Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover Compatible with 2002-2018 Dodge Ram 1500; 2003-2026 2500 3500; 2019-2024 Classic | 6'4" (76") Bed | TG-BC3D1011

A well designed tonneau cover that is made with quality materials. Easy to attach to side rails of pickup truck.

First off, this is my second tonneau cover from this specific manufacturer. And no, not the second cover for the same truck....this is the one I bought for my current truck. My first one was for my 2013 short bed Ram 1500 I bought 9 years ago. That tonneau cover was still in good condition when I traded the truck in three weeks ago. The quality of these tonneau covers is excellent! Given how my previous cover lasted 9 years in the wide ranging weather that Ohio throws at us....from 90+ degree summers, high winds, to -10 degree winters with 6+ inches of snow sitting on it. My previous cover held up exceptionally well with regards to the vinyl, the stitching, and clamping and fitment. The steel cross bows always stayed firm, allowing water to run off and never shifted or came loose. Literally, the only thing I could possibly complain about was the rubber weatherstripping that was adhered to each of the last two sections of the tri-fold cover (meaning the two rear-most sections that actually fold forward on top of the front section). Those individual pieces of weatherstripping on each section eventually came partially unglued and would hang off the sides of the frame. Mind you, this was probably 5 or 6 years into owning the cover, which was used nearly on a daily basis. Thankfully, they were easy to reinstall using a little adhesive spray. Regardless, the tonneau cover always kept the water/snow/debris out of the bed and looked and worked great for 9 solid years of use. Now, onto this newest one. The latest one that I bought....which is for my 2011 Ram 3500 crew cab, (8') long bed dually. Some improvements were made to this cover over my previous one. First, this new tonneau cover has additional safety straps that clip to the bottom of the bed rail in the same area as the forward-most clamps that hold down the front of the cover. This ensures that if one of the front clamps were to somehow come loose, the tonneau cover won't simple fly off the truck! A nice feature! Second, when the cover is folded forward, there are two plastic connectors that clip in place to keep the tonneau cover from unfolding from it's forward (folded) position while driving. On my old version, each end of the plastic connectors (male and female ends) were on short straps that you'd have to fish out, line up and connect. On this new version, the female connector is riveted to the forward most section of the tonneau cover frame near the cab window. The male connector is still on a short strap. This allows one-handed connection of the strap on each side of the cover! A nice little upgrade! I'll gladly post a long term update in the future (hopefully in another 9 years 😂). But in my opinion, you can't go wrong with this amazing tonneau cover! When you install it, make sure to take the time to measure and ensure you are centered side to side so the seals land equally in the same place on each side bed rail. Then, do the same front to rear before clamping down the forward-most clamps. This ensures that each seal has a rail to land on which keeps your bed dry. Sorry for being lond winded. I really hope this helps somebody!

The tonneau cover itself is 5 stars. It came assembled in the box and was a breeze to install. The construction and quality are well worth the price. Once installed, it was flat against my bed with no obvious wrinkles or deformities. The included adhesive weather strip was a must for my Ram 1500 as the front of the bed (behind the cab) was about 1/2" shorter than the sides. The weather strip ensured no light was visible from inside the tonneau cover once installed. The kit included spacers for the front clamps to fine tune the fit, and 4 pads for each of the latches to prevent marring the sides of the truck. I have a spray in bedliner so I didn't use the pads. All 4 latches came preset on the middle position, and I had to adjust them to the outside position (closest to the bed wall) for best fit on my truck. This only required a phillips screwdriver to move. Along with a knife to cut the weather strip, those were the only tools I used during installation. What I did not expect, was that the rear latch handles on the Tyger Auto tonneau cover are too long to use with the AMP Research bed extender I had installed. With the bed extender folded into the truck, there was no way to latch the tonneau cover shut. Thankfully the latches are only plastic and held on by a threaded nut. After marking them for clearance, I used a small hacksaw to cut them to size and smoothed up the edges with some fine grit sandpaper. This allowed me latch the tonneau cover shut completely with the bed extender folded in. Be aware this might void the warranty. Overall I am very satisfied with the cover. I do wish Tyger Auto would make the rear latches shorter, but once I made that small modification, it allowed me to have an affordable high quality tonneau cover with bed extender.

The cover fits well and looks very nice. It is very easy to install and remove. Only gave it 4 stars because the rear seal makes the tailgate too tight and it takes some effort to open it. I am hoping that it collapses some over time but it will be an inconvenience until then. I think the manufacturer should install a narrower rear seal to prevent this from happening. Other than that, it is a really nice cover.

I am very pleased with the product at this price point. It was as advertised, fitting very well, easy to install, and looking really nice when done. It's a nice addition to my truck.

Received the product today and immediately installed it. Packaging was well done. It came in a card box box and inside the box I found the item in a storage bag which can be reused if there a need to remove from the vehicle and store it away. Inside the box was the item, seal strip, and clamp pads (in case you need them). Installation was a breeze. It took me all of about 15-20 minutes to install and I was going slow. All clamps are attached to the item, and no tools are required. Just put your seal down in the front of the box (if needed) place the item down and line it up. Once it’s all lined up fold it back and clamp it down to the bed, add the safety clamps, unfold the item again, clamp the back down, close the lift gate and your done. The item looks great and is well done. It’s a great fit on a 2019 Ram 1500 Classic Tradesman. Everything fits snugly. Folding is easy. In terms of security, the tail gate locks, so it’s as secure as it can be with a vinyl cover. Looks great on the truck. I’m very happy and I recommend this item.

I recently installed the Tyger Auto T3 Tri-Fold Truck Bed Tonneau Cover on my truck, and it has been a fantastic addition! The cover is made of heavy-duty marine-grade vinyl, which provides excellent durability and protection against harsh weather conditions. The tri-fold design allows for easy access to the truck bed while maintaining security for my cargo. The installation was straightforward and required no drilling, which was a huge plus. The cover fits snugly and securely, and the weather-sealed edges keep my cargo dry. The sleek and aerodynamic profile not only enhances the appearance of my truck but also improves fuel efficiency.

Perfect fit and easy to fit

Excelente facil de instalar y muy ligera

Great cover easy to install and one day delivery.

Fantastic quality. Save your money and dont purchase the expensive ones. This is easy to install. Keeps water out and is easy to use and remove. Quality for your dollar.