JONSBO TK-1 White Micro ATX Mini Tower Computer CASE, Hyperboloid Glass Design, Separated Cabinet Structure, Al Alloy Shell Matx Desktop PC Case, Support ATX Power supply/240 AIO, White

I purchased the Jonsbo TK-0. This ITX case is beautiful and quite functional without taking up too much room on your desk. The secondary compartment for power supply, extra drives, and wiring is perfect for organizing your cabling and easily connecting all your parts. The build quality of the case is excellent, with my only gripe being the tiny and mediocre quality screws provided to screw in the glass and the PSU side panel. I would recommend being very gentle with them to avoid stripping. The top panel is a simple in design but fantastic in form and function, and even has silicone protectors to keep everything tight and vibration-free when it’s put together. There are some things to consider with this case. Unfortunately, you cannot fit even a 120mm AIO in the top of the case, due to the top fan sticking out about 1-2mm into the PSU compartment through a cutout, constraining the depth of fan—25mm thickness (the standard) is the maximum that would fit. Watch out because some TUF and other fans are actually 28mm thick, and will not fit. The rear fans are a dual 90-92mm pair, which align perfectly to the other parts in the case. A 120mm fan will not work there. I personally used a very nice pair of Silverstone 92mm ARGB fans that worked great. The graphics card slot (which, I’m still waiting to receive my card from Amazon, so I will update once I get that) accommodates a 2.5 slot thick card, which should work with most smaller dual fan graphics cards. Very importantly, keep in mind that the best cool air intake location is at the bottom of the case, and unfortunately, if my measurements are correct, only a 15mm thick specialty fan will fit. Once I get my graphics card I will update this. The case does come with mesh dust screens—one is built into the PSU side panel, while one is magnetic on the bottom of the case. Keep in mind that you CAN change the location of the feet and the case orientation, which changes the air flow pattern. Overall, this case is amazing so far, easy to work inside, and is definitely worth the price. If you want a beautiful case that you can display on your desk without taking up a ton of room, I cannot recommend this one enough!

Beautiful, spacious case with everything I could have wanted. Everything fit in perfectly; it was simple to put together (even for a first-time builder!) and I was pleasantly surprised to see a space for an additional hard drive (or whatever else you want) in the back. The glass is stunning and I love that it’s got curved corners because I’m not a fan of the fact that a majority of cases right now are all about looking like a sharp-angled rectangular prism. Airflow is like a dream. I’ve got a rather large fan in there and it works fine, but I’m sure an AIO would leave plenty more space. I am so happy with this unique and sturdy case. I’ve had no issues with dust (had it for over a year and I check now and again with an air duster). The color of the case is still as bright as when I got it and I love the power button both aesthetically and in terms of tactile detail. Great product for a reasonable price.

Its stunning in person, love the curved glass and its very strong. I would def recommend this case to anyone looking

This little case is super well built. The comments about the screws being low quality are either dated or someone is using way too much force. I put the entire thing together and took it apart again because I added in extra fans. The screws held up totally fine and as expected. it also came with a bunch of extra screws. This case is TINY. I have built SFF PC's many times and the TK-0 takes the cake as the most compact but intelligent design. PLENTY of space for cable management. I added a Jonsbo cr-1400 dv2 cooler (hard to find at the time of ordering) but it looks great and works well for a 265k. You will definitely want to utilize maximum amount of fans in the case if running any serious loads. Also, follow all compatibility requirements because it will NOT give you 1 extra MM of space on any of the specs. I used an Asus 4070 super EVO and that barely had a little wiggle room at 227mm of the 230mm spec. Build Quality: 9/10 Ease of use: 7/10 (wish I could take the glass / back panel off without taking out screws) Looks & Personality: 10/10 Recommended: 10/10 (so long as you realize you're building a SMALL form factor pc)

I wanted a desktop case that would easily sit on my desk and not take up too much space... This is it! You will be limited by space, check your Graphics Card's dimentions before buying it, also you cant fit any AIO cooler other than a 240mm, either bottom or top. Be mindful about the space between your Mobo and the AIO (if you choose water cooled) and also need to observe the space for your CPU power cable fitting between the case and the top of the Mobo itself. I got everything to fit but make sure your cables will bend and fit exactly how you want. The case itself it top quality. The curved glass is an absolute show stopper. The metal shell is thick, I had no worries about it bending at any point during the build. Tip: I recommend using M.2 memory sticks on the Mobo and taking out the SSD/HDD structure in back above the PSU, this made more space for cable management. See Wiring pics. Parts used: Ryzen 9 5950X, Asus Prime B550M-A wifi II, Sama white 750w power supply, trident royal 32gb CL16 3600Mhz, Crucial P310 2TB M.2 stick, Arctic M2 pro heat sink, MSI 5060 Ti 16gb Ventus 2X OC White, Cooler Master 240 Atmos White CPU Liquid Cooler, ASUS Tuf Gaming TR 120 x4, (2 reverse, 2 replacing the Cooler Master AIO fans), GPU & 24-Pin AsiaHorse RGB extension cables, Thermalright RGB hub.

Excelente case! Totalmente compatible con mi MSI B650M Project Zero, ya que tiene sus conexiones traseras. Excelente acabado y muy cool cristal curvo!!

This case is honestly incredible. It's a bit challenging to get all the cables in there as it is a tiny case, but it is so worth it. Super pretty and well made and the seller was great. My PC is a work in progress so it may not look the best right now, but imagine all the potential!!

Looks really good and is sturdy, well made. I bought three cases until I was finally happy with this one. It is quite heavy as a result but better than some flimsy one

Beautiful case with a nice finish. Only negative for me is the fit of the glass to the case. No point on having screens on every fan opening if there's a 1/8-1/4 inch gap between the glass and case.

Good to build in, I managed 2x 360 rads both in push/pull so happy.