Complete Electrics Wiring Harness Coil Stator Solenoid Relay CDI Spark Plug for 4 Wheelers Stroke ATV 50cc 70cc 90cc 110cc 125cc Go Kart Pit Quad Dirt Buggy Bike Parts

Worked like a charm and the 4 wheeler is back in operation. Good quality and after several months no issues to report. I would recommend this kit.

Works great! Used it to replace an old harness, For a 110cc atv. Follow the instructions in the pictures and verify all your connectins. Once I had everything installed I was getting no power to engage the starter. The issue I had was the wiring for the brake switch at the front of the harness. The atv that I have does not have a male electrical receptacle from the brake system so I had an unused conection from the harness. I thought this might be the problem and I was correct. I had to make a jumper to complete the electrical connect and the starter fired. My assumption is this is a safety feature to have a brake switch engaged to be able to provide power to the starter.

Perfect for 110cc tao tao and like model from 49cc and up!! Easy install almost plug and play on all models but straight forward enough.

Great

I was using this to replace the harness on a small kids Chinese ATV 110. The stator fit fine, but the pulse coil lead was about 1/4" short. When mounted it was really pulling on the lead. The overall harness is very cheap and about 4" to short in a few places. The original harness had heavier gauge wire of much better quality. The ignition switch was defective, it would turn the power off and on ,but the engine kill in the off position was not working. I had to open the ignition switch and found a bent contact for the kill switch. Repaired the bend in the contact and it worked. I checked every wire before connecting it to make sure I was not going to short anything out. Many wires were connected incorrectly in the harness that needed to be fixed. I had to take all the tape and loom off the harness to trace all wires. This harness does not come with the starter wire that goes from the starter to the starter Relay/Solenoid. The handlebar switch was wired incorrectly at the plug. I had to remove the pins in the plug to match up the pins of their harness. I would not recommend this kit.