Perlegear UL-Listed Full Motion TV Wall Mount for 42–90 Inch TVs up to 150 lbs, Pre-Assembled TV Mount with Tool-Free Tilt, Swivel, Extension, Max VESA 600 x 400mm, 12″/16″/18″/24″ Wood Studs, PGLF16

Came with all the hardware for easy installation. Very sturdy and no problem holding an older 70 inch TV. I would trust this with a bigger 90 inch TV. It has a fine adjustment for tuning the horizontal so you can get your TV a perfectly level. Very important. I made sure when I installed this it was anchored into the wooden studs. The instructions make it pretty clear that you can’t use this with drywall anchors.

This is a strong, well-built and well-designed TV wall mount. It adjusts in and out and side to side smoothly and makes it easy to fine-tune all the adjustments you may want to make for the best viewing position and angle. I’ve installed several wall mounts of lesser quality and price for TVs in other locations. This wall mount is superior in a heavier-gauge metal that appears less likely to sag or bend than these lesser wall mounts. I also appreciated that they included all of the heavy-duty hardware that is needed for any kind of installation. The template and level included made it easy to install the wall mount in the precise location where I wanted it. If you’re installing in a typical home drywall you will need a stud finder or some other method of determining the location of the wood studs behind the drywall. But the wall mount frame has plenty of holes to accommodate different spacing of studs. Once you determine the stud locations then it is an easy matter to use the template to place the wall mount where you want it. Probably the most difficult and time-consuming part for me was deciding the exact height on the wall where I wanted to mount the TV. Just a tip if you’re doing this without a helper as I did: find a large sheet of cardboard that you can cut to the size of your tv and then use masking tape to move it around on the wall until you determine your desired vertical and horizontal placement. Otherwise, enlist a couple of strong helpers to hold the tv and move it up and down and back and forth to find your desired placement. Once you have figured out exactly where you want your tv to be, the actual process of installing the wall mount on the wall, installing the mounting plate on the tv and then attaching the tv to the wall mount is a piece of cake.

Got this for an 85" and it is amazing. Very sturdy and easy to move with one hand so we don't need to push on the center of the TV like we did with out old one. Easy to hang, just use an actual level not the little one they provide. Will be replacing all of our wall mounts with this one.

Perfect and easy installation that worked well. The tilt adjustment was very useful to level it out with the included leveler.

Very impressed, well made, strong frame. Moves easily but also holds its position well. Install took about an hour. It’s a universal mount so it comes with a lot more hardware than is required. Highly recommend setup with two people. Overall extremely pleased with the quality for the money. Make sure your cords will be long enough to reach your devices and power source, the power cord is only a few feet long, I had to find a longer one from a local hardware store.

Very sturdy and durable! Easy to use and install over all good quality for the price!

This mount is nice. The 24" template makes it easy to center on the wall and to mark and drill. The pre-assembled swing out portion saves a lot of time and aggravation I'm sure. What I don't like is that an 85" TV is really too big and heavy for it. The mounting plate is secure to the wall but the swing out portion is not strong enough to hold it properly. No matter how tight you make the tilt adjustment you cannot get the screen to lay flat, it sags downward at about a 15% angle. It doesn't really affect the viewing that much, but it shouldn't do that. (see photo showing mild unwanted downward tilt). The instructions were clear for the most part but were a bit murky concerning after mount leveling. One instruction shows only 2 adjustment nuts but there are actually 4 that need to be loosened (shown properly on a different instruction sheet). In researching these TV mounts I found the best ones have an option for not only 16" on center (OC) studs but for 24"OC as well. That means the mounting plates are 24" wide and allow for easier centering on the wall if you have standard 16"OC studs as most homes do. The second thing I discovered is the weight of the mounts vary a great deal. This one and some others that are 24" weigh around 18-20m lbs but others I found in the same class (Mounting Dream and USX Mount for example ) weigh around 24 lbs. That's a huge difference (20%-25%) in steel content making those much sturdier and stable I imagine. I haven't decided whether I'll return it or live with the deficiency yet as it was just put up yesterday. No matter how easy they are its' still a big hassle to disassemble, exchange and remount, that I'll have to think about it. I have given mount this a 4 Star Rating based only on my experience with an 85" screen. Not sure of the results with a 75" but to be fair, I am sure that I would rate it 5 Star if I were mounting a 65" or smaller screen. Good luck with your adventure and I hope my comments are helpful to some. Thanks for reading.

Mountain perfectly on the wall. Its sturdy and does exactly what it says

Soporte muy rígido, lo usé para una TV de 100" y funcionó a la perfección. Incluye todo lo necesario para instalarse y la plantilla que trae para las perforaciones hace todo el proceso muy rápido. Fácil de armar, ninguna queja. No parece afectarle el peso de una televisión tan grande (aunque confirmé que esté por debajo del peso máximo que el fabricante recomienda).