UL Listed COB LED Strip Light 4000K Natural White 16.4FT 480LED/m

These LED light strips were an improvement to the light strips. I’ve been running for the past 10 years that slowly started to burn out. Installation was easy and they produce a nice consistent light. My only wish was that stringing them together past the recommended length would maintain a more consistent lighting level. This is beyond what the power supply is able to deliver and would really require power from each end of the string, which I am not able to achieve in this installation.

These are great for under cabinet lighting or closets, pantries, garage workbench. They are very bright and the 4000k temperature is very white. I would recommend these for anyone needing low voltage lights. The adhesive is also very good and these work with the 8mm connectors I have. One warning, you have to shave off the rubber bubble over the cob light tract like 1/8th of an inch at the end to them to better fit into the 8mm connector. I bought several for future needs.

What can I say, this stuff is great! I have done a little bit of LED lighting in the past and while it is a cool somewhat newer lighting tech for the most part, it has visual limitations, such as noticeable spots. Often times that meant for indirect lighting where you didn’t see the strip worked best. You couldn’t really look LED the strips without noticing the individual lights. Sometimes people used diffusers to help with this issue. That’s where this is so much different. I’m not sure exactly how they’ve pulled this off because I’m pretty sure they’re still individual LEDs in there, but it looks basically like one solid line of light which can be really nice at distributing a more even spread of light and even placing it in locations where you can see it directly. My first use of these strips was to put lighting in my tool trailer. I needed something low profile, low power consumption, easy to install and fairly bright. This stuff did the trick and I can’t tell you how excited I am to use my tool trailer with a reasonable amount of working light. For separated sections of this strip light I used COB LED strip to wire connectors also found here on Amazon. They basically just pressure crimp onto the LED strip and to a small gauge wire for easy wiring set up. As of the time of my purchase, I don’t think anyone mentioned what kind of connector is on the end of the start of the spool. I recently bought an EcoFlow, Delta two smart battery for my tool trailer to run some small accessory lighting such as this, and some battery charging for tools. That came with a cable for DC connections, which has a DC5525 to DC5521 cable. I was able to plug one end in to the EcoFlow and the other in to the start of the strip light. So for reference it looks like this lighting strip will plug directly into a DC5521 cable. Overall, I feel pretty confident I will be purchasing more of this lighting to use in other lighting applications, potentially in my RV as well.

This is a great product. I installed one roll of this in my gun safe and another roll in a 19" equipment rack that I use for our homes network and entertainment system. Both cabinets had been frustratingly dark for years. I'd used the SMD strips before and while they were a good product too, in my opinion the COB blows them away. They are more flexible, making them easier to work with and install, and if it's where it can be seen it looks better. I'd always bought housings for the SMD's, to both even out the light and so they looked better if seen, but I didn't feel the need with these. The light seems more uniform with these. The IDC connectors that they show to use with the product are easy to use and very reliable. Why 4 stars instead of 5? I reel came with a connector on one en and wires attached on the other as stated in the information. The other one didn't. It looked like an open package was sent as new. That really wasn't an issue for me, but I don't like it when the product isn't exactly as described. I will however buy this again. All of our kitchen cabinets are about to be lit inside.

I used these Tunichx LED strips for under cabinet lighting in our utility room/office. The 4000K was the perfect color and these are actually brighter than double row strip lights that they replaced (and they use less power). Using crimp connectors with wires between cabinets made a nice installation.

So many uses! I cut mine into two sections and wrapped each half around a one gallon jug to grow phytoplankton as a food source for my reef aquarium. One side already had a 12v female plug and the other side already had the + / - wires, so I just had to attach a 12 v female plug. I used clear tape to hold the lights to the jugs with the lights facing inside, and the adhesive side facing out. This works better then a traditional single source light fixture in that it fully saturates light from all sides. It also stays very cool, and does no heat up the culture. Although not as important for my application, compared to other strip lights I have used this one is a solid contiguous light, not a string of dots. Looks much better in my opinion. It is also much brighter then other strip lights I have used in the past. Very happy with my purchase.

Doesn’t have a plug

Great quality, easy to install and looks really good

No adaptor,where do I buy one?