TechOrbits Universal Desk Mount for Triple Monitor - Fits Three 13-30" Monitors with Swivel & Clamp

I needed something that would eliminate desktop stands to conserve desk space and this mount works perfectly. I mounted this to an Ikea work desk and it JUST barely fit, which made the installation look great! I mounted three 24" AOC curved, frameless, 144Hz gaming monitors to this and with some tweaking and tightening, was able to line them up perfectly and quite solidly. This is definitely not a plug n play mount, as there is a lot of tightening, wiggling, pulling, and twisting involved to get the alignment perfect (I'm a bit OCD in this regard) but I would expect that with any mount of this type, but once you get things aligned and tightened down, there is no sag, and no drooping over time. My three monitors are lock solidly in place and have not become unaligned, even a little, over the few months these have been in place. I have used non-pistoned, more mechanical, multi-monitor mounts in the past and this mount easily stands up to any of those in rigidity and offers a much higher level of customization as far as alignment goes. I would highly recommend this mount to anyone that demands alignment customization, has the understanding that this isn't a 10 minute setup product, and has the patience to spend some time tweaking, tightening, and adjusting to get that perfect fit. An easy 5 stars.

It’s fully adjustable you can tilt the monitor it works great and it is really sturdy due to the fact that you can adjust how sturdy you want it to be. It’s really easy to install and it fits the monitor perfectly the value for the money is great I would say because i bought it for 50 dollars so I can’t complain at all.

This supports my two 27" Samsung curved monitors and my one 28" Samsung flat monitor in the middle. The middle one is fairly heavy, but the outside two are reasonable. The mount could easily handle bigger, heavier monitors. his went together quickly and seems very sturdy so far. Adjustments are easy once you tune in the gas strut strength. It has a wide range of adjustment. I wish that the middle mount had more adjustment, and the adjustment for the tilt control strength/resistance was a little bit easier, but that was really just five minutes of slight struggle compared to many, hopefully, years of the mount behaving. I have so much more room on my desk and getting my monitors up higher has made me realize just how much I was slouching and getting that famous computer posture. I put this purchase off for a while, thinking it wouldn't be worth the money and I'd regret it or that this mount wasn't REALLY good enough. It's great and I'm thrilled and I haven't looked back.

Very nice, sturdy, and very sharp looking monitor stand mount! The only reason I didn't give it 5 stars is because I had some trouble steadying my 27" Dell U2710 monitor. I do not know the exact weight of the monitor but should range around the 17.02 lbs mark and that's with the stand it came with. The hinge on the Tech Orbits stand mount kept rotating forward because it couldn't support the weight. No matter how much I tried to tighten the hinge. Ultimately, I was forced to improvise (embarrassingly enough) and place a loose metal screw between the hinge to jam it/prop up the monitor and keep it from rotating forward. It's not obvious and nobody can see it unless they're looking for it but I know it's there... So yeah. My other monitors are 24" Dell monitors and the hinges weren't an issue with those after I tightened them up. However, the arms originally didn't want to stay up and there were really no instructions included on how to resolve this. I finally figured out that you have to manually tighten some knobs on the arms to improve the pressure and weight resistance. There should probably be more detailed instructions included with the packaging as I feel a less technical person would not be able to figure that out. Overall a great product and looks very nice in my home office. But, I may have to go ahead and find more lightweight monitors in the future.

It's 2025 and I've had this since 2018, honestly the best monitor mount I've owned. It's survived 3 moves, multiple monitors swapped out, and additional pieces added to the middle arm over time. 10/10 stand.

I bought this was a bit skeptic about its ability to hold 3 27" monitors due to some reviews. I am more than happy for buying this stand, so steady strong and holds my 3 27" Samsung monitors like a dream. There are no drops they hold position of every monitor the arms when tweaked and tightened to desired location they stick there, they have been on for the last 2 weeks with no drops or movement. HIGHLY RECOMMENDED for those who need such a gadget for there monitors.

My centre screen is a 27" LG Ultragear+, which is quite heavy. Screen on either side are 27" Dell. They all fit nicely, but I like a fair bit of an angle. The gut struts are a nice touch, very easy to move things around if needed. Easy to remove the monitors too with the VESA mounts having slots, good if you need to relocate it. Just don't forget about the gas struts when removing the monitor, without the weight they will go up ver quickly :)

Have been looking for a 3 monitor arm option for a while and finally decided on this one. Once I received the stand it took me about 20 min to setup and get all my monitors on it and aligned. Instructions were very clear and all part/tools needed were available in the box. I have 3 24" monitors and can see this supporting much larger ones as there is a lot of extra adjustment space being unused by my setup. Cable management is built into the arms and was easy to use. I have had no problems with it thus far. In the future, should I need another monitor arm for a different setup, I will be ordering more from this manufacturer.

I bought the silver TechOrbs 3 piece stand and it is VERY VERY good, but not perfect. It was decently easy to install, is very sturdy (although there is some wobble, you can chaulk that up to physics and lever lengths, NOT poor build quality. It is easy to move the monitors around, with all angles of freedom... up down, left right, rotation, and tilt. And the monitors stay where you put them. HOWEVER The only thing I am disappointed in is the build quality of the cable management system. If there is ANY pressure from cables, the cheap plastic covers pop off. I've even been able to get it to work for like an hour, but then if I touch the monitor at all it is enough to have the covers pop off. As an overall experience, it's kinda like, if you ever have been to The Keg, where the service was great, and the steak was great, but the sides look and taste like No Name Brand from the frozen food aisle. Whereas, if you go to McDonalds, you know what you're going to get and so are not going to be disappointed. It's like, Im spending $179. I'll spend $189 or $199 for a cable management system that doesn't suck. I was able to solve the problem and make the solution pretty and creative by using neon cable ties to keep the cables in their tracks and eliminating pressure on the cheap plastic covers. So overall, these are a winning product. I am a big fan. However guys, if you are going to make something this good, just go all the way. Thanks!

I am very happy with the mount. It is very sturdy and well built, works well and looks good. They don't note in the description that it does have cable management in the arms to hide your cords. Amazing customer serivce. I lost a piece due to my own idiocy (accidentally sent a mounting pate when I returned a defective monitor) and they are sending me a new one at no cost as a courtesy! Highly recommended!!!!!!!!!! Will likely buy another for my wife's home office.