ZEKOO Bifold Barn Door Hardware: 80 inch Bi Folding Door Hardware Kits for 76" Closet Doors - Easy Assembly Smoothly Quietly Bifold Doors Track Kit - J Shape Top Mount Roller - Bi fold Hardware Only

Good product. Was a huge upgrade to my aged double bifold doors for laundry room.

This hardware was exactly what I needed. It was easy to install and looks amazing.

Included all parts required for the barn door, besides the actual door. We fabricated the door ourselves for a 29" wide size entryway and used the hardware included. It's a bit tricky to get the door height aligned over a carpeted floor. I recommend a pair of construction jacks to micro adjust the height to get everything aligned. Half a year later the door still works as expected. The instructions could be more clear but as long as the sizing is planned out beforehand it should be no problem

Mi gente 200% recomendado, los de Temu, los vote.El vendedor, exelente..

Sturdy, heavy, well built, but the screws were too big for my bathroom door frame. I did not get to use the product. It was my fault miscalculating, but the materials are very heavy and sturdy.

Work just fine and easy to install

Tengo que decir que la instalación de la puerta fue laboriosa y me tomó más tiempo del esperado, el producto es excelente, estéticamente era lo que esperaba. La puerta quedó genial.

Easy to hang/install. Directions are well written and the measurements are correct (and in inches!). A 1/4 inch cordless impact driver is your friend.

Instructions pretty clear. The instructions for one section -the part the makes one wheel stationary- did not match the piece supplied. But in fact the piece supplied was easier and more intuitive . Read them, look at all the information provided. NOTE: you need a socket set, mostly bolts rather than screws. Nice quality metal.

This is my second order for this the first order is in the basement on the bedroom door with a low clearance and this is a great kid it's a pretty beefy kit so it's going to support whatever the weight is indicated. I used this on a hollow core door which weighs next to nothing but also presents a whole new issue that's nothing to do with this kid though. It's beefy the bar itself the flat bar has got some girth and weight to it which is good I think you can support some pretty good size doors at least on our other kid and this is the same always recommend you get a stud finder that's going to be important. There is no pro tips on this it's just follow the instructions I did cut my bar down I'm just based on my requirement and then just painted the end with like a foam brush and some trim cloud only because I cut it down to a specific size. The rollers are super quiet that that was a nice part they don't make this loud noise like some of the rollers are hard hard plastic and these are as well but they roll with a really nice bearing and it's like all you hear is a very very light noise and it's super quiet so for example in a bedroom if somebody sleeping and you want to get up and leaving close the door it's not going to wake them up. Installation again I I would recommend depending on what you're doing probably two people I did it myself it's a pain in the butt however you can start with the center bolt like a center lag bolt to kind of balance the bar and then work your way left or right that's what I did but it's better to have two people if you can pre-drill your holes I'll make sure you're interested or if you're using concrete light bulbs either you know either warm start in the center work left and then right or whatever your preference is and snug it up and away you go super simple.

ZEKOO 36" Bifold Barn Door Hardware Installed this on a 36" opening with standard panel doors. Hardware is mostly steel with a decent finish—nothing fancy, but solid enough for residential use. Track was straight, rollers were consistent, and once everything was aligned the system ran smooth with minimal noise. Install is straightforward if you’ve done barn door systems before, but layout matters. You need to hit solid backing or blocking—don’t rely on drywall anchors alone. Clearances are tight on bifold setups, so take the time to dial in your spacing and plumb the doors properly or you’ll fight it. Instructions are usable but not detailed—this isn’t a beginner-friendly kit without some experience. That said, once it’s in, it operates clean and does what it’s supposed to. 👍 Pros Good value for a bifold setup Smooth operation once adjusted Hardware feels solid for the price 👎 Cons Instructions are basic Requires precise install/alignment Not for heavy or oversized doors

This is a great way to have the barn door look when closed, then be able to open the whole closet at once. I had room for overlapping barn doors but would only be able to open one or the other to get at the contents of the closet. This system here is an ingenious solution! Love it. Made my own pine doors to hang.

Gave the room a total makeover. Was slightly difficult to install. But once the grooves are aligned, it’s all good