BASENOR 2024 2025 2026 Tesla Model 3 Highland Mud Flaps Splash Guards Fenders (Set of 4), No Drilling No Tape Mudflaps (Proprietary Design) All Weather Protector Mudguards for Model 3

All four splash guards went on easy as advertised - just pop out the original retention plugs, align the guards, pop the provided plugs back in and done. They fit snug to not flap around in the wind or cause any vibrations under high speeds. They material seems pliable enough with some give, but rigid enough to hold shape. As you can see from the pictures attached, the color matched nicely and the lines are clean. I love the low profile look - just enough to not kick up rocks.

I just installed these on my 2026 Tesla Model Y Juniper, and I love the fit and look. They feel very secure. The front splash guards are held by two pins and two metal clips (included), making them very secure. The rear splash guards are held by two pins, one plastic screw inside the wheel well, one metal screw on the bottom rear, and two metal clips. Everything fits into the original holes—no drilling needed. All tools are provided, along with two extra pins. If you’re like me and a bit hesitant to pry out plastic pins, it’s not that hard with the included pry tool. Once you remove the old pins, you use the new ones provided. Before inserting the new pins, you need to remove the pin from its socket. A combination of the included pry tool and a pair of long-nose pliers (not included) makes this easier (otherwise it’s a bit tricky). Push the socket into the existing holes first, then push the pin into place by hand. The metal clips that secure the splash guards to the plastic wheel cover have two sides: a flat side and a curved side. Insert the curved side toward the inside and the flat side toward the outside. The metal clip should be fully inserted so it securely locks the splash guard to the plastic wheel outline—if it slides out easily, it’s not properly secured. Once everything is in place, the fit is beautiful—just like OEM. Even the color matches the molding perfectly. Update: A few days after the installation, I drove off a high sidewalk and broke my front splash guards. I pulled backwards to save my rear ones. On the plus side, the front splash guards came off cleanly of the original holes. I purchased another set and had no issue installing the front splash guards into the original holes. It was totally a user error. I didn't hesitate to buy the second set.

The mud-flaps look fine on my 2023 RWD Model 3. They contour to the cars body nicely and the install was mostly okay. The front flaps attach to the car with the supplied pins with no real issues. The instructional video the sender refers you to is good but the screws don’t screw in, you just press them in which causes the back of the pins to expand holding them in place. Maybe you unscrew them if you ever need to remove them? However the clips just don’t work. There is no place on the car for them to clip onto. There is a very small metal lip they could conceivably attach to but it’s just too short to work. So I attached the front flaps with just the two base pins and the plastic lip at the top that does clip onto the short metal part of the car and hope that works okay. The rear flaps went on better and I think they are attached reasonably securely. However, you only use one of the supplied pins and the metal bolt underneath. You can’t attach the second button pin because the flap doesn’t overlap the hole in the car. But that one pin plus the bolt should be fine. I just re-used the bolt that came with the car. This will probably make more sense to those who’ve tried to install these! But they are installed, look good, and are reasonably secure without a lot of effort. Some people have mentioned having to drill or expand the holes to get them to fit but the holes lined up just fine for me. You do need to play with the positioning, but I found the holes lined up perfectly after maneuvering the flap a bit.

After trying a couple of generic options, I’m thrilled with the BASENOR 2026 New Version Mud Flaps for my Model X Plaid. These are designed specifically for the Tesla, so the fit is absolutely spot on. No weird gaps, no rubbing on the tires, and no drilling into the bodywork. They snap into the existing holes with the included hardware. The material is a thick, flexible composite that feels much more durable than the thin plastic “one size fits all” sets. I’ve already driven through rain, slush, and gravel since installing them and they’ve done a fantastic job keeping debris, road grime, and salt off the doors and rocker panels. They even cut down on the amount of spray that hits the side cameras. Installation took me about 20 minutes for all four wheels (they include clear instructions and extra clips). Once installed, they look like they came from the Tesla factory. This is a subtle matte black that blends right in with the trim rather than standing out. If you want to protect your Model X’s paint and keep your car looking clean longer, these BASENOR mud flaps are worth every penny. They’re inexpensive insurance against rock chips and road salt damage, and they look great too. Highly recommended for any Model X owner.

Perfect fit and alignment for 2023 Australian Model Y RWD No issues installing, only possible issue is no guide marks for rear clips, don't feel as secure as the front ones, might fall off eventually, but the rear flaps feel secure enough as there is a little tab/catch near the top and also the screw cover.

Fits like a glove. OEM quality and very easy to install. Protects your freshly washed tesla from the dirty water of a pothole or similar.

Install took around 20 minutes. Looks good, well made. I have other Basenor products and they are the same good quality

El producto es lo que el vendedor describe pero piense que debería ser más flexible se rompe muy fácilmente con terreno irregular ya van dos veces que lo compro y creo que necesito una tercera o de plano ya quitárselas

Bought this for my new Model Y Juniper. It's very well packed and has all the essential tools to get them fixed on the car. Quality is exceptional. It's hard plastic and shaped perfectly to fit the Model Y without requiring any additional holes. Clips right into the existing holes on the car. Highly recommended and avoid cheap substitutes.