Spigen Tempered Glass Screen Protector [GlasTR EZ Fit] Designed for iPad Pro 11 inch M5 (2025) | iPad Pro 11 inch M4 (2024) [9H Hardness/Case-Friendly]

This is a quality product that was easy to install on my iPad Pro 11” M5 unit. No issues found using the iPad via touch or Face ID for access to and using any applications, and all images are sharp and clear. It’s thin, and I found no issues using it with the Apple keyboard. I expect this quality product to protect the screen for years to come.

I have had this thing for a while as a backup and needed to use it today (did not have Spidgen before, just cheap screen cover). This is pretty much perfection, my biggest issue is that for some reason the screen wasn’t positioned correctly to the tray and I was unaware until I placed it and lifted tray off. Thankfully, it was pretty easy to remove, place back aligned on tray, and then onto iPad. It could have shifted from sitting upright for several months but double-check alignment of screen to tray! Other than one very minor spot (invisible when screen is on) caused by needing to redo the cover is great. Appreciate that video repeats by itself when finished so you aren’t touching other surfaces. Easy to place, all tools needed were given, and extra wipes to ensure a clean screen. Easy to remove bubbles and I have no issue with touches registering. I do wish I could recycle tray or send back to be reused since it is heavy plastic (#7). If it keeps screen protected, I would buy this product again with few qualms.

Though there are some great glass screen protectors on the market, the Spigen GLAStR EZ FIT ones are by far the best ones I’ve used to date! Whether it’s for the IPad Air (5) like this one, or for the iPhone 14, the self-aligning and practically self-installing ones from Spigen are the easiest ones to install and give perfect results. The guides and carriers attracted to the glass assures they go on straight and perfectly positioned. Though the one for the iPad takes a little more care due to its size to get any bubbles out, bubbles are few and far between. A tiny bit of work with the included squeegee got the one bubble I had right out. Th camera cutout in the installation tool doesn’t quite match the camera on the series 5 iPad Air, but it seemed to work fine. I’ll always look for Spigen first! Buyers beware - there are knockoffs out there that copy the look of the Spigen packaging, so make sure you’re buying genuine Spigen products.

Not my first time I purchase this screen protector. Excellent and durable. Easy installation.

I have the Spigen screen protector for my iPhone 15 and found it easy to install and of excellent quality, so I decided to buy the version for my iPad Pro 11. I had a feeling it would be bit more difficult to install because the screen is much bigger...and I was proven correct. There are two tips I can give. First, keeping the dust off of the screen before applying can be challenging, so you may want to be in a room with no air flow. Second, be sure to match up the notches properly so that the cutout is on the camera end. After I applied the screen protector on the screen, I had some rather large bubbles in the middle. I spent at least 15 minutes rubbing them out and used a pretty good amount of pressure to do so. I did manage to get rid of them and am pleased with the result. It is more resistant to fingerprints than the iPad glass itself. The one big drawback - there is only one screen protector in the box (unlike the iPhone version), so if you mess up, you will need to buy another one.

I had the ESR non-armorite screen protector before this one, and the improvement in smoothness is quite noticeable after I installed Spigen's GlasTR EZ Fit. ESR non-armorite screen protectors are just straight up too grippy after prolonged use, and my fingertips was very dry because of this. In contrast, there are less friction for the Spigen GlassTR Fit screen protectors, and it is quite game changing for rhythm games requiring tap and drag, such as Arcaea, Lanota, and Project Sekai especially for long sessions. During installation, it is important to check whether the anti-dust sticker left any residue on the screen, and I had the anti-dust sticker leaving residue on the screen until I apply and lift the anti-dust sticker at the same spot. I believe I failed 2 screen protector application because I was not careful on this part, and it formed a small sized bubble. In addition to these during installation, for the corner bubbles I was able to eliminate all of the corner bubbles. During Step 2 (Waiting 30 seconds part for the screen protector), I carefully press and drag the corners to reduce the amount of corner bubbles, and after Step 2 and 3 was done, I immediately used the included rubber squeegee (The black rubber thing) and slide it across the corners to eliminate all corner bubbles first. Afterwards, I carefully removed the bubbles more towards the center of the newly applied screen protector. Do note that applying too much pressure when removing the bubbles can cause the iPad to flex a bit, and it may introduce corner bubbles again due to new air gap (This forms around the left side of the camera). This way I was able to flawlessly apply 2 out of 4 screen protectors for my iPad and formerly defective iPad. Overall it feels more premium than the ESR non-armorite, but it does come with very premium price (especially before it was -48% off). Installation is more difficult than the ESR non-armorite due to the need of positioning 2 sides of the tray instead of fully guided for ESR ones.

Whenever I upgrade my phone, I always make sure I get a Spigen screen protector. I pair it with one of their clear MagSafe cases. The EZ Fit frame makes fitting the protector a breeze, there's never any bubbles or dust particles. The protectors are edge to edge, however this a 1mm gap all around between the case and the screen protector allowing dust to gather, but this can be easily cleaned! With it being a two pack, there's always a backup if you accidentally break the first one. Very good quality glass, easy to use and great value for money. Would recommend.

This thing is super easy to apply and quality is good . It’s a bit pricey but ease of applying and the quality make up for it

いつも家電量販店で取り扱いのあるメーカーのものしか信用していないのですが、調べていて高評価との紹介記事を見かけて購入しました。 大まかな手順としては①付属品の型にはめて、②画面を綺麗にしたら③型に下の面のみ剥がしたフィルムを慎重にセット、④待った上の面を剥がすだけ。 なのですが、あまりにもスムーズに貼り付けられ、気泡も全く残らなかったので貼りミスったかと確認したレベルでした。 貼り付けたばかりのフィルムに関してはかなりの鏡面磨き感。ipadの綺麗な画質を活かしたい方にはぴったりです。 反射防止はほぼ期待できないと思います。反射防止を強く求める方は別の商品にするか、別途取り外し式のフィルムカバー等を併用するといいと思います。 また、表面はipadの実画面のようなガラスっぽいつるつるした感じの手触りでした。 保護フィルムなので、もちろん上記②の手順(自分で画面を綺麗にする作業)が最大のポイントにはなります。ここでいかにチリや拭き残し1つ残さないようにできるかが綺麗な仕上がりになるかの別れ道です。。 ただ、その作業に伴う付属品のキットも充実してる上、そこさえしっかりやったあとの貼る作業で何のストレスもないのでかなり満足度は高い商品でした。 追記：1か月ほど使用しましたが、画面があまりにもつるつるのままだったため、appleペンシルが使いづらかったことと、触感が個人的には好みではなかったため、別のフィルムに交換しました。 梅雨の時期や自分の手元が濡れているくらいでないと摩擦を感じないので、触覚など神経質な人は私のように気持ち悪く感じるかもしれず、そこだけ注意です。

Spigen products are always reliable. It perfectly fits on my iPad Pro and excellent quality.

It was so easy to paste it myself. It fit nicely to my iPad Air 2021. Getting someone from any store outside to paste a protector will cost me $50…but using this is cost me less than $20 and done neatly and nicely. Great. Will get this brand for future phone and iPad.