3PC 8 Inch Polishing Buffing Wheel Kit for Bench Grinder, with Each 1PC Sisal/Denim and Cotton Wheel with 1/2 Inch Thickness and 5/8 Inch Arbor Hole, for Polishing Stainless Steel/Aluminum/Brass

Here are a couple of pictures of the exhaust on my motorcycle that I polished with this kit. Previous owner had gone at it with a scotch brite pad to get a satin look. I took it off, wet sanded with 600 grit and again with 1500 grit, then used these wheels and polishing compounds provided and got a great result.

I tried these out on my 3450 RPM bench grinder. They for the most part worked as expected, except the sisal wheel continuously shredded and sent fibers flying without me touching anything to it. It didn't really take the polishing compound either. It just sort of flung it.

I needed to cleanup and polish a box full of metal collectables and this was just the ticket. Installed on my 8" bench grinder, and used in the correct order, they produced stunning results. These are narrow enough to get into tight places but still work well on larger surfaces. The polishing compounds worked very well and I wish I had more because I'll be using these a lot.

These are well-made and made to last. Very tight sewing and firm cloth on the wheels. Good for 'hard' buffing and fast removal of scratches. Best mounted on a buffing machine, but will work on your bench grinder too. Just be careful of the wheel guards on the grinder so you don't get them caught between the wheel and the part you are buffing. The cloth on the wheels is very tightly compressed when sewn, so the wheels are very hard. Use with care on delicate parts. The three bars of buffing compound are great. It's best not to mix them on the wheels, however, for best results. Use one color per wheel. Use the white on the loosest wheel for final buffing. And contrary to what some people demonstrate, it's not necessary or desirable to hold the grit bar against the wheel while buffing. That wastes too much compound. Just brush it firmly on the wheel for a few seconds, and then remove it and buff. Press the bar against the wheel occasionally as the compound rubs off as you buff. The wax in the bar keeps the compound sticking to the wheel.

Nice package - 3 quality polishing wheels in sisal, denim, and cotton, with appropriate compounds. So often a polishing job comes up fast; no time to forecast the need. Having this set of wheels on hand enables the craftsman to be prepared for the inevitable need to polish. Perfect for my workshop. Will try to update this review when I do a polishing job with them.

Around $25 for 3 very well constructed wheels and 3 bars of compound is a good value. The ones that I received are well balanced. The stitching is well done. They seem durable, like they will last a long time. Everything works great! I would order these again if they ever wear out.

This set is primarily made for buffing stainless to a near mirror finish. Has 3 different compounds, and 3 wheels from course to fine, combined with the compound, you can buff stainless in a short amount of time. Great reasonably priced 8" set. 5 🌟

This is a good price for a three stage, six piece stainless steel polishing kit for 8” bench grinders. I’m pretty new to knife making and metal work in general so I wasn’t aware there were polishing wheels and compounds made specifically for stainless steel and this seemed like a good addition to my tools and accessories collection. So far, I’ve dealt only with polishing higher carbon blades and softer handle and pin materials but I look forward to trying this out on any higher chromium content blades I have that might need a touch up. Again, I’m no expert yet but the 8” general purpose polishing wheels and compounds that I’ve already purchased seem a little better made and the compound blocks have a little higher quantity for around the same price so I’m deducting a star based on that initial comparison to these similar products. That said, once I get a chance to try out the actual performance on the intended materials, I’ll update my review…for now this gets a solid four stars from me, based on what I’ve seen so far.

Produit mal identifié en ce qui concerne le grain des pâtes à polir. La roue en sisal est vraiment de piètre qualité, simplement à jeter à la poubelle. Pour les autres roues et les pâtes c'est passable.

The medium (denim) wheel started to fall apart after a very short time on my buffer. The other wheels have been holding up well and the polishing compound is doing a good job.