LET'S RESIN 1/2 Gallon Casting Epoxy Resin,Bubble Free & Crystal Clear Epoxy Kit,2 Part Resin and Hardener for Jewelry Making,Crafts,Art

I’ve used several resins, this brand and their products are by far the best and easiest to use! Love them! The smell is mild and Mixing is easy , bubbles are small and easily become stabilized creating beautiful quality pieces! The value is great I often see it on sale, and it comes with so much extra. Will buy and buy again!

I recently used Lets Resin Crystal Clear Epoxy Resin for a DIY project, and I’m very impressed. The resin mixes easily and cures to a perfectly clear, glossy finish without any bubbles when handled carefully. It has a good working time, giving me enough flexibility to pour, spread, and embed items. The final result looks professional and durable, and it’s easy to sand or polish if needed. Overall, it’s a high-quality, reliable epoxy resin that’s perfect for crafts, jewelry, and other creative projects.

I'm still fairly new at using epoxy resin, but the minute I start using this resin I knew it was better quality. Easy to mix, easy to remove bubbles, clearer that others I've tried, I'll continue to buy Let's Resin. I also like their molds as well, top quality. Also, the resin dries quicker without annoying failures like wet spots.

I’ve purchased multiple molds from Let’s Resin before but haven’t tried their actual resin until now. I’ve been using resin for about five years so I consider myself a relatively seasoned resin-er. I also sell my resin products so it’s very important and crucial to me that these projects come out as flawless as possible. So when I tried this resin out, I was pretty surprised that it had relatively low bubbles compared to other brands I’ve tried and very clear. Both of those things impressed me. It’s a little bit thinner than what I’m used to working with but it suspends glitter pretty well and I did not have an issue with it sinking and separating like I was anticipating. It does have a stronger smell but it’s not bad. (Always use ppe!) Onto the downsides… you will need a warmer room for it to cure than with other brands. I typically work in a 72-75 degree space and keep the humidity low. I’m used to doing a pour around 7/8pm and then being able to demold about 12 hours later when I wake up for the day and the project is set. I could NOT do this with this resin. This resin was still floppy and bendy after waking up and it was impressionable. I left it in the mold and applied it to a heat mat for about six more hours. Then I could demold and left it on the heat mat for another couple of hours. I did multiple projects just to check to see if that was the norm and it was. My first project was poured at 8pm and felt solid around 5pm the next day, almost 24 hours later. The next project was also poured at 8pm but was not cured and unbendable until about 8pm the following day. The third try was the same. I was very worried that these projects would not set fully. But, now I know it just takes a bit longer and needs a warmer environment. Overall, I WILL be using this brand again. Even though the cure time is longer, the price is lower than other brands I’ve seen and my projects have come out more clear with less bubbles than most of my other projects. I don’t need to go in and try to pop air bubbles anymore. It’s almost “set it and forget it” quality. I’m unsure about yellowing at this point or scratch resistance but I’ll update when I do know.

Very few bubbles, it really is a great product.

I am beyond impressed with this resin. After dealing with other brands that never performed the way they claimed, Let’s RESIN completely restored my confidence and my motivation to craft again. My project came out crystal clear, bubble‑free, and the dry time was unbelievably fast. I’m a very happy customer and already excited to start my next project with Let’s Resin.

Very good resin, not a lot of bubbles and no strong oder. Sets up to a hard finish. I cure mine in a crock pot on low. 4hrs and done.

Did 2 small projects. One turned out great and the other no so much. The one that failed was a project, 1/8" thick x 14" diameter, did not cure in places along the edges. The one that came out was similar but it took 3 days to cure fully. Used a small mixer head on slow speed to mix for about 4 minutes on both projects. Live in the US southwest so I do not know if the lack of humidity affected the curing. I have used another manufacturers project without issue.

Original.

Das Epoxidharz lässt sich m. E. super verarbeiten. Ich bin Anfängerin, probiere mich noch aus (wie man an den Blasen in einigen meiner fertigen Ergebnisse sehen kann). Ich werde dieses Harz jetzt ein 3. mal bestellen...1,5 Gallonen für knapp 100 € sind im Vergleich zu einigen anderen Angeboten zwar überdurchschnittlich teuer, aber ich traue mich nicht: es gibt viele Rezensionen mit unendlich vielen Erfahrungsberichten (mit Bildern und Begründungen), die mich verunsichern. Mit diesem Produkt komme ich gut zurecht. Der Versand ist auch topp: super-schnell, das Harz kommt gut verpackt und ohne Beschädigungen an (scheint längst nicht bei allen Herstellern selbstverständlich zu sein).

One of my fav resin...thanks for the fast delivery ♥️

2nd purchase for this resin, very little bubbles. Really easy to mix with pigment powders or paste.

Excellent resin I am unable to buy direct from your UK or USA sites as not in either of those countries. I wish you would list more on Amazon as its the only place I can buy from.