– OVERTURE ASA Filament 1.75mm 1kg, Black ASA 3D Printer Filament 1kg (2.2 lbs) Cardboard Spool - Premium Anti-UV, Weather & Heat Resistance Perfect for Outdoor Functional Parts, Fit Most FDM Printers

Nice quality material. Prints well and has survived outdoor use for one British summer so far.

I've started to use ASA for functional prints and so far Overture hasn't let me down. I'm using this with a Bambu H2D so have my chamber set to a nice and toasty 55°C. Prints are coming out solid with no warping. I'll be being more Overture ASA filament in the future.

Perfect!!

This is great. I've mostly used it for skirts and other uninteresting parts of my Vorons and it's printed really well without warping or lifting off the bed. This had been an issue previously. This particular filament is a really nice medium gloss black with consistent shine across the part, there's no extra shiny parts where the toolhead is moving more slowly. It's really neatly wound on the spool. I'm using G10 and PVP to print on, everything sticks to it and this is no exception. I've not needed to try PEI but previous overture spools have stuck a little too well. Price is really good.

The filament itself is great, but the winding onto the spool was such that I needed to stop printing and un-jam the filament which kept pulling itself into tight loops several times. Hoping this was a one off on this spool as otherwise the filament prints well with very little odour for ASA. Also found better results using the upper end of the suggested bed and nozzle temperatures, but clearly that will be printer dependent. Used on an Anycubic Kobra S1, with good results.

Picked this up to replace some awful ABS from another brand. Absolutely great. Reel looks well wound, prints very cleanly, no adhesion problems. With minimal tuning for flow rate I'm getting great results (100 bed, 250 print temp). I've used Overture products before and I'm happy to say that this meets their standards. The colour is very consistent from spool to print, though I would say it's not as "bright" as the product page suggests. A darker, flatter, shade of green. See photo for reference. Works well for printing out a christmas wreath.

Good filament, prints well and low odours from watching first layer. Unfortunately, my first proper print after calibration failed overnight, due to a tangle. I had thought this was my fault so i respooled the filament, discovering 6 tangles deep in the entire spool. I've now got 4 spools of this filament that i can't trust and have to respool them all. Maybe i just got unlucky but quite annoying.

I bought this and two other vendors' white reels to replace a reel of Prusa White ABS that was about to run out. The Amazon Basic White ABS was too yellowy and the Likesilk ABS was much whiter with a blueish tint. Thankfully the overture ABS was a great colour match and a great price. I particularly like the cardboard reels for ease of recycling. I shall be buying more!

Filamento de buena calidad. Tengo problemas con las retracciones y pensábamos que era el filamento pero nos hemos dado cuenta que es un problema en la disipación irregular de la temperatura de la cama. Seguiremos confiando nuestros trabajos a Overture ya que los filamentos son de muy buena calidad.

Ich habe schon mehr als 10 Rollen des ASA Filament ohne Probleme verdruckt. Das Druck Ergebnis ist sehr sauber. Den Preis finde ich auch top☺️👍🏼

The print quality is excellent—very fine detail and strong results. Unfortunately, both filament spools I used suffered from tangling, which led to print failures and printer issues. Since this happened with both filaments, it doesn’t seem like an isolated incident.

وصلني متضرر من الشحن كانه طايح او مرمي

I use this with my PRUSA Mk 3S and absolutely love the way this material prints. I use it with the built in settings for prusament PETG settings, the only change I make is to increase retraction speed to 1.4 to avoid getting the fuzzies and it works like a charm. Be mindful of first layer adhesion once I get the first few layers down I can pretty much walk away from it. I use a standard Elmers glue stick which seems to work just fine. Word of Caution though, the filament comes with built surface sheets, when I tried using one, the one part stuck so bad to it that I had to literally cut the sheet away to get the part off then sand off the remaining sheet from the bottom of the part. Probably my fault as I thought these could be used without any glue prep. So I won't take any stars away. If I have any complaints at all, it's only one of aesthetics, that the black filament has such a high gloss to it, it makes photographing nearly impossible. I would've preferred a more matte finish. But I would definitely recommend this filament and and will purchase it again.