Starter Kit Combo - 4oz/120mL LOCA Remover + 2oz/60mL LCD Polish + 25 LCD Wipes

Description

This is the strongest LOCA Remover on the market. It begins breaking down the glue within seconds. The bottle comes with a convenient squeeze top for easy use and storage. You can squeeze LOCA Remover directly onto the LCD or onto one of our Lent Free LCD Wipes. If you prefer, you can remove the squeeze top and dip your LCD Scrub Brush directly into the bottle. Close the squeeze top when not in use to keep any fumes from escaping. Specifications • Industrial Strength LOCA Remover • 4oz Bottle (240ml) • Convenient Squeeze Top • Begins working within seconds • Will not eat away or damage the LCD or Digitizer Directions 1. Use a toothbrush and tweezers to remove any remaining glass shards (they can be very hard to see, so run your finger over the screen to make sure you don't feel any glass) 2. Squeeze a few drops onto the LCD (only use a little at a time) 3. Wait 30 Seconds 4. Gently scrub with LCD Scrub Brush until the LOCA loosens and starts to dissolve 5. Remove any big chunks of glue with a plastic razor blade or credit card 6. Wipe off remaining LOCA with our Lent Free LCD Wipes LCD Polish is what you need to finish your LCDs the right way. Even the best LOCA Removers/Cleaners can leave streaks or a little bit of a foggy haze on the LCD. LCD Polish is a fast drying streak-free polish that eliminates any streaks or fogginess and brings out the original shine of the LCD. To be used AFTER the LOCA has been removed using LOCA Remover (“sold separately”, or “included” depending on the listing) 1. Make sure there is no glue remaining on the LCD (test by rubbing a dry cleaning wipe and checking to make sure nothing smears, especially around the edges) 2. Apply LCD Polish to a cleaning wipe to get it damp 3. Wipe over the whole LCD a once or twice 4. Then immediately wipe over the whole LCD once or twice with a dry cleaning wipe