Fusion Magnetic [Compatible with MagSafe] for Samsung Galaxy Z Fold 6 Case, Transparent Non-Slip Hard PC Shockproof TPU Bumper Protective Phone Case for Magnetic Charging - Clear

I do not think this case has received enough praise for its design and use. I tried a couple of samsung official cases before switching to this and have now used it for nearly a month. The protection on the front of the case and the fact this is a one piece design, is great compared to some 2 piece models. The front stays on and connected, and also gives adequate protection. This is not a bulky case and intended to be minimalist whilst also adding enough protection. The hinge is not protected but this is a small compromise as the area of hinge is so small that most drop areas are covered in the event of an issue. I like this case... the best of the options so far. I still look around at new additions to the available cases for fold 7, as I like to have a few options to switch between depending on my mood. But this Ringke case meets 95% of my needs and feels good in the hand. I have the magsafe option and it has a strong enough magnet to be useful.

Great case looks nice and does not add too much bulk to the device. I like that the front and back are connected. And it reduces the wobble when laid flat. 2 small gripes which holds it back from being a 5: 1. The magsafe ring is too high up meaning magsafe power banks will likely foul with the camera bump. I guess this is more a Samsung fault putting the charging coil so high up on the phone? 2. The protection near the camera is very precise meaning If you have lens protectors these will have almost no tolerance. If you need to remove the case and you're not careful you can inadvertently pop the lens protectors off

One of the best Galaxy Z Fold 7 cases without hinge protection. Fits like a glove. Easy to remove and fit. One thing I noticed with this one, is how well dust and pocket lint doesn't build up between the case and phone. A cheap yet high quality case. No need to use the stickers and does not feel like it would come off when dropped.

whilst this case seems good and is slim i feel that its not strong enough. the front cover has already snapped due to simply taking the phone out of my pocket

This case is not I would expect from such a well known brand. Visually it's not great. Despite supposedly being slim it is quite bulky. It is also a fingerprint magnet! The back part fits well with a lot of camera protection. However the front part looks flimsy and actually obscures the left hand side of the front screen a bit. I think the sizing is slightly off and this makes the front display appear off balance. The hinge part of the phone is very exposed so there is zero protection there. I have bought another case as I was not happy with the quality and this case does not make the most of this stunning phone.

Case seems OK, however the positioning of the magsafe is poor for attaching magsafe battery packs, as the raised camera protection means the battery can only "stick" to the case at an angle which isn't good. Not convinced an still debating whether to return....

Great fit and the magsafe ring is quite strong. Easy to fit and the front has an adesive that keep the cover in place. Nice looking, slim fit cover.

I have been pouring through lots of reviews trying to find the best case for the Fold 6 - and it is a rabbit hole you don't want to go into. Yeah, there are those super thin ones (aramid fibre) and magsafe ones that look really cool but a bit on the pricey side. If you are on the fence on what to buy - get this one. It is cheap, but the quality is really good. It protects the Fold quite nicely all around, it has a high enough lip for the front screen, and a good camera bump protection. It doesn't add bulk to your Fold as well. The sides are made from soft rubbery material but the back plate is made of hard, clear plastic. It works with wireless charfing too. Just a few cons - the back plate is a fingerprint magnet and they used black adhesive for the thin bezel on the front, not a deal breaker for me but it might be for some. If you are in to magsafe - there's a magsafe version too. I didn't get it because my fast wireless charger doesn't support it. I highly recommend.

Le quedó muy bien al celular

Bonjour, si vous venez d'acheter un zfold 6 est que vous hésitez sur quel coque prendre, je vous conseil très fortement de vous diriger sur celle-ci car elle est vraiment très agréable au toucher, protège très bien le téléphone, elle est pas trop épaisse, elle ne glisse pas des mains, en ce moment il fait très chaud donc ce n'est pas représentatif comparé à un temps plus froid mais vraiment si je dois en conseillez une, c'est un très bon rapport qualité prix.

the clear color became yellow in just 5-7 days and being 100% indoor at home low quality meterial and no UV. not value for money .

Perfetta, aderisce bene e non fa rimanere aperto il Fold. Consigliato.

✅ Contesto d’uso: Utilizzando quotidianamente il Galaxy Z Fold 6 per lavoro, svago e mobilità, avevo bisogno di una custodia che non solo proteggesse, ma che valorizzasse il design unico del dispositivo pieghevole, senza compromessi in termini di funzionalità. Dopo numerose ricerche, questa custodia Ringke si è rivelata la scelta perfetta. 📦 Prime impressioni: La confezione è minimal ma ben curata. All’interno si trova la custodia suddivisa in due parti (anteriore e posteriore), perfettamente modellate per aderire al corpo del Fold 6. Le istruzioni per l’installazione sono chiare e l’inserimento è rapido e preciso, grazie all’uso di strisce adesive preapplicate che evitano movimenti o allentamenti nel tempo. 📱 Qualità dei materiali: La plastica è rigida, trasparente e cristallina, con finitura anti-ingiallimento. Si percepisce immediatamente la robustezza del materiale: non è una cover "molle" o economica. Il telaio protegge gli angoli e i bordi del dispositivo con precisione millimetrica, senza ostacolare il meccanismo di apertura/chiusura né alterare lo spessore in modo eccessivo. Rimane sottile e maneggevole, ma incredibilmente resistente. 🧲 Supporto magnetico MagSafe integrato: Una delle funzioni più geniali! Grazie all’anello magnetico integrato sul retro, la custodia è pienamente compatibile con tutti gli accessori MagSafe: Supporti da auto Caricatori wireless Stand magnetici da scrivania Tutto funziona alla perfezione, con tenuta salda e allineamento automatico preciso. 🖐 Ergonomia e grip: La presa è salda, il materiale non è scivoloso e migliora notevolmente la maneggevolezza del telefono, soprattutto da aperto. Non ci sono bordi taglienti né fastidi nei passaggi frequenti da chiuso ad aperto. 🛡️ Protezione reale: L’ho testata involontariamente con una caduta da oltre un metro (Fold chiuso): zero danni, zero graffi, zero scheggiature. Gli angoli rinforzati hanno assorbito l’urto alla perfezione. La parte frontale ha un piccolo rialzo che protegge lo schermo esterno, senza ostacolarne l’utilizzo o l’estetica. 🎨 Look e trasparenza: L’effetto visivo è eccellente: valorizza il colore originale del telefono, permettendone la visione completa, cosa rara con le cover più protettive. La trasparenza è totale e il profilo sottile conserva l’estetica premium del Fold 6. 💡 Considerazioni finali: Questa custodia ha centrato in pieno ogni esigenza: protezione, funzionalità, compatibilità e bellezza estetica. Il fatto che supporti MagSafe è un vantaggio ENORME per chi, come me, ha già diversi accessori compatibili. Non c’è nulla da migliorare: è davvero perfetta. ➡️ La consiglio a: Chi vuole proteggere al meglio il Galaxy Z Fold 6 senza sacrificarne lo stile Chi usa accessori MagSafe e desidera integrazione completa Chi vuole una cover rigida, solida ma sottile 📱 La miglior cover mai provata su un pieghevole. Ringke non delude mai.