Spurtar Vernier Caliper Gauge 0-150mm 0-6" Precision Calipers Measuring Tool Accuracy 0.02mm/0.001" for DIY/Household/Industrial Use with Storage Case

In the past, I have spent more on digital callipers which were poorer quality than these. A proper vernier like this one never has flat batteries. There is a pleasing mystique in knowing how to measure accurately to a fraction of a millimetre by reading the vernier scale. These callipers read 0 mm when closed (so they zero correctly) and they move smoothly. They have a reassuring solidity. They come in a reasonably protective plastic case, with a bonus steel rule. Far easier to read than the cheap vernier I've had for many years, and far more reliable than the expensive digital ones I've thrown away. Pleased with my purchase.

Very good product for the money. I was concerned that the accuracy would be off, but turns out it is super precise and I have been able to maker some very precise fittings using this tool. A good purchase.

I've been meaning to get a pair of calipers for home DIY/projects for some time. I'm not planning to use them often — but when I need them, I really need them. I chose a set of purely mechanical calipers with Vernier (Nonius) scales rather than a digital pair, as I would not want to come back to them after several months only to find the battery was flat. I chose these Spurtar ones because they fit my requirements and are made of steel. So far, for a few measurements for projects at home, they seem very good and exactly what I need. There are scales in imperial (inch) measurements and metric (cm, mm). The sliding action is smooth (so far — no bits of grit etc have got in), and the scales (including the Vernier) are clear enough to read easily. They arrived in a blue plastic case, with instructions, a small cloth and a six-inch/15cm ruler (see attached picture). These are a bit more expensive than some similar items, but my impression of them so far is that they should be a "one and done" purchase. The only thing I'd note is that there is a fractional gap between the external calliper jaws when they are closed: they meet at the end, but there is a gap you can see in the attached picture. It is only about a hair's width, and makes no difference to the measurements at the tolerances I am working to, but if you are doing very precise machining or 3D printing, you'll want to be aware of this. For my purposes, highly recommended.

Good value, Good quality just what you need for fine measurements

Exceeded expectations by a wide margin. Given the price, I wasn't overly optimistic but this is actually very good if what you're after is a reasonably accurate way of measuring. I would seriously doubt the claimed accuracy of 0.02mm but if a figure accurate to the nearest quarter or half a millimetre is good enough then this easily does the job. It's solidly made, nicely weighted and comes in a carry box that will suffice for most people's likely use. I like the fact that it doesn't require batteries and so is 'always ready' out of the box. The scales are clear but in quite a small font - so reading glasses at the ready! All in all - Recommended.

Got this tool for a specific measuring task (Its one of those tools that as a standard DIYer, you only need very occasionally - but when you need it...!). Seems well made and accurate. I'll probably use it once a year at most, but its a useful thing for the toolbox.

Not sure what I was expecting for the price but they're not bad for the occasional measurement to maybe 0.1 or 0.2mm accuracy. Don't expect the 0.03mm accuracy quoted in the spec, never mind the 0.02mm accuracy quoted in the title. The jaws do not close totally together at zero. I would have had a slightly better opinion of them had they not tried to make it look like they had an adjusting thumbwheel, it's a fake!

I have two digital calipers which agree on the readings with this item to within 0.05mm. So it's not the 0.02mm accuracy it promises, but good enough for hobby use in the 3D printing context. The main advantage is these do not need batteries, and are more convenient to use. The jaws aren't perfectly aligned at the opening side, which is maybe why the accuracy is affected. Might not be good enough for machining work if you need very tight tolerances. But that's what a micrometer is for anyway. Overall reasonable value for money.

Den är bra

サイズ確認や細かい測定のために購入しましたが、とても使いやすく、目盛りも見やすいです。動きもスムーズで、必要な寸法をしっかり測れました。価格を考えると十分満足できる品質で、家庭用にも作業用にも便利だと思います。買ってよかったです。

Nadat ik mijn twijfels had gekregen over de nauwkeurigheid van de gemiddelde elektronische schuifmaat, weer een ouderwets model aangeschaft. Prima mee te werken, en goed af te lezen. Voelt solide aan, werkt altijd als ik hem nodig heb (geen lege batterij), en afleesbaar tot op 0,02 mm!! Onder de indruk!

Esta muy bien la calidad y el precio! Ideal para el uso diario

Bonjour, qualité et finitions , très bien. Longueur suffisante en ce qui me concerne. Merci