Olson Saw FR49400 Skip Tooth Scroll Saw Blade Assortment,36

Work as expected

Nice set carbon steel to be clear and on my scrawl saw it really does the job . This company does good stuff.

Having used Olson saw blades before in jeweler's saw frames and fret saw frames, this is the company I go to to do the job right. This is an assortment pack with #'s 2,5, and 7 blades with 20 TPI (teeth per inch) for the size 2, 12.5 TPI for the size 5, and 11.5 TPI for the size 7. the cutting thicknesses are from 3/16ths to2 inches thick. Will cut hard and soft woods and nonferrous metals if sandwiched between 2 sheets of waste board. From my experience, I used it on bone, horn and antler, some exotic woods and 10-12 gauge copper and sheet silver. It does cut cleanly and I never experienced burrs in the metal. Did not experience chip out on the other materials. In my thinking and based on my experience, you can't go wrong with Olson scrollsaw blades.

This blades were included along with a WEN scroll saw an a foot pedal, but the blades don't fit a Wen model 3922.

It is a good blade pack for what they are. But remember, they are designed for smaller pieces of wood and will eventually wear out. I like that they come in packs so you do not have to buy a new blade right away. This is a good beginner level blade for beginner level machines if you want to cut only small pieces of wood. For metal or larger pieces of wood, you might want to consider upgrading your machine and blade to a heavier more professional level machine and blade.

Nice blades for cutting thine steel on my saw.

Very durable. Very sharp! Very versatile. I’ve been able to cut out all sorts of shapes with these. They make tight-radius turns easy in thick wood. Pictures are two jumble pack puzzles I made using various types of 3/4” wood. As you can see, these blades allowed me to make very precise cuts in a variety of woods.

I use these with my Knew Concepts 5" woodworker fret saw, specifically the 20 tpi blades. They are the absolute best blade for sliding into a kerf and cutting away waste in dovetail joints. I have cut well over a hundred joints using a single blade and it is showing no signs of slowing down. To have so many in a pack makes me feel like this is a once in a lifetime purchase.

Buen producto a buen precio. Si estas abrumado por la cantidad de opciones que hay y no sabes qué tipo de seguetas comprar te recomiendo hacer lo que yo. Entre a la página oficial de la marca y desde ahí descargue el catálogo de productos. Está muy bien explicado te dice que características de corte tiene cada tipo de segueta y para qué tipo de material y grosor se recomienda.

Good quality blades

Excelente qualidade, vai durar muito . Espero que fabrique com pino também.

Je les utilise en bijouterie pour faire des modeles en cire, pour scier les blocs et tubes. C est parfait, plus precis que les lames spirales mais ne reste pas collé dans la cire comme les lames classiques.

I've only used the 11.5tpi blade so far in my Record Power SS16V scroll saw to cut out shapes in spalted sycamore. It was much easier to follow the line with less blade drift than with other blades I've tried. The cut surface finish was incredibly smooth even with the coarsest of the 3 grades in the pack. I'll be using either the 12.5 or 20 tpi blades in my vintage jeweller's saw to do inlays and other fine work. I also like that I can keep the blades in their original pack, making it much easier to choose the right one for the job while protecting them from damage. I think I'll be sticking to Olson blades from now on.