Eytool 5M Clear Door Edge Protectors, Rubber Edge Trim Seal Protector with U Shape Car Protection Door Edge Guard Fit for Most Car (Clear, 16.4FT)

Great product, worked well on the door edge. Very easy to install, and the size did not interfere with the door gap.

I got this to try to protect the door edges of my new Model Y, as my garage is pretty cramped. I was concerned about how well it would adhere due to other reviews, but I took a chance since it's cheap. I also decided on this over door edge paint protection film since it is easier to apply and a lot thicker. Surprisingly, it's been several days and the edge guards are still perfectly adhered. Granted, I haven't driven much yet, but it's already an improvement over those who said it fell right off. I was pretty careful about the application, though. This was my process: 1. With the film still on the adhesive, I fit the guard to the door and cut to length. Don't try to cut the guard directly on your door or you'll damage the paint! 2. Not having isopropyl, I cleaned the door edge with Invisible Glass and paper towels, inside and out, making sure it was dry afterward. 3. I peeled off a short length of the protective film covering the adhesive foam and started fitting it back on the door from top to bottom, slowly pulling the film away as I went. THE ADHESIVE GOES ON THE INSIDE OF THE DOOR! The adhesion wasn't super strong at first, so I had to hold the adhered portion with one hand while fitting a new section onto the door. 4. While fitting, I made sure to pinch the door guard onto the door's front and back while also pressing it onto the edge -- if you just press onto the door edge parallel to the surface of the door, the adhesive won't stick well. 5. Since my garage was cold (~40F), I then took a hairdryer on high temperature but low airflow and warmed the edge guard in sections ~4" long. I counted to ten before moving to heating the next section. While the next section heated, I would then use my other hand to again pinch the front and back of the door guard together to make sure the adhesive was stuck fast. I worked slowly like this from top to bottom. 6. I repeated all of these steps on the next door. The Model Y front door edges are almost completely straight, but the back doors have a pretty sharp bend to go around the wheel wells. The edge guards buckled slightly at this location, but they are rubbery enough to not leave a gap. The white color is somewhat whiter than Tesla's white paint, but it doesn't look off-putting. I chose white rather than clear so that any dirt that may collect inside the guards won't show through. It has yet to be seen how durable these are in the long run, particularly in the rain or after extended UV exposure. I'll update the review if I notice any problems. Also, for what it's worth, the protective film on the adhesive foam layer was printed with the 3M logo. I hadn't seen any mention of that in the listing or other reviews, so it gave me a bit more confidence in the product.

I recently purchased a set of clear door guards for my car, and I am thoroughly impressed! These guards offer excellent protection for my vehicle’s doors without compromising the look of my car. The clear, transparent design blends seamlessly with the car’s exterior, making them practically invisible while still providing essential protection against dings, scratches, and chips from nearby obstacles. The installation was quick and easy, and the adhesive backing is strong, ensuring they stay securely in place. I especially appreciate how they protect the door edges, which are typically vulnerable to damage in tight parking spaces. Plus, the material is durable and resistant to wear and tear, so I can trust these guards to last a long time. Overall, I highly recommend these clear door guards to anyone looking to protect their vehicle’s paint and maintain a clean, polished appearance. They’re practical, easy to install, and highly effective! Easy to cut and adjust. Long enough.

Most cars have a bead of mastic where the outside door panel is bent around the inside panel during manufacture. This creates a ridge and the amount of Eytool door protective with the adhesive on has no chance of making a bond with the inside of the door panel. The part with the adhesive on needs to reach at least three times as far to get a good grip over the strip of mastic. Eytool strip needs to be redesigned - go back to the drawing board. The photos show the mastic strip on my car (VW Tiguan), the red strip covers the adhesive, this needs to be three times as wide. I’ve cut the part of the rubber strip off that goes on the out side of the car for clarity purposes.

Worked great. Easy to install. Good price. Good quality product, not cheap thin stuff..

Absolute garbage, came all twisted and kinked and it doesn’t straighten up, also the sticker doesn’t work at all, complete waste of money

Very easy to install, protects edge of the door from bumps.

Protege muy bien el borde de las puertas del coche

Molto facili da installare e soprattutto non si staccano col tempo. La colla non è mai colata, nonostante un paio di estati caldissime e la gomma non si è ingiallita. Ottimo prodotto

Useless plastic strip. Came off flying in first ride only. Was left on one door only & GATHERED dust very fast.