Deep Pour Epoxy Resin Kit 3 Gallon – for 2” Pours, Casting Resin Epoxy for River Tables, Wood, Flower Preservation & DIY Crafts – Crystal Clear & Bubble Free, UV Resistant & Food Safe

I’ve worked with many epoxy resins over the years, and Craft Deep Epoxy Resin is hands down one of the best for deep pours. It mixes smoothly, levels beautifully, and cures crystal clear with zero cloudiness. The viscosity is perfect for river tables, large molds, and thick pours—no rushing, no panic, plenty of working time. What really impressed me is the minimal bubbles. Even without aggressive heat, bubbles rise and release easily, which saves time and stress. Once cured, the finish is rock-hard, glossy, and professional-looking, with excellent color clarity when pigments are added. No strong odor, consistent results, and reliable curing every single time—this resin delivers exactly what it promises. If you’re serious about high-quality results and want a resin you can trust for deep projects, this one is a winner. I’ll definitely keep it as a staple in my studio.

Recieved my order in good time, it was packaged good. This is the first Deep pour I have used. The only issue I had with the instructions was it is 2 to 1 and I know there is more A 2 bottles and only 1 bottle B so that made me think I use 2 parts of A 1 part of B .I did some research to verify this just expected something in the instructions. That does not take away from the product. So I decided to make a big snail added very lite blue and glitter. Just to see how the product took those items. The resin mixed well, was easy to measure, I did have a few bubbles but I figure that is from my lack of experience but the bubbles came out easy and the snail came out clear. I have attached pictures to see what I used for color and the size of the mold I used. I will use the product for any deep pours I try, next up will be a small table with a beach scene. Good value, easy to mix very happy with this product highly recommend this product.

I could smell no odor at all. I have always used a very expensive epoxy (~$900/6 gal). In my experience the expensive epoxy has a toxic smell. It is also a better epoxy for deep pour tables, in my experience. When I mixed this epoxy there were more bubbles than I have ever seen. I was tempted to put it in a vacuum chamber but did not have the time. Poured it, went over it with a torch, and there were still bubbles everywhere. Came back 2 hours later and no bubbles anywhere and it stayed that way. My complaint is the desk top I poured is not as stiff as the expensive epoxy I have used. That said I am hesitant to complain. This epoxy sets much quicker and I took it out of the mold sooner. It deformed and I had to flatten it thinner than I like. My guess now is it might have been fine if I had left it in the mold for the 6 to 7 days I have in the past. This set so quickly I might have rushed it although I did stick to the directions, I think. I also made other mistakes that could have contributed to my problems. The desk top I made was mine and an experiment so I cared less about the outcome. I used wood from a birch tree that fell in a windstorm last winter. I dried the wood myself but as some of the wood was somewhat rotten it dried differently throughout each piece of wood. I tested the wood but with 2" cuts I wonder if I tested and poured too soon.The middle of the harder wood may have been more moist. I ended up putting a hidden backing and some 1" square metal tubing to keep the desk flat. It works, was a fun inexpensive experiment (sale - 3 gallons for $99), and I learned a lot so complaining seems out of line. In any regard, I am getting another 3 gallons to use for lathe projects. I have found that epoxy that is only mostly hardened can be turned without chipping better (still learning turning epoxy). The way this epoxy set seems like it may be perfect. I cannot comment on the clarity as I dyed mine. I am giving it 4 stars for now. May well move it up or down with more experience. Certainly good enough and inexpensive enough to try it again.

This was my first time ever working with epoxy, and I'm so happy with the results. I wanted to preserve the flowers from my mother's spray from her casket, so I REALLY didn't want to mess it up. After watching lots of tutorial videos and reading lots of reviews, I chose this crystal clear deep pour option. It was very easy to work with and there was no smell at all. It was a little messy/sticky, but I wore gloves, covered my work area, and cleaned up immediately afterwards. I made sure that my flowers were completely dried before I began, warmed the bottles each time before use as recommended, made sure I mixed to the precise 2:1 ratio, stirred in one direction to minimize bubbles as recommended for 5 minutes each time, and I poured in thinner layers over several days. I did have a few bubbles, but I monitored after each pour and was able to pop most of them before they hardened. After my final layer I left it to cure for a full 48 hours. They very easily pulled out of the molds (I did use mold release spray that I'd seen in tutorials but don't know that it was necessary) and were completely hardened. One thing that I will note - and I have emailed the seller and waiting for a reply - as other reviews mentioned, I did not have enough hardener for the amount of epoxy, even though I was very careful and precise in my measurements. I originally purchased the 1.5 gallons but needed a little more so I purchased these smaller bottles. I had to use this bottle of hardener to finish out the epoxy from the original purchase, so now I'm left with almost a full bottle of epoxy and very little hardener left (see last photo - the hardener bottle should still be half full for that amount of remaining epoxy). That would be my only complaint about this product, but overall I'm thrilled with my results. As a first time epoxy user, I highly recommend this product! **Edited to add - The seller quickly responded to my message and sent me another set at no charge. Could not be happier with this product or this seller! Highly recommend! 5+ stars

I’ve been using craft resin for a while now and I have to say I have never been disappointed. I wanted to try out the deep pour in a smaller portion to try, so that I can get a big set and make my wedding flowers into a small side table, coasters and clock set. This resin is easy to work with and sets clear. There was no cloudiness, no odor and very minimal bubbles (even though the bubbles might have been my mistake). I tried it on a coaster for a teacher friend and it’s so clear. The price is great and I’m definitely going to continue to use Craft Resin.

I’ve tried many resin brands but Craft Resin is by far the best out there! Their deep pour epoxy has excellent clarity with no bubbles in sight. You have a long working time and NO ODOR at all. The finish product is strong and crystal clear with no cloudiness. Cure time is about 48hrs which is normal for deep pours. Craft Resins Deep Pour is absolutely worth it. It’s reliable, consistent, and produces a finish that looks high-end every time.

Love this resin. Easy to use, no bubbles, great results

Luckily i poured this tester and NOT my entire three foot table first! As it states, is crystal clear and hardened well, but man what happened??? I spray painted the bottom pieces with three or four layers of spray paint and clear coat. the Original pour had few bubbles and all my goes but after i woke the next day you can see i have massive bubbles and it stripped all the paint off the pieces and left them the original orange color totally disappointed and will be looking towards another deep pour option thank god i didn’t pour the table first