- for Z Fold 6 Case with S Pen Holder [UB Pro Mag] [Compatible with MagSafe] [Military Grade Protection] [Built-in Screen Protector & Magnetic Ring Holder] Rugged Phone Case (Black)

This is not my first time experiencing supcase for the z fold, but I'm loving the new option with magsafe for the z fold 6 that wasn't available for previous versions of the z fold family. The magsafe also works as a kickstand and finger ring to help hold your phone better and more secure. The case is solid and very sturdy. The built in screen protector is clear and made of glass, not cheap plastic like some others that are available. It is a little on the pricey side, but when buying a $2000 phone, protection is key and this case checks all the boxes.

The front of the case cracked for no reason 2 days after install. It wasn't dropped, placed in temperature extremes, compressed or otherwise compromised. The company was unwilling to offer assistance with replacing or refunding the case. I only needed the front replaced. In general, the case was far bulkier than others. It struggled with magnetic charging. S Pen holder wasn't a firm hold. The slightest touch on the side of the case had the pen moving freely within the case.

This case could be the overall best case out for Fold 6 at this time. Great protection with built in screen protectior, bumpers on each corner, and spine protection with built in windrow to see and release your S Pen. Pros Front screen cover isn't actually attached to the back cover, but clasps slightly around and is very sturdy without adhesive. I actually found it easier to slide this on sideways. Screen protectior is actually pretty thin. I put an anti glare matte protector on mine and this on top of it and turned on touch sensitivity with no noticeable difference. Spine has enough buffer that the ground will never hit the spine of your phone should you drop it. Grip and kickstand is not bad. The kickstand is sturdy and holds the phone up well even when open. Cons EXTREMELY Weak Magnet. I've never seen a magnet this pathetic that wasn't in a flea market bargain bin. It won't even try to hold the phone up if you attach it to anything. I have a paper thin metal ruler that I can touch to it, and take it off while barely feeling any pull. Kickstand doesn't actually work as a finger hold. It's either open or closed, and only opens to about a 45° angle. No flexibility, can't bend or rotate, and flat. Very uncomfortable if you decide to use it for your finger. Bulky (that's kinda what you need if you want real protection though) that's more because of the spine than anything. The hinge sticks out a bit past the camera. The front is completely within reason though.

Great heavy duty case for the fold 6. Must've dropped the damn thing 10+ times without doing any damage. I'm like the tazmanian devil with my phone and it sees a lot of use, so having a product like this to protect my investment gave me peace of mind.

Bought this in Nov 11, 2024. The hinge on the back of the case where the metal ring is and where you mount it for wireless charging, has broke/cracked. I cannot even open the ring anymore. It was nice to have when you open the phone to take notes on the screen. I could stick a finger through the ring to better hold the phone. I would take my phone out of the case to take a photo of the cracks on the ring hinge, but I'm afraid something else might break. I did superglue & baking soda the first crack, it has held but there was still a tiny gap in the crack, but now the other side has cracked. Another issue is that it's very difficult to tap on things on the left edge of the screen as the case goes right up to the edge of the usable screen space, and there's a bit of a "lip" there. A lot of times I have to tap multiple times to click on something in that area, or twist my finger around to get it. Sometime I just get frustrated, give up, and then just open the phone and tap it using the inside screen. Another caveat is that I cannot find a car phone holder/mount that works well for this case if you want to mount it while it's open. The area where the s-pen mounts makes it so the phone is not flat on the back side. All tablet style mounts need the back of the phone/case to be flat. I've had some success with using a normal phone mount, and just having half the phone hang over the side of the phone mount when mounting with the phone opened up. Just make sure to get a strong phone mount cause the weight off-set has caused my phone to fall out on modest road bumps. Other than that, the rest of the screen taps are fine. I have dropped it twice and it has saved my phone. The screen has held up well with no visible scratches. Grip is good, easy to install, and appreciate that it holds the s-pen securely. The issues I mentioned are enough for me that I will shop for a new style case next time. Even though I did drop my phone twice, the impact areas were not affected, so my deduction in stars had nothing to do with the protection is has afforded. If anything, that's why it receives 2 stars, because it did some of what it was supposed to do.

This is an excellent case for the Z Fold 6. Attaches easily, protects the small screen, flips open and closed easily, stores the S Pen, has a fold-out stand that works fairly well, and includes MagSafe (an amazing feature). Expensive, but worth it! If you want a belt holster that accommodates this case, the follow holster fits quite well and is very inexpensive: https://www.amazon.com/dp/B09CPPH866?ref=ppx_yo2ov_dt_b_product_details&th=1

It lasted until 1/26, I purchased it back in sept 2024. For the price and military grade protection, I was hoping I wouldn't need another case... the clip to push the ring holder broke so the ring no longer stays inside the case and it just stays popped out. I no longer can use it with my magsafe holder for my car because it keeps the phone just tilted to the side and can't reach the touch screen unless I push it back and keep it back to use the touch screen. The pen holder doesn't work very well and I've had to replace my pen 3x because it fell or popped out on its own and fell and broke the pen but still I used some tape and kept it in-place because I thought I paid for quality and at least the phone case would last me for the life of my phone. But without the ring holder being secured its really the last thing that made me need to change out my case. I tried to make it work as much as possible but alas it was not meant to be... if not for these issues, I probably would end up buying the same case...I did like the concept... I even did promoted to friends am really sad that it didn't last longer...

I purchased this case on 9/14/24. The case is very well built and looks great on the phone. I had zero issues with the touch screen and did not have to turn on touch h sensitivity. My only problem was my magsafe battery pack would not work with this case due to the hinges on the back from the hinge protector. I had to return it the same day. My round style magsafe charger worked great on it. It something to keep in mind if your using a magsafe wallet or an accessory that isn't round. You will probably will have the same problem. All in all it's a great case.