VEVOR Pottery Wheel, 10IN LCD Touch Screen Pottery Wheel Forming Machine, 350W Electric DIY Clay Sculpting Tools with Foot Pedal, Detachable ABS Basin for Adults and Beginners Art Craft

I am a beginning student and my class is only once a week. I purchased this to get some much needed practice time in on the wheel, and after using it three times, it is impressive for a novice. Yes, I do aspire to someday be able to purchase a 2k wheel, but as my instructor indicated, you have to learn to drive a stick shift before you graduate to a turbo. The most challenging thing about this wheel is that it is small, without adjustable legs, and finding a comfortable position to throw is still a work in progress. Right now it is on my coffee table in front of the couch, but I do have plans to design a table, and have purchased an antique stool to hopefully make this all work out. This being said, it does come with " stumpy legs" so it should not be difficult to find a substitution. There were comments that the tray did not fit well. I practiced taking the table apart several times before throwing, and yes, it takes a good deal of force to get the tray put together and requires a very tight alignment. I was surprised to see the bats included with the wheel and have used them several times. They may not last forever, but work very well for now. The wheel is smooth and the speed adjusts readily, currently using the manual "stick shift." This was an affordable purchase and I am thrilled that I have the potential to use this for a long enough to justify trying to throw pottery.

When ancient wheels were being sold for $350 in my area, I had to take a chance on this. I am definitely not disappointed! As others have mentioned, it is very short, so you will have to prop it up. I used 2 cinder blocks and it was perfect. I could put my feet on the cinder blocks to gain leverage and it was super comfortable. I made sure it was absolutely level before starting and I was able to center easier than ever. I am so happy with it! I had not tried throwing anything over 2 lbs yet, but I definitely think this will easily feet my needs. To clarify, I have the 450w lcd model that I picked up for under 100 bucks. Amazing! It comes with so many tools! Are they quality? No, but they get the job done and it’s everything you need to get started. What surprised me the most is that it came with 4 bats and bat pins!!! After reading many reviews, I was under the impression that I had to get my own bats and bat pins. However, there are 3 pin holes in the bats and I’m not sure if that’s standard. I hope I can buy more. For being more than 10 times cheaper than professional wheels, just get it! These are pieces I threw right after setting it up. I used the Rocky Mountain box clay also sold her on Amazon. 100% recommend!

I purchased this over a year ago to use for art fairs, but didn't get it unpacked until now! It's perfectly suitable for transporting to art fairs and shows if you want to do demo's. You don't have to lug the big wheel with you. It has 3 drawbacks. One is it will not go slow enough when throwing finishing touches like stripping out a slight foot, cutting off a top, or cutting work off the wheel. I don't think you can throw super huge pots on it because it just doesn't have the weight or power to handle much more than 5-8 lbs of clay. You might be able to throw off the hump with about 10lbs of clay, just centering the clay at the top. Two, no batt pins, but that is not really an option for the price, I wouldn't expect it. It would need small plaster batts if you are going to use them for throwing. The other issue is the machining of the wheel head itself. Although smooth, the grooves in it are difficult to clean if you have any kind of fine grog in your clay. It also wears on the hands a bit, you can really feel that grog going round, but doesn't interfere with throwing. The wheel head is very lightweight, I wouldn't risk metal tools on it, it feels very much like a cheap wheel I had years ago and the head was damaged easily. Pros: Runs smooth, no shakes or wobble in the wheel head. Make sure it's set level! After I ordered it, they came out with the floor model, but propped up on 4x4 blocks, it still works fine. Sealed metal cabinet is nice, everything under it is safe from water. Switch however will get water in it if you don't use the splash pan. Foot control/hand control stays where you set it. Compact and easily transported with out a huge mess except rinsing out the pan. Keep in mind it is a beginner wheel and for that it is, worth the price, but there are some things you need to do when setting up as a beginner: 1. Set it to a height using heavy blocks of wood under the feet if you plan to sit at it and throw. For table use, you will have to find a table heavy enough and sturdy enough to set it on so it does not wobble AT ALL! Make sure you dedicate a stool or chair you plan to use all the time for sitting. Place your wheel in an area where you can leave it up once set up or you will have to do the next step every time you move it. 2. LEVEL your wheel with a short level placed on the wheel, not the splash pan or the housing, on the wheel head. You want to do this a minimum of three directions and it must be level on all three. Usually if you get two, the other will fall into place. Turn the feet all the way in before doing this, then turn out to raise the direction that it sits low. One of the reasons beginners struggle to center clay and end up with crooked pots is because they don't do this. 3. The tools included are cheap pine and do not have clean smooth edges. Finish the edges with sandpaper. If the wood tool has a straight edge, sand it on a flat surface. All of these tools will rot if left in the water. All of the metal ones will rust. The metal throwing rib is not made well and too stiff. Buy a spring metal one. The wire tool will break with use, always have a spare. Buy a natural sponge as the one included is synthetic and is too big to keep in your hand when throwing or finishing. 4. Have a smooth board or table nearby to place your finished stuff on. The splash pan is divided into sections for tools with no flat surface. 5. Use a medium amount of clay, about 2 lbs. Don't go too small or too big. 6. Speed: This wheel has a suitable high speed for centering and slow speed for pulling up walls. It however does NOT have the lowest speed needed for some things normally done on the wheel. You can compensate for this with time as you get better at throwing, but you will lose some pots. 7. Watch a lot of video's on how to throw clay and all the other things you need to set up a basic studio. You don't need anything other than a few basic tools, the Kemper set with one metal rib is nice and a natural silk sponge or natural elephant ear sponge. Then expect to practice for months to start getting better. Fast isn't better when centering. You need speed, but you shouldn't have to splatter water and clay far and wide! (That will happen though!) As a student in studio, it takes about a year of throwing for 2-3 hours per day to become good enough to get about a 80% return of good pots in a variety of items. It takes 3-4 years of working 4 to 12 hours a day, every single day to learn every technique from throwing anything to glaze formulation and have every pot go in the kiln. In other words, stick with it, and practice every day. Pick one thing to make, like mugs. Then make them until you get 6 the same size and shape. Then move on to bowls, same way, then plates. There are plenty of videos to watch and the japanese throwers are especially good. Hsinchuen Lin has detailed videos on youtube here is a link to the very first things you should learn: https://www.youtube.com/watch?v=vj6Kd8RSmVY&list=PL7ACFB372AE5CF96D He throws right hand is dominant hand. Plan on purchasing at least 50 lbs of wet clay and some dry ball clay to recycle your too wet clay. Once you get good enough that this wheel is causing issues for you and throwing becomes frustrating because it isn't performing the way you want, won't handle the amount of clay you want to throw, then move up to a basic professional model with more weight and power. If you are bogging the wheel down trying to throw a big pot, then it's time! If you are throwing mugs and small dishes, you could use this for many years.

I have to hand it to Vevor, I did NOT expect this level of customer support for something like this. If I were to just rate the product that I received, it would not be 5 stars. It had multiple issues, all of which got addressed by the support team sending me what I needed to fix them. Is it ideal? No. But this is a really cheap wheel! I bought it knowing that I'll have to invest some time to make it work for me. It had the high low-speed issue as other reviewers have mentioned. I know a little bit about electronics and was going to try adding a dimmer somewhere to fix it. But thought I'd reach out to them before I do that in case they have any suggestions. And to my surprise, they sent me the entire updated control panel which starts at the low speed of 5 (as opposed to 60 in the original panel). They also sent me a replacement belt that fixed a little bit of wobbling at high speed and new pins since one was the wrong size in the original package. Again, not ideal, especially since there were no instructions for any of these, but I'll take it any day for this price. Took me a bunch of email back and forth and a couple of hours to replace the parts, but now I have a fully functional throwing wheel at a much lower cost compared to other options.

Es una máquina estupenda , Fácil de manejar. Tiene absolutamente, todo lo necesario para practicar la alfarería. Un gran acierto.

Arrivé rapidement sans dommages Pas encore utilisé nous verrons dans le temps

Tut was er soll-z.Z.zufrieden

Tornio entry level adatto a chi vuole capire se la ceramica può diventare una vera passione o rimanere un hobby occasionale. Rapporto qualità/prezzo: per il costo direi che vale la spesa, pur non essendo un tornio professionale. Permette comunque di togliersi qualche soddisfazione. Aspetti positivi: la vaschetta è smontabile e facilita molto la pulizia. Il tornio è silenzioso e il piatto è leggermente più grande rispetto ad altri modelli simili. Limiti da considerare: il piatto non è robustissimo come sembra (lo spessore non è reale, vedi foto) e la ruota interna collegata al motore è in plastica e non perfettamente centrata, anche se durante l’uso il piatto sembra non risentirne. Resta da valutare la durata nel tempo. Nota pratica: va rialzato (a meno di lavorare seduti a terra), quindi è bene tenerlo in considerazione prima dell’acquisto. In sintesi: consigliato per principianti consapevoli dei limiti, meno adatto a chi cerca un prodotto professionale.

Die Töpferscheibe ist der totale Hit, meine Tochter ist begeistert, größer und kompakter als erwartet.