Trewax Paste Wax with Carnauba Wax, Clear, 12.35-Ounce, Ideal on Hardwood Floors, Fine Furniture, Granite, Marble and Bronze

I always useJohnson paste wax unfortunately they don’t make it anymore or if you can find.it the price is astronomical. I just use the trewax applying it by hand and using my buffer. The wax is slightly thinner than Johnson, but does a very good job. I would not hesitate. to buy it again.

I used it to refinish a floor in 100 year-old house that was originally wax so I wanted to use wax again. It was not an easy process, but it wasn’t horrible. I did it by hand because the room was not that big and I don’t have to be in any hurry so I can do one room at a time. I’m going to do another bedroom soon. This beautiful floor was under my carpet.

I saw this suggested to put on a table saw top for cutting, and honestly, its almost toooo good. I barely applied any of it - a little goes a long way. I can see using this for a ton of other things as well, and this container size is pretty much a life time supply unless you dont seal it properly.

WE USE THIS AROUND THE WOOD SHOP FOR PROTECTING METAL TOOL SURFACES LIKE TABLE SAWS, PLANERS, AND JOINTERS, AND ON SMALL TOOLS LIKE HAND PLANES. IT HELPS KEEP THE SURFACES FROM RUSTING WHICH KEEPS THEM SMOOTH, AND KEEPS THE TOOL AND THE WORKPIECE GLIDING OVER EACH OTHER WITHOUT TOO MUCH RESISTANCE. I WOULDN'T SAY IT IS A DIRECT REPLACEMENT FOR THE OLD SC JOHNSON PATE WAX BUT IT IS CLOSE. THIS ALSO WORKS PRETTY GOOD IF YOU STILL USE WAX ON ANY OF YOUR FURNITURE OR WOOD WORK AT HOME.

I started my new hobby of chalk painting recently. I decided to do some research on the best type of wax to use. Most people recommended Annie Sloan or Minwax but the price made me hesitant. So I found Trewax on Amazon and noted how much cheaper the two pack was compared to anything else for one jar (probably half the price!). So, I figured Amazon has a great return policy and I wasn't risking much. While reading reviews, I noted people saying how this wax was much harder than other waxes--specifically Annie Sloan's soft wax. I was so eager to use it, I started right when it arrived. It was definitely hard and I had to put a lot of elbow grease into waxing my current project. I alternated between using my waxing brush and the yellow pad included with the Trewax. I like the yellow pad a lot for smooth surfaces, easier to get in the grooves. After some time, I realized I should try the wax after it had acclimated to room temperature. This is the key to this wax I've found. I keep my house around 69-70 degrees. Storing the wax inside the house has made a huge difference in it's performance. It is much easier to apply and much much easier to buff. I've included a picture of some frames I've chalk painted and waxed using Trewax. I plan to make an empty frame wall with them. For the frames shown, I used a waxing brush to get in the grooves because of all the details. For something like a side table with a flat surface, the yellow pad that comes with the Trewax would be sufficient. Overall pros and cons: Pros: cost effective, comes with yellow pad that's great for applying to flat surfaces, great application, a little goes a long way Cons: harder wax, needs to acclimate the wax to room temperature to get the best consistency and application

Smooth and easy to apply. Takes a while to dry to a haze so be patient. Nice finish. I use it on my steel products and tools.

Came cracked, crumbled, all bent out of shape, and a strong chemical smell like other reviewers stated, came with the old logo as well. Now that that parts done, I've been using this to coat my woodworking machine surfaces for two reasons: to make the surfaces slick and to keep rust away. It is doing both well, but I will say I feel like I am going through a lot of it compared to what people say (that it should last years) I just don't see that happening. id say it is easy to use, and does take some patience if you want the expected outcome. I apply a thick layer and push it into the surface with a cotton rag, I wipe of the excess leaving a nice film and leave on for 10-15min. I then come back using the same rag and do it over again, eventually you'll have a nice film of wax and things will glide smoothly across it. now typically you want to start with thin applications but that didn't work with this sample of trewax I received- which is why I rated it 3 stars because of the condition and something doesn't feel quite right.

Works well nice shine good protection on floor

I did not buy it for my floor but to wax gunstocks. You can buy "gunstock" wax and get a small bottle for about the same price as one of these tubs. When I clean and restore vintage military firearms, after the linseed oil has dried an application of this wax serves both to protect the wood and bring it back to life. It dries fairly quickly to a hard finish and can be buffed to a sedate gloss. The only drawback is that you need to heat it up to around 80 - 90F to be able to apply it easily. Ditch the expensive "gunstock" wax and use this product, you will be pleased and save money in the process.

I got this to put on my crosscut sled and other wood working jigs. It is fantastic. Protects the wood from moisture and creates a smooth surface. It does require effort to work in, so be patient.

Expect delays when ordering, make sure you know when your item is due then you won't be disappointed because the item is top quality 👌

I've been looking for this for a long time, I only found floor polish that would last but this product is much easier to us, has no smell and leaves a perfect finish on the dining table.

Polir le winnebago