like having to stretch the shirt more to not have to shirt catch onto the screws and bar when putting on a shirt. 3rd thing is they don't have any platten for sleeves or youth shirts for purchase for this machine so you are stuck with the large platten. Other than those it works for now.

Easy to set up. Comes with everything that you need to get started.

Parfait 👍

This thing is a life saver. It is well made and easy to use!

This machine is a great entry point into t-shirt based screen printing. Having used this device for nearly a year now there are small aspects which I had to learn to work with, but overall the exceptional gains this provides versus trying to do t-shirt prints by hand is unbelievable. The small investment into this machine versus the significant time and stress savings of trying to screen print without this tool makes it a no-brainer.

Easy to install and seems like a decent machine. The major problem is that the bottom of the metal part that holds the screen (where the threaded screen holders are) is out of square. So, when a screen is in there, it lifts off of the platen by .5" (approximately) at the far end of the screen. Unless we cut a wedge to insert under the screen where the clamps hold it down to fix the angle, or bring it to a metal shop to have it bent into square, we will not be able to use the machine. Reaching out to Vevor on the chance that they might be able to help.

Nothing to complain about other than the included tools, but that is pretty minor. There is tons of adjustment, which is a must before your first use, but not a big deal if you are prepared for it. Note, that it will only work with adult shirts in its shipped configuration. You will need to make your own platen for kids shirts.