Tempered Glass Screen Protector [GlasTR EZ Fit] Designed for iPad Pro 13 inch M5 (2025) | iPad Pro 13 inch M4 (2024) [9H Hardness/Case-Friendly]

I have been using Spigen cases / screen protectors since iPhone X. They are of high quality and cost less than the competition. For these new versions, they provide an installation kit and make it trivial to install. I did not get any bubbles on my screen. They include 2 protectors in case one breaks, but I just used the second one on another phone. It fits so well that you can’t even see that there is a protector on it, or feel it when touching the screen. It did crack after 1 year of usage. But it did what it was supposed to - protected the iPhone. I will get a new one.

Perfectly clear screen, I forget half the time that it’s on there It plays really well with my case (that is also from Spigen, of course) and fits, the screen seamlessly and other cases that I have tried. Extremely easy to clean and does not change color. Feels very good to use with both my finger andmy Apple Pencil. It glides smoothly and taps don’t feel like it will break it. Needless to say, it does not feel fragile at all. Functions just as advertised. With the installation guide, application was extremely smooth and thoughtless, taking all the work out of alignment you would normally have to do yourself. Any bubbles were easy to remove if they did not remove themselves.

I recently upgraded to an M5 iPad Pro from an M2, for which I had bought a similar Spigen screen protector. What I liked about the one I had on that older iPad applies equally to this one: -easy to install, especially the ease of alignment -no bubbles, or it’s easy to get rid of them -easier to clean and more fingerprint resistant than the bare screen -no increase in glare -no interference with the picture quality of the screen Spigen is my preferred brand for device protection: cases, screen protectors, etc. They usually find the right balance between protection and usability.

I upgraded my iPad Pro 12.9 to the just released iPad Pro 13 M4. I preordered the iPad Pro 13 M4, as soon as it was announced. I wanted to protect the screen with a tempered glass screen protector immediately after receiving my iPad on the day that Apple officially released it (May 15th). Surprisingly Spigen already had a tempered glass screen protector available (May 8th). I ordered it even though it is more expensive than others as Spigen is a well known brand. This was the easiest screen protector to install ever. The plastic guide that came with it made it stress free. No dust, no bubbles and perfectly centered on the first try. Wow! High quality tempered glass screen protector, designed to fit perfectly. Highly recommended! Just get this one!

This screen “protector” is a POS. First of all, the QR code on the package takes you to instructions that do NOT match the product, making the first impression bad and confusing. So instead I carefully studied the visual instructions included in the box. These were diagrams only with few words supporting the images. After going over them and feeling confident to move ahead with the installation, I proceeded. The cleaning wipes and dust removers worked fine to prep the screen, BUT THEN came the actual installation of the cover. One I removed the film backing, I very carefully, under bright lights, lined up the plastic frame to lower it onto the iPad screen. I pride myself on precision and care and I was extraordinarily careful to scan the perimeter of the iPad screen to match it up with the plastic installation frame before lowering it in a level fashion as the instructions called out. Once lowered, the plastic frame fit snugly all around the iPad screen. I thought all was well - it was not. I went thru the other adhesion steps and then lifted the plastic frame up, only to discover there was an 1/8” GAP all across the top. HOW DOES THAT HAPPEN???? The fame fit exactly around the screen. I was VERY UNHAPPY, but proceeded to wipe the air bubbles off. Then came the part about putting the iPad back in its case. This was A CATASTROPHE. Because the protector was now somehow misaligned, it was very difficult to get the iPad back into the case. It caused massive bubbles to appear. I tried to use a very thin staple remover tool to gently pry the perimeter of the case over the screen. Despite my care, this resulted in the screen protector cracking and becoming COMPLETELY USELESS - I THREW IT OUT. Finances are tight, and I very much resent wasting my money and time on this GARBAGE. 🤬

Amazing screen protector with high quality and good value. It's really easy to install, comes with dust removal, and sticks on very well. The only issue is a few bubbles, but that's normal and usually goes away after a while. overall its really worth it!

This screen protector was a little bit more expensive then others out on the market, but it came in a really big packaging with the expected frame that makes it super easy to install. As long as my screen was free of any debris there is no issues with the insulation. I would say it is definitely worth the money considering I will most likely never be putting another screen protector on my iPad.

First glass came broken; they replaced. Second one lasted 3 days then broke. Very strange, have always used Spiegan on all my devices,

Spigen always fits good, this one I don't know why was a bit more difficult to install, but it was my mistake. I was able to missalign it, even with the error I moved it to the right position and all good.. I though because I lifted it a bit, it wouldn't have the same adhesion, but its perfect..

Protection efficace pour écran Apple ipad pro 13". Facile à mettre si on prend bien le temps de regarder le tutoriel pour ne pas se tromper, notamment l'encoche prévue pour la caméra. Le gabarit en plastique est vraiment top pour ne pas se louper. Je l'ai mis droit et sans bulle du 1er coup ! Je recommande vivement !

The Spigen EZ Fit tempered glass is extremely easy to install thanks to the perfect alignment tray, giving a bubble-free application in seconds. The glass is crystal clear with smooth touch response and excellent fingerprint resistance. It fits precisely on the edges, works well with cases, and feels premium in quality. Easy to clean and absolutely worth the price.

Ich habe das Spigen Glas.tR EZ Fit Schutzglas gekauft und bin sehr zufrieden. Die Montage mit dem mitgelieferten Rahmen ist wirklich einfach und gelingt blasenfrei. Das Glas passt perfekt auf das Display und beeinträchtigt weder die Touch-Funktion noch die Bildqualität. Es fühlt sich hochwertig an und schützt zuverlässig vor Kratzern. Klare Kaufempfehlung!

何よりも位置決めが簡単で、楽に綺麗に貼れました。角が浮いてしまうことはありませんでした。 説明書に綺麗に貼るための注意事項が記載されているのですが、守らないと位置ズレが起きるようです。 完全に貼ってしまった後に爪で少し浮かしてホコリを取る際も問題なかったのが個人的には嬉しい点でした。安物のフィルムだと爪で引っ掛けた時点でフィルム内側に跡がついたり容易く変形したりするからです。 強いて悪い点を言うのなら、価格が高めであることですが、作りや内容物、サポート対応を考えると妥当です。 SpigenのiPhone用ケースやフィルムも愛用しているのですが、このメーカーはいつも期待に答えてくれる商品ばかり出してくださっているので好印象です。 買ってよかったです、おすすめです！