LED Driver 8-24W for Single Color Ceiling Strip Spot Light Module Panel, Replacement LED Power Supply Starter Transformer Adapter, Input AC85-265V Output DC24-85V

Was very easy to install, came with an extra pig tail just in case one is needed and it works very well. Used it to replace a dead driver in my Mom's porch light which has around 24 single leds. I did not try this driver with a dimmer switch so I cannot comment on its usability for dimming. I think this driver is a good value for the money as I paid around $18 for the original light.

Wasn’t about to throw aways my $200 led bathroom fixture because the ballest burn out . I wired both of them in series and it bathroom light works just fine . It’s even brighter now

Worked for what i needed them too

It doesn't remember color setting after powered off. You have to reselect led color every time. Replaced my ceiling fan light driver and hopefully it will last.

Bought model SF 8-24W 1CCT to replace failed 50V LED driver in my bathroom light. Before connecting measured the open circuit voltage, it was ~160VDC! (way outside of specified 24-85VDC range). Under the load voltage dropped to 50VDC, with current at ~205mA (not 280mA as specified). Not sure if this is normal, but the repaired light seems to work fine.

Worked great for ceiling fan that came with 3 color LED strip but no lighting driver (also from Amazon… hmmm). Anyways, this worked great as long as you get the connections right!

Not working

Purchased to replace LED power supply box inside my fandelier. The voltage description was not exactly the same as the box I replaced. However, it is similar, so I took a chance. It worked as described, and now I can control my LED light color again. Before, the damaged box only turned the light off and on, then automatically blinked between colors. When I originally installed the fandelier, I was able to switch between colors using the remote. Now, I can control the light color again. Product is extremely similar weight, quality and size, with the exact same installation. By the way, my fandelier is not on a dimmer, but it does change between cold, mixed, and warm light settings. Recommend you try this box before removing the fixture entirely! Good luck!

Exactamente lo que se ofrece y funcionó perfecto

it cannot be used.

Funcionó a la perfección.

Cumple bien su funciòn, esperemos que dure

This unit burned out my Led series in a shower of sparks. Voltmeter read it as 180+ when given tolerance was 130. DO NOT BUY, not worth it.