Dual-Band BE3600 Wi-Fi 7 Router Archer BE230 | 4-Stream | 2×2.5G + 3×1G Ports, USB 3.0, 2.0 GHz Quad Core, 4 Antennas | VPN, EasyMesh, HomeShield, MLO, Private IOT | Free Expert Support

After reading reviews of some other brands and the installation problems encountered, I was almost reluctant to buy any router as I am not all that tech-savy. However, I wanted to replace my Spectrum-supplied router and stop paying monthly rent forever. I found that TP-Link's installation instructions were simple, clear, and best of all, they worked. Getting the router up and running was no problem and I soon was having internet service on two towers and two iPads. The only real problems I encountered were with trying to get my Roku box and Ring doorbell connected to the internet. The problem was my wi-fi password. HELPFUL HINT: when you set up the new wi-fi site, you will need to create a password, as you don't just automatically use your old site. When creating your password, use only letters and numbers, NO special characters like ##, etc. For some reason Roku and Ring, did not recognize the password. I contacted Ring for help, Ring finally passed me off to TP-Link and Walter, a very patient and helpful rep led me through all sorts of steps, and finally mentioned the password problem. I changed the wi-fi password to only letters (Caps are OK) and numbers and had no more problems and got Ring and Roku up on internet in no time. This problem may happen with some other apps; don't take that chance. Letters and numbers only. I should mention, there was no attempt to get me to buy into a multi-year security program like some people have complained about some other brands. I'm not sure, but I think this router is faster than the Spectrum router; that may be my wishful thinking. At the worst, it is just as fast as the Spectrum router, which is plenty fast for me. This router has good range and covers my whole house. I am very happy with my new router and highly recommend it.

The TP-Link Archer BE230 is a very good router for anyone looking to step into Wi-Fi 7 without spending a fortune. Setup is straightforward, the signal is strong, and it delivers fast, stable performance for everyday use like streaming, gaming, video calls, and smart home devices. One of the best things about this router is that it gives you modern Wi-Fi 7 capability at a more affordable price than many higher-end models. Even if not all of your devices support Wi-Fi 7 yet, it still does an excellent job handling multiple connections and keeping speeds consistent across the home. The dual-band performance is solid, coverage is reliable, and the interface is simple enough for most people to manage without frustration. It is a practical upgrade for someone replacing an older router and wanting better speed, improved responsiveness, and a bit of future-proofing.

I have 1Gbps internet via my ISP. However, I was getting 120Mbps-140Mbps in my work area upstairs and around 300Mbps Wifi downstairs when closer to the router. I was using a TP Link Wifi6 range extender but didn't help much and a TPLink Powerline adapter upstairs connected to another mesh point - sadly while this one was showing 140Mbps and 205Mbps at times, the other end of the powerline adapter could only push out 40Mbps-60Mbps tops which sucks. Getting 40Mbps to the PS3/PS4/Xbox360/XboxOneS/AmazonFirestick etc. means it is super time consuming to do anything. Was considering running wired Ethernet for $$$ upstairs and found Wifi 7. Wow... After an hour of research bought this TPLink BE3600 Wifi7 router. Easily swapped in replacing the ISP Router and easily configured it. 10m later - boom - I'm now getting 600Mbps on PC upstairs, 705Mbps on laptop upstairs and 100Mbps on farthest point of house (up from 30Mbps) - simply due to putting in this new router!!!! I just purchased another Wifi-7 Range extender from Netgear (TPLink one is sadly way too expensive at $120-$180 while Netgear one was on sale for $80) and I think I should be able to turn the 30Mbps to ~500Mbps at the farthest point from testing. All in all a success! Thanks to this Wifi-7 router!! MLO has not even been turned on - strangely the default is OFF for that setting as seen. Must buy this imo to future proof if upgrading to 3Gbps+ internet as well.

I’ve been using the TP-Link Archer BE230 for a couple of weeks now and it has been working flawlessly. Setup took under 10 minutes using the Tether app — super straightforward even for someone who isn’t very tech-savvy.

Easy to install, even for a person not tech savvy. Signal strength is pretty good. I have a 1400 sq ft house & I still get signal when in my yard close to the house. I had to reset a few times when I first got it but it's been a couple weeks now & it's working well.

Phenomenal signal range. Make sure you disconnect the modem and wifi router together. Then plug in ONLY the modem and wait one or two minutes UNTIL the last light on the modem (internet light) is blinking on and off. This is your cue to plug in power to the Wifi router. I found this issue unique with the TP-link Dual Band BE3600. If you don't time it right it will not connect to the internet. Strange but I hope this helps out someone.

TLDR: I think Tom's Hardware Guide said it best "Bringing Wi-Fi 7 to the masses... The TP-Link Archer BE3600 is cheap, but you also don’t get the full spec of features or performance of “true” Wi-Fi 7 routers". If you’re not big into gaming and just want a no-frills router to support your 1 Gbps or lower internet connection, there’s nothing wrong with the Archer BE3600. I personally, am very happy with my purchase and it's probably the best solution for 85% of people out there/ non-enthusiasts. NOTE: I paid $83 for this Wifi router using an Amazon coupon. Which I think is a very fair price for something I only plan to upgrade every 5-7 years, and only if I have to. I also live in a townhouse, so it's not like the signal has to go 60+ft. Details: Upgrading from a TPLINK AC1750 (Archer A7) [release ~2018], using Comcast internet (Fast plan; up to 600 mbps down) and a Netgear AC1200 WiFi USB Adapter 802.11ac Dual Band, USB 3.0 (on my computer but in a USB 2.0 port) which was about 7 feet away from the wireless router and I saw a measurable increase in my download speeds (~45% from ~260mbps to ~380 mbps using Ookla speed test). Purportedly the TP-Link BE3600 which was released in the 2024/2025 timeframe uses the same frequency bands (5 GHz and 2.4 GHz bands) as the older TPLINK AC1750 (Archer A7), but uses the newer and faster WIFI 7 (802.11be) vs the older WIFI 5 (802.11ac) protocols. The TP-Link BE3600 advertises up to 3.57 Gbps (aka 3570 Mbps; 2882 Mbps in 5 GHz band + 688 Mbps in 2.4 GHz band) whereas the Archer A7 only 1.75 Gbps (1300 Mbps in 5GHz + 450 Mbps in 2.4 GHz bands). Practically speaking the internet says anything above 100 Mbps should be able to run multiple devices pretty well streaming. But I'm upgrading anyway, because my mother needs a new router so she doesn't have to pay $10/mo for one from the cable company. I have no complaints. Easy to setup and connect to. I realize I'm now probably being gated by my older Netgear AC1200 WiFi USB Adapter which is using a USB 2.0 port (max speed 480 mbps) but my speeds are enough for me; my newer gaming PC which sits about 10 ft away from the router and uses a built-in WIFI card (Wi-Fi 6E 802.11ax) manages ~500 mbps down. CAVEAT: I do want to note my older Netis WF2120 Wireless N150 Nano USB Dongle 802.11 b/g/n (aka WIFI 1/3/4) on an older computer was not able to see the 2.4 GHz signal from the BE3600 whereas it could from the AC1750; so I replaced it. I ended up using a spare Wavlink 600M dual-band connectivity (2.4GHz and 5GHz) USB WiFi adapter which uses 802.11ac WIFI 5; and had to update the drivers on my older windows PC in the process (to recognize the Wavlink adapter).

UPDATE 11/23/25: I successfully found my solution to where Smart Connect totally failed to allow WPA 2 and 3 in mixed mode and none of my WPA2 devices would connect nor could I use WPA3 in mixed WPA2/WPA3 mode at all, zero connection to WAN. I turned off the Smart Connect, kept the same Network name for my primary 5Ghz devices connecting with WPA3 personal only, and created a separate WPA2 only new network for the 2.4GHz band. All of the newer WPA3/5GHz devices were able to connect and the older devices that were only capable of 2.4GHz and WPA2 or lower protocol, also were able to connect perfectly on the 2.4GHz network. Given your network and LAN access (contain) both Networks, the router allows access to both seamlessly. My several security cameras on the 2.4GHz/WPA2 network are accessible from my other 5GHz network so basically all devices now are contained in the same LAN, although connected to one or the other network only. Perfect! As said, the smart features of this router stink, and while they may work for some users, there’s many people out there that had to go fully manual for Network and Band setup as I did. (read some forums out there!). So net is, this router is fully usable, but, do not trust its smart features to work well. I’m hoping a future firmware update makes this new router work as well as my old wifi6 AX55 router did in full Smart/auto mode. for now, do what I did if you are experiencing internet connections issues and/or related new/old device issues. ———————————————————————————————————- I’ve used a TP-Link AX55/3000 model here for a year with a cable model, and then, after switching to FIOS and an ONT (not a modem) this router continued to not miss a beat. 100% stable connections and speeds. We had a recent issue where our FIOS service got unstable and I ordered the BE3600 with an assumption it was a router issue. We lost internet for a week. The issue was not router related. Our ISP tech found two faulty connections in our FIOS wiring and once repaired, we were back at full speed. I tried to keep the BE3600 in operation since it was set up, but, keep loosing internet connection when using a wpa2/wpa3 combo which we need for a mix of old and new devices. Our old wifi6 TP-Link worked fine in this mode, but, the BE3600 refused to stay connected if we chose a wifi security protocol for both wpa2 and wpa3. Only WPA3 seemed to stay connected. But, doing that, we lost connections to several old wpa2 only devices. Yes, we can create a unique wpa2 and wpa 3 network using different names and passwords, but, the whole benefit of this “smart” technology and features for these TP-Link routers is to be able to allow them to handle all “traffic” and required frequencies and security wifi protocols to connect using their SMART features, to both older and newer (wpa2 and/or wpa3) devices. This wifi7 router fails miserably at using its SMART technology to communicate to both older/wpa2 and newer wpa3 devices. Simply put, the SMART connect feature is useless. I ended up reinstalling my old wifi6 AX55 TP-Link router and everything was restored for compatibility. Zero issues for using both wpa2 and wpa3 protocols at the same time. We’ll keep the BE3600 as an emergency backup, but, if you have few, if any wifi 7 devices able to use the wifi 7 protocol, stick with a wifi6 router. Keeping it simpler works better!

Excelente router , con el pareamiento con mi extensor tplin Rx705 , hacen un trabajo perfecto con el On MESH , y una comodidad en no tener que cambiar la conexión como antes tenía que hacer , la potencia y alcance aumentó notablemente en el extensor y ahora el cono de wifi se muestra completa., y el streaming corre perfectamente sin titubeos de ninguna especie. La capacidad de tener un usb o disco en el puerto usb3.0 es algo que quería conservar de mi netgear anterior , pero si me costo entenderlo como cambió del Ready share a como lo maneja aunque el asignar solo al windows media player en lugar de otro player como el VLC , eso no me gusto pero funciona. Ahora no hay info como acceder al usb de manera remota. Otra cosa que no mencionan es que tiene sus perforaciones en la base para poder montarlo en la pared que es muy util.

I switched over to a new router as my old one was overheating and not reaching my full speed through the ISP. this router allows everyone in the house to connect their devices and it doesn't slow down at all. A good buy.

Well made from quality materials but overly complicated to set up and the range is disappointing compared to the claims made by the manufacturer.

Funciona muy bien sin problemas de conexión.

Our original router was an Asus, and it was fantastic—lasting about seven years without any hiccups and still receiving updates from Asus. Eventually, it started having connectivity issues and became unreliable, so we decided to replace it. We initially bought another Asus router, expecting a similar experience, but it turned out to be a disaster. It had constant wireless connectivity issues, wouldn’t reset properly (even with a power cycle), and would only start working again when it felt like it. We decided to switch brands and landed on this TP-Link router. So far, it’s been great. The setup was quick and easy using the mobile app, though a web browser setup is also available. I had it up and running in about five minutes. The wireless range is excellent, covering my entire home without any issues. The only problem I’ve encountered is remote streaming with my Xbox One on my local network. It worked perfectly on the previous Asus router, which had a dedicated gaming mode that optimized connections. This TP-Link router doesn’t have a similar feature, and I haven’t yet found a setting to tweak for better performance. I believe it’s just a configuration issue, not a flaw in the router itself—I just need to dig into the settings(more likely a me issue as I'm not a network savvy person). Other than that, this router has been fantastic, and I’d highly recommend it! Pros: ✅ Quick and easy setup ✅ Strong and reliable Wi-Fi coverage ✅ Stable connection Cons: ❌ No dedicated gaming mode (may require manual settings for Xbox streaming)